Product Selector

6 Results Found

Multi Ops®
  • Shock-proof C4® LED design – 2-3x Brighter than a High Flux LED!
  • Light Output and Runtime:
    C4® LED – Impervious to shock with a 50,000 hour lifetime; 2500 candela peak beam intensity; 50 lumens; 4.75 continuous hours to 10% of initial lumen output.
    Five (5) 390nm UV LEDs – 40mw measured system output; 10 continuous hours to 10% of initial output power.
    Visible Red Laser – 650nm, Class IIIa (3R), <5mW laser output power, useable laser range of 100+ feet when in LED/Laser mode, 100+ yards when in Laser Only mode; 40 continuous hours.
    White C4 LED/Laser Mode – 4 continuous hours.
  • Powered by 3 "AAA" alkaline batteries (included)


    Stylus Pro Reach®
    • White C4® LED technology, impervious to shock
    • 825 candela peak beam intensity, 38 lumens
    • Uses two easily-sourced AAA alkaline batteries (included)
    • Eight-inch (20.32 cm) flexible polyethylene-coated extension cable allows for 14" (35.56 cm) of reach


    Septor® HAZ-LO® Headlamp
    • Meets lighting needs for a “up close” work when  seeing details is important
    • Features 7 white 5mm LEDs with low and high lighting modes
    • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


    Septor® HAZ-LO® Headlamp
    • Meets lighting needs for a “up close” work when  seeing details is important
    • Features 7 white 5mm LEDs with low and high lighting modes
    • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


    Septor® Headlamp
    • Meets lighting needs for a “up close” work when  seeing details is important
    • Features 7 white 5mm LEDs with three lighting modes:
      • 7 LEDs for a soft flood light for tasks at arm’s length: 120 lumens, 900 candela peak beam intensity, 3.5 hour run time
      • 3 LEDs for light without the glare and longer run times: 45 lumens, 375 candela peak beam intensity, 10 hour run time
      • 1 LED for extended run times and when a less intense beam is ideal: 13 lumens, 100 candela peak beam intensity, 55 hour run time
    • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


    Septor® HAZ-LO® Headlamp
    • ATEX and IECEx-rated for Category 1G (Zone 0) explosive gas group IIA locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is continually present. It has a maximum adverse surface temperature of 135°C
    • ATEX and IECEx-rated for Category 2G (Zone 1) explosive gas group IIB locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of 135°C
    • Meets lighting needs for “up close” work where seeing details is important; provides a soft, wide beam to flood your work area with light that won’t tire out your eyes.
    • Features 7 white 5mm LEDs with two lighting modes - Low and High
    • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation
    • 90º tilting head features a robust ratcheting system; prevents neck fatigue

     
    ; Cache: True
     Page:  Flush: