Product Selector

3 Results Found

2AA ProPolymer® Xenon
  • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
  • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
  • Powered by two "AA" alkaline batteries (included)
  • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
  • IP57 rated design; dust and water ingress protected


4AA ProPolymer® Xenon
  • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
  • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
  • Powered by four "AA" alkaline batteries
  • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
  • Push-button tail switch for momentary or constant “on”
  • Waterproof/Dustproof IP65


Fire Vulcan® LED
  • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <120°C Gas, 65°C Dust.
  • Features C4® LED, impervious to shock with a 50,000 hr lifetime and two ultra-bright blue taillight LEDs
  • 2 levels of light output
  • Deep-dish parabolic reflector produces a tight beam with optimum peripheral illumination to aid in navigation; Optimized electronics provide regulated intensity
  • Two lightweight lithium ion nanotechnology cells; recharges in 5 hrs
  • 8 programmable switch functions
  • Waterproof/Dustproof IP66

 
; Cache: True
 Page:  Flush: