Product Selector

9 Results Found

Multi Ops®
  • Shock-proof C4® LED design – 2-3x Brighter than a High Flux LED!
  • Light Output and Runtime:
    C4® LED – Impervious to shock with a 50,000 hour lifetime; 2500 candela peak beam intensity; 50 lumens; 4.75 continuous hours to 10% of initial lumen output.
    Five (5) 390nm UV LEDs – 40mw measured system output; 10 continuous hours to 10% of initial output power.
    Visible Red Laser – 650nm, Class IIIa (3R), <5mW laser output power, useable laser range of 100+ feet when in LED/Laser mode, 100+ yards when in Laser Only mode; 40 continuous hours.
    White C4 LED/Laser Mode – 4 continuous hours.
  • Powered by 3 "AAA" alkaline batteries (included)


    Stylus Pro Reach®
    • White C4® LED technology, impervious to shock
    • 825 candela peak beam intensity, 38 lumens
    • Uses two easily-sourced AAA alkaline batteries (included)
    • Eight-inch (20.32 cm) flexible polyethylene-coated extension cable allows for 14" (35.56 cm) of reach


    3C ProPolymer® Xenon
    • Powered by 3 "C" alkaline batteries
    • 785 mA xenon gas-filled module
    • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


      3N ProPolymer® LED
      • Powered by 3 "N" alkaline batteries
      • 3 ultra-bright 100,000-hour life LEDs
      • LEDs provide up to 30 lumens, blue LEDs also available


        3C ProPolymer® Xenon
        • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
        • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
        • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
        • Waterproof/Dustproof IP65


        3N ProPolymer® LED
        • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <135°C.
        • 3 ultra-bright white 100,000-hour life LEDs deliver 30 lumens; runs 120 hours
        • Powered by three "N" alkaline batteries (included)
        • Anti-static, impact-resistant polymer construction


        3C ProPolymer® Xenon
        • Powered by 3 "C" alkaline batteries
        • 785 mA xenon gas-filled module
        • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


          3N ProPolymer® LED
          • Powered by 3 "N" alkaline batteries
          • 3 ultra-bright 100,000-hour life LEDs
          • LEDs provide up to 30 lumens, blue LEDs also available


            ClipMate®
            • Powered by 3 "AAA" alkaline batteries
            • Three high-intensity, 100,000-hr. life LEDs
            • 27 lumens typical (white LEDs)

               
              ; Cache: True
               Page:  Flush: