Product Selector

14 Results Found

Twin-Task® 3AAA LASER LED
  • Pre-focused visible red Laser cartridge. C4® LED technology, with a 50,000 hour lifetime. Five ultra-bright white LEDs with 100,000 hour lifetime.
  • 2 modes:
    C4 LED – 2000 candela peak beam intensity, 100 Lumens, 2.75 hours runtime
    5 LED – 800 candela peak beam intensity, 68 Lumens, 5.25 hours runtime
  • Push-button sequences through four positions — Laser only, C4® LED, Laser/C4® LED combo, or five ultra-bright white LEDs.


    CuffMate®
    • Compatible with most handcuff brands
    • Made of virtually indestructible fiberglass-reinforced polymer
    • Swiveling key ring connector for extra convenience


      Nano Light®
      • Easily attaches/detaches to just about anything with convenient pocket clip or key ring
      • Up to 8 hrs. run time
      • Machined aircraft-grade aluminum with anodized finish


        Streamlight Jr.® LED
        • 1 watt C4® LED, 50,000-hr. LED
        • Up to 3800 candela (peak beam intensity) and 85 lumens measured system output
        • Runtime to the 10% output level:
          "AA" Alkaline Batteries – 4 Hours
          "AA" (L91) Lithium Batteries – 5.25 Hours


          Stylus Pro Reach®
          • White C4® LED technology, impervious to shock
          • 825 candela peak beam intensity, 38 lumens
          • Uses two easily-sourced AAA alkaline batteries (included)
          • Eight-inch (20.32 cm) flexible polyethylene-coated extension cable allows for 14" (35.56 cm) of reach


          Stylus Pro®
          • White C4® LED delivers 65 lumens; 690 candela; runs 6.5 hours
          • Push button tail switch – momentary or constant on operation
          • Includes two "AAA" alkaline batteries and tear-resistant nylon holster
          • Type II MIL-SPEC abrasion and corrosion-resistant anodized aircraft aluminum construction with unbreakable, scratch-resistant polycarbonate lens


          Vantage®
          • Lightweight, compact, low profile design easily attaches/detaches above or below brim on fire helmets, industrial helmets and hard hats
          • C4® LED delivers 7,000 candela peak beam intensity; 115 lumens; 167 meter beam distance
          • Run 6 hours to the 10% output level
          • Features an ultra-bright blue taillight LED


          TLR-2® G
          • C4® LED technology, impervious to shock with a 50,000 hour lifetime; Highly visible 522-542 nm green laser
          • C4 LED delivers 6,300 candela peak beam intensity; 200 lumens
          • Textured parabolic reflector produces a concentrated beam with optimum peripheral illumination
          • Runs 1.5 hours (LED only); Runs 1.25 (LED/Laser combo); Laser only function runs 9 hours


          TLR-2® IR Eye Safe
          • Illumination sources:
            • High Power IR LED
            • Infrared Laser
          • Solid State current regulation for consistent illumination level
          • Three position mode selector switch (IR Laser only, IR Illuminator only, both)


          3AA ProPolymer® HAZ-LO®
          • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
          • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
          • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
          • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


            4AA ProPolymer® Lux Div 1
            • C4® LED technology, with a 50,000 hour lifetime.
            • Unbreakable polycarbonate lens with scratch-resistant coating.
            • 100 lumens typical; up to 4,200 candela peak beam intensity.


              3AA ProPolymer® HAZ-LO®
              • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
              • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
              • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
              • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                3AA ProPolymer® HAZ-LO®
                • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                  4AA ProPolymer® Lux Div 1
                  • C4® LED technology, with a 50,000 hour lifetime.
                  • Unbreakable polycarbonate lens with scratch-resistant coating.
                  • 100 lumens typical; up to 4,200 candela peak beam intensity.

                     
                    ; Cache: True
                     Page:  Flush: