Product Selector

25 Results Found

Survivor® (Alkaline Model)
  • Click here for Data Sheet
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes:
    • High for a super-bright beam that pierces through smoke
    • Low for bright light and longer run time
    • Flash for signaling
    • Moonlight mode provides low-level lighting for battery conservation
  • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
  • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Knucklehead® Spot (Alkaline Model)
  • Click here for Data Sheet
  • Shockproof C4® premium LED technology combined with a deep dish parabolic reflector produces a focused beam for longer distances – 210 meters on high beam.
  • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
  • Features a 210 degree articulating head that rotates a full 360 degrees


ProTac® Rail Mount 1
  • Click here for Data Sheet
  • Dual fuel - uses one AA alkaline or CR123A lithium battery (both included); also accepts AA lithium
  • Strobe for signaling or disorienting
  • TEN-TAP® Programming - choice of three operating modes: 1.) high/strobe; 2.) high only; 3.) low/high
  • Remote pressure switch features momentary and “constant on” operation
  • Integrated rail clamp attaches to MIL-STD-1913 rails


Nightfighter® X
  • C4® LED technology, with a 50,000 hour lifetime.
  • 3 modes:
    High – 11,000 candela peak beam intensity, 200 Lumens, 2.5 hours runtime
    Low – 550 candela peak beam intensity, 10 Lumens, 50 hours runtime
    Strobe
  • Multi-function, push-button tactical tailswitch. One handed operation of momentary, variable intensity or strobe mode.


    Scorpion® X
    • C4® LED with high, low and strobe functions
    • Multi-function, push-button tactical tail switch
    • Durable, anodized aluminum construction with enhanced rubber-armored sleeve; textured for a sure grip with gloved hands and in any environment; O-ring sealed glass lens
    • LED Solid State Power Regulation provides maximum light output throughout battery life.
    • Anti-roll head design prevents the light from rolling away when you set it down


    Super Tac® X
    • C4® LED, with a 50,000 hour lifetime.
    • 3 modes:
      High – 40,000 candela peak beam intensity, 200 Lumens, 2.5 hours runtime
      Low – 2000 candela peak beam intensity, 10 Lumens, 50 hours runtime
      Strobe
    • Deep-dish parabolic reflector produces a long range targeting beam with optimum peripheral illumination to aid in navigation. Optimized electronics provide regulated intensity.
    • Multi-function, push-button tactical tailswitch. One handed operation of momentary, variable intensity or strobe mode.


      TL-2® X
      • C4® LED technology, with a 50,000 hour lifetime.
      • 3 modes:
        High – 11,000 candela peak beam intensity, 200 Lumens, 2.5 hours runtime
        Low – 550 candela peak beam intensity, 10 Lumens, 50 hours runtime
        Strobe
      • Multi-function, push-button tactical tailswitch. One handed operation of momentary, variable intensity or strobe mode.


        ProTac® Rail Mount 1
        • Click here for Data Sheet
        • Dual fuel - uses one AA alkaline or CR123A lithium battery (both included); also accepts AA lithium
        • Strobe for signaling or disorienting
        • TEN-TAP® Programming - choice of three operating modes: 1.) high/strobe; 2.) high only; 3.) low/high
        • Remote pressure switch features momentary and “constant on” operation
        • Integrated rail clamp attaches to MIL-STD-1913 rails


        TLR-2®
        • Powered by two 3-volt CR123 lithium batteries with 10-year storage life
        • C4® LED Technology, impervious to shock with a 50,000 hour lifetime.
        • Up to 12,000 candela peak beam intensity and up to 300 lumens measured system output.
        • Up to 2.5 hrs runtime; LASER ONLY runs 48 hours.


        TLR-2®s
        • Powered by two 3-volt CR123A lithium batteries with 10-year storage life
        • C4® LED with blinding beam (up to 12,000 candela peak beam intensity and up to 300 lumens measured system output) with optimum peripheral illumination – will not break or burn out!
        • Strobe model with user programmable strobe enable/disable
        • Up to 2.5 hr. Run Time


        TLR-VIR®
        • Click here for Data Sheet
        • Illumination sources:
          • Visible C4® LED, impervious to shock with a 50,000 hour lifetime
            • 12,000 candela peak beam intensity; 300 lumens; runs 2.5 hours
            • Deep dish parabolic reflector produces a concentrated beam with optimum peripheral illumination
          • Infrared illuminator - 850 nm LED. Shock-proof with a 20,000 hour lifetime
            • 1000mW/sr (min) radiant intensity providing optimum illumination when using night vision equipment; runs 20 hours
        • Solid-state current regulation for consistent illumination level
        • 6000 series anodized machined aircraft aluminum body with high impact, chemically resistant engineering polymer IR LED housing


        4AA ProPolymax®
        • TEN-TAP® programmable switch allows user selection of one of three different programs:
          • high/low/strobe (factory default)
          • high only
          • low/high 
        • C4® LED output:
          • High: 300 lumens; 17,000 candela; runs 2.75 hours
          • Low: 50 lumens; 2,500 candela; runs 24 hours
          • Strobe runs 6 hours
        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


        Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
        • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
        • Features a 210 degree articulating head that rotates a full 360 degrees
        • 4 lighting modes
        • Optimized electronics provide regulated intensity


        Survivor® (Alkaline Model)
        • Click here for Data Sheet
        • Available in rechargeable and alkaline models
        • Features C4® LED technology with four lighting modes:
          • High for a super-bright beam that pierces through smoke
          • Low for bright light and longer run time
          • Flash for signaling
          • Moonlight mode provides low-level lighting for battery conservation
        • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
        • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


        Survivor® (Low Profile) ATEX (Alkaline Model)
        • Rated for Zone 0. The redesigned Survivor features a low-profile bezel that doesn’t interfere with gear and equipment. We also redesigned the clip and added a reinforced D-ring so your light hangs forward
        • Available in rechargeable and non-rechargeable models
        • Features C4® LED technology with four lighting modes: High, Low, Flash and Moonlight
        • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
        • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation
        • Optimized electronics provide regulated intensity
        • IP66 water-resistant; 2 meter impact resistance tested


        Survivor® LED (Alkaline Model)
        • ATEX-rated for Category 1G (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <135°C
        • Available in rechargeable and alkaline models
        • Features C4® LED technology with four lighting modes: High, Low, Flash and Moonlight
        • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications
        • Optimum peripheral illumination to aid in navigation
        • Spring loaded clip with built-in ring easily attaches to belts and harnesses
        • IP54 water-resistant; 2 meter impact resistance tested


        Knucklehead® HAZ-LO® – Spot Model
        • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
        • Features a 210 degree articulating head that rotates a full 360 degrees
        • 4 lighting modes
        • Optimized electronics provide regulated intensity


        Polystinger® LED HAZ-LO®
        • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
        • 3 modes:
          High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
          Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
          Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
        • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


          Survivor®
          • Click here for Data Sheet
          • Available in rechargeable and alkaline models
          • Features C4® LED technology with four lighting modes:
            • High for a super-bright beam that pierces through smoke
            • Low for bright light and longer run time
            • Flash for signaling
            • Moonlight mode provides low-level lighting for battery conservation
          • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
          • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


          Survivor® (Low Profile) ATEX
          • Rated for Zone 0. The redesigned Survivor features a low-profile bezel that doesn’t interfere with gear and equipment. We also redesigned the clip and added a reinforced D-ring so your light hangs forward
          • Available in rechargeable and non-rechargeable models
          • Features C4® LED technology with four lighting modes: High, Low, Flash and Moonlight
          • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
          • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation
          • Optimized electronics provide regulated intensity
          • Industrial rechargeable lithium ion battery can be recharged up to 1,500 times. Also accepts four "AA" alkaline or lithium non-rechargeable batteries
          • IP66 water-resistant; 2 meter impact resistance tested


          Knucklehead® HAZ-LO® – Spot Model
          • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
          • Features a 210 degree articulating head that rotates a full 360 degrees
          • 4 lighting modes
          • Optimized electronics provide regulated intensity


          Knucklehead® Spot
          • Click here for Data Sheet
          • Shockproof C4® premium LED technology combined with a deep dish parabolic reflector produces a focused beam for longer distances – 210 meters on high beam.
          • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
          • Features a 210 degree articulating head that rotates a full 360 degrees


          Polystinger® LED HAZ-LO®
          • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
          • 3 modes:
            High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
            Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
            Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
          • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


            Survivor®
            • Click here for Data Sheet
            • Available in rechargeable and alkaline models
            • Features C4® LED technology with four lighting modes:
              • High for a super-bright beam that pierces through smoke
              • Low for bright light and longer run time
              • Flash for signaling
              • Moonlight mode provides low-level lighting for battery conservation
            • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
            • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation

             
            ; Cache: True
             Page:  Flush: