Product Selector

20 Results Found

Survivor® LED
  • ATEX-approved for Category 2 (Zone 1) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes
  • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications.
  • Industrial rechargeable NiCd battery can be recharged up to 1,000 times. Also accepts four "AA" alkaline non-rechargeable batteries for fast replacement with readily available batterie
  • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
  • IP54 water-resistant; 2 meter impact resistance tested


Knucklehead® HAZ-LO® – Flood Model
  • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Knucklehead® HAZ-LO® – Spot Model
  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Polystinger® LED HAZ-LO®
  • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
  • 3 modes:
    High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
    Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
    Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
  • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


    Survivor®
    • Available in rechargeable and alkaline models
    • Features C4® LED technology with four lighting modes:
      • High for a super-bright beam that pierces through smoke
      • Low for bright light and longer run time
      • Flash for signaling
      • Moonlight mode provides low-level lighting for battery conservation
    • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
    • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


    Knucklehead®
    • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
    • Shockproof dual C4® premium LED technology delivers 200 lumens
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 modes:
      High – 1150 candela peak beam intensity, 200 Lumens, 3.5 hour runtime
      Low – 350 candela peak beam intensity, 63 lumens, 16 hour runtime
      Moonlight – 20 day runtime
      Flash – 8 hour runtime


      Knucklehead® HAZ-LO® – Flood Model
      • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      Knucklehead® HAZ-LO® – Spot Model
      • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      Knucklehead® with Clip
      • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
      • Shockproof dual C4® premium LED technology delivers 200 lumens
      • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
      • Features a 210 degree articulating head that rotates a full 360 degrees

        SL


        SL-20L®
        • Deep-dish parabolic reflector produces a tight beam with optimum peripheral illumination
        • C4® LED technology, with a 50,000 hour lifetime
        • Select high, medium, low or strobe modes with multi-function, push-button switch


          SL-20LP®
          • Deep-dish parabolic reflector produces a tight beam with optimum peripheral illumination
          • C4® LED technology, with a 50,000 hour lifetime
          • Select high, medium, low or strobe modes with multi-function, push-button switch


            PolyStinger DS® LED
            • DUAL SWITCH TECHNOLOGY – Access three lighting modes and strobe via the tail cap or the head-mounted switch. Switches operate independently
            • Three modes and strobe:
              • High for a bright super-bright beam: 26,000 candela peak beam intensity; 385 lumens; runs 2 hours
              • Medium for bright light and longer run times: 13,000 candela peak beam intensity; 195 lumens; runs 3.75 hours
              • Low for when a less intense beam is needed and for extended run times: 6,500 candela peak beam intensity; 95 lumens; runs 7.25 hours
              • Strobe for disorienting or signaling your location; runs 5.5 hours
            • Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination; optimized electronics provides regulated intensity


            PolyStinger® LED
            • Multi-function On/Off push-button switch lets you choose three lighting modes and strobe; designed for extremely long life; tested at 1 million actuations
            • Three modes and strobe:
              • High for a bright super-bright beam: 26,000 candela peak beam intensity; 385 lumens; runs 2 hours
              • Medium for bright light and longer run times: 13,000 candela peak beam intensity; 195 lumens; runs 3.75 hours
              • Low for when a less intense beam is needed and for extended run times: 6,500 candela peak beam intensity; 95 lumens; runs 7.25 hours
              • Strobe for disorienting or signaling your location; runs 5.5 hours
            • Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination; optimized electronics provides regulated intensity


            Polystinger® LED HAZ-LO®
            • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
            • 3 modes:
              High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
              Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
              Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
            • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


              Stinger DS® LED
              • DUAL SWITCH TECHNOLOGY – Access three lighting modes and strobe via the tail cap or the head-mounted switch. Switches operate independently
              • Three modes and strobe:
                - High for a bright super-bright beam - 350 lumens; 24,000 candela peak beam intensity; 310 meter beam distance; runs 2 hours
                - Medium for bright light and longer run times – 175 lumens; 12,000 candela peak beam intensity; 219 meter beam distance; runs 3.75 hours
                - Low for light without glare and extended run times – 85 lumens; 6,000 candela peak beam intensity; 155 meter beam distance; runs 7.25 hours
                - Strobe for disorienting or signaling your location; runs 5.5 hours
              • Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination


                Stinger DS® LED HP
                • DUAL SWITCH TECHNOLOGY – Access three lighting modes and strobe via the tail cap or the head-mounted switch. Switches operate independently
                • Three modes and strobe:
                  - High for a far-reaching beam - 350 lumens; 56,000 candela peak beam intensity; 473 meter beam distance; runs 2 hours
                  - Medium for bright light and longer run times – 175 lumens; 28,000 candela peak beam intensity; 335 meter beam distance; runs 3.75 hours
                  - Low for light without glare and extended run times – 85 lumens; 14,000 candela peak beam intensity; 237 meter beam distance; runs 7.25 hours
                  - Strobe for disorienting or signaling your location; runs 5.5 hours
                • Deep-dish parabolic reflector produces a long-range targeting beam with optimum peripheral illumination


                  Stinger® LED
                  • Multi-function On/Off push-button switch lets you choose three lighting modes and strobe; designed for extremely long life; tested at 1 million actuations
                  • Three modes and strobe:
                    - High for a bright super-bright beam - 350 lumens; 24,000 candela peak beam intensity; 310 meter beam distance; runs 2 hours
                    - Medium for bright light and longer run times – 175 lumens; 12,000 candela peak beam intensity; 219 meter beam distance; runs 3.75 hours
                    - Low for light without glare and extended run times – 85 lumens; 6,000 candela peak beam intensity; 155 meter beam distance; runs 7.25 hours
                    - Strobe for disorienting or signaling your location; runs 5.5 hours
                  • Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination


                    Stinger® LED HP
                    • Multi-function push-button switch lets you choose three lighting modes and strobe
                    • Three modes and strobe:
                      - High for a far-reaching beam - 350 lumens; 56,000 candela peak beam intensity; 473 meter beam distance; runs 2 hours
                      - Medium for bright light and longer run times – 175 lumens; 28,000 candela peak beam intensity; 335 meter beam distance; runs 3.75 hours
                      - Low for light without glare and extended run times – 85 lumens; 14,000 candela peak beam intensity; 237 meter beam distance; runs 7.25 hours
                      - Strobe for disorienting or signaling your location; runs 5.5 hours
                    • Deep-dish parabolic reflector produces a long-range targeting beam with optimum peripheral illumination


                      Stinger® Lite Pipe
                      • Work light system features 8 high-power LEDs that produce a soft, 220 lumen flood pattern to illuminate your entire work area for 3.25 hours
                      • Available in a complete system, or if you already have a xenon Stinger, optional Lite Pipe Kit allows you to convert it to a Stinger Lite Pipe
                      • Ultra-thin design fits into tight spaces
                      • Removable, rotatable hang-hook allows you to use it as a drop light


                        Survivor®
                        • Available in rechargeable and alkaline models
                        • Features C4® LED technology with four lighting modes:
                          • High for a super-bright beam that pierces through smoke
                          • Low for bright light and longer run time
                          • Flash for signaling
                          • Moonlight mode provides low-level lighting for battery conservation
                        • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                        • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation

                         
                        ; Cache: True
                         Page:  Flush: