Product Selector

46 Results Found

Twin-Task® 3AA LED
  • C4® LED technology, with a 50,000 hour lifetime. Three ultra-bright white LEDs with 100,000 hour lifetime.
  • 2 modes:
    C4 LED – 2283 candela peak beam intensity, 100 Lumens, 5.75 hours runtime
    3 LED – 467 candela peak beam intensity, 33 Lumens, 34 hours runtime
  • IPX4 rated for water-resistant operation. All openings O-ring sealed. One meter impact resistance tested. Wrist lanyard.


    Twin-Task® 3AAA LASER LED
    • Pre-focused visible red Laser cartridge. C4® LED technology, with a 50,000 hour lifetime. Five ultra-bright white LEDs with 100,000 hour lifetime.
    • 2 modes:
      C4 LED – 2000 candela peak beam intensity, 100 Lumens, 2.75 hours runtime
      5 LED – 800 candela peak beam intensity, 68 Lumens, 5.25 hours runtime
    • Push-button sequences through four positions — Laser only, C4® LED, Laser/C4® LED combo, or five ultra-bright white LEDs.


      Task-Light® 3AA LED
      • Powered by 3 "AA" alkaline batteries
      • 1 watt C4® LED is 3 times brighter than a super high-flux LED – 95 lumens typical
      • Up to 16 hours run time


        Streamlight Jr.® LED
        • 1 watt C4® LED, 50,000-hr. LED
        • Up to 3800 candela (peak beam intensity) and 85 lumens measured system output
        • Runtime to the 10% output level:
          "AA" Alkaline Batteries – 4 Hours
          "AA" (L91) Lithium Batteries – 5.25 Hours


          Streamlight Jr.® Reach LED
          • Includes extension cable that allows for 14" of "reach"
          • Next generation C4® LED technology, impervious to shock with a 50,000 hour lifetime
          • Up to 1,600 candela peak central intensity and 85 lumens measured system output. Textured parabolic reflector produces an even, wide beam hotspot.
          • Up to 3.25 hours of run time to the 10% output level


            Survivor® (Alkaline Model)
            • Available in rechargeable and alkaline models
            • Features C4® LED technology with four lighting modes:
              • High for a super-bright beam that pierces through smoke
              • Low for bright light and longer run time
              • Flash for signaling
              • Moonlight mode provides low-level lighting for battery conservation
            • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
            • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


            Knucklehead® (Alkaline Model)
            • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
            • Shockproof dual C4® premium LED technology delivers 200 lumens
            • Features a 210 degree articulating head that rotates a full 360 degrees
            • 4 modes:
              High – 1150 candela peak beam intensity, 200 Lumens, 3.5 hour runtime
              Low – 350 candela peak beam intensity, 63 lumens, 16 hour runtime
              Moonlight – 20 day runtime
              Flash – 8 hour runtime


              Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
              • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
              • Features a 210 degree articulating head that rotates a full 360 degrees
              • 4 lighting modes
              • Optimized electronics provide regulated intensity


              Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
              • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
              • Features a 210 degree articulating head that rotates a full 360 degrees
              • 4 lighting modes
              • Optimized electronics provide regulated intensity


              Knucklehead® with Clip (Alkaline Model)
              • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
              • Shockproof dual C4® premium LED technology delivers 200 lumens
              • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
              • Features a 210 degree articulating head that rotates a full 360 degrees


                3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                • Kit includes:
                  • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                  • Streamlight Helmet Mount
                  • Rubber Helmet Strap


                ProTac® 1AA
                • Features Ten-Tap® Programming – Choose from three user selectable programs:
                  1.) high/strobe/low (factory default)
                  2.) high only
                  3.) low/high
                • C4® LED illumination output and run times:
                  HIGH - 70 lumens; 1,450 candela peak beam intensity; runs 2 hours
                  LOW – 5 lumens; 125 candela peak beam intensity;  runs 32 hours
                  STROBE – runs 4 hours
                • Solid State power regulation provides maximum light output throughout battery life


                ProTac® 2AA
                • Features Ten-Tap® Programming – Choose from three user selectable programs:
                  1.) high/strobe/low (factory default)
                  2.) high only
                  3.) low/high
                • C4® LED illumination output and run times:
                  HIGH - 155 lumens; 3,300 candela peak beam intensity; runs 2 hours
                  LOW - 11 lumens; 200 candela peak beam intensity;  runs 36 hours
                  STROBE – runs 4 hours
                • Solid State power regulation provides maximum light output throughout battery life


                ProTac® EMS
                • C4 LED technology offers 3 levels of increasing intensities: Low, medium and high
                • Powers on at low beam: 3.6 lumens/runs 36 hours; ideal for pupil exams. Faint peripheral illumination surrounding the focused beam slightly illuminates the opposite pupil without directly causing it to contract, facilitating observation of consensual contraction in dim light
                • Two taps of the tail switch accesses medium mode, which delivers 10 lumens/runs for 19 hours. Ideal for non-glare wound examination
                • Three taps of the tail switch accesses high mode, which delivers 50 lumens/runs 1.5 hours (1 AA alkaline); runs 3.4 hours using AA lithium battery


                  Sidewinder®
                  • Available in the following models and light configurations:
                    Military Model – White/Red/IR-IFF/Blue LEDs
                    Aviation Model – White/Green/IR-IFF/Blue LEDs
                    Sportsman Model – White/Red/Green/Blue LEDs
                  • C4® LED technology, white, impervious to shock with 50,000Hr lifetime.
                    5mm IR LED – 880 nm peak wavelength, impervious to shock with 100,000 hour lifetime
                    5mm Red LED – 630 nm peak wavelength, impervious to shock with 100,000 hour lifetime
                    5mm Blue LED – 470 nm peak wavelength, impervious to shock with 100,000 hour lifetime
                    5mm Green LED – 527 nm peak wavelength, impervious to shock with 100,000 hour lifetime
                  • Unbreakable polycarbonate lens with scratch-resistant coating. Gasket-sealed.
                  • Tactile indicator on rotary knob for IR LED position. (Green LED position for Sportsman model.)


                    2AA ProPolymer® HAZ-LO®
                    • C4® LED delivers 65 lumens; 2,300 candela; 96m beam distance; runs 24 hours
                    • Powered by 2 "AA" alkaline batteries (included)
                    • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
                    • Impact-resistant engineering polymer construction


                    2AA ProPolymer® LED
                    • Powered by 2 "AA" alkaline batteries
                    • One (1) 0.5 Watt High-Flux LED, 30,000 hour lifetime in parabolic reflector module.
                    • 20 Lumens typical. Parabolic reflector produces a focused beam with optimum peripheral illumination.


                      2AA ProPolymer® Xenon
                      • Powered by 2 "AA" alkaline batteries
                      • Xenon gas-filled bi-pin bulb
                      • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


                      3AA ProPolymer® HAZ-LO®
                      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                        3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                        • Kit includes:
                          • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                          • Streamlight Helmet Mount
                          • Rubber Helmet Strap


                        4AA ProPolymax®
                        • TEN-TAP® programmable switch allows user selection of one of three different programs:
                          • high/low/strobe (factory default)
                          • high only
                          • low/high 
                        • C4® LED output:
                          • High: 300 lumens; 17,000 candela; runs 2.75 hours
                          • Low: 50 lumens; 2,500 candela; runs 24 hours
                          • Strobe runs 6 hours
                        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


                        4AA ProPolymer® Lux Div 1
                        • C4® LED technology, with a 50,000 hour lifetime.
                        • Unbreakable polycarbonate lens with scratch-resistant coating.
                        • 100 lumens typical; up to 4,200 candela peak beam intensity.


                          4AA ProPolymer® Lux Div 2
                          • C4® LED technology, with a 50,000 hour lifetime.
                          • Unbreakable polycarbonate lens with scratch-resistant coating.
                          • 100 lumens typical; up to 4,200 candela peak beam intensity.


                            4AA ProPolymer® Xenon
                            • Powered by 4 "AA" alkaline batteries
                            • Features a xenon gas-filled module
                            • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                              2AA ProPolymer® LED
                              • ATEX-approved for Category 3 (Zone 2) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum operating temperature of <100°C.
                              • .5w super-bright, high-flux 30,000-hour life LED delivers 20 lumens; 2,300 candela; runs 20 hours
                              • Powered by two "AA" alkaline batteries (included)
                              • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
                              • IP57 rated design; dust and water ingress protected


                              2AA ProPolymer® Xenon
                              • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
                              • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
                              • Powered by two "AA" alkaline batteries (included)
                              • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
                              • IP57 rated design; dust and water ingress protected


                              3AA ProPolymer® HAZ-LO®
                              • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                              • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                              • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                              • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                                3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                                • Kit includes:
                                  • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                                  • Streamlight Helmet Mount
                                  • Rubber Helmet Strap


                                4AA ProPolymer® LED
                                • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                                • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
                                • Powered by four "AA" alkaline batteries (included)
                                • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                                • Push-button tail switch for momentary or constant “on”
                                • Waterproof/Dustproof IP65


                                4AA ProPolymer® LUX
                                • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                                • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
                                • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
                                • Uses four "AA" alkaline batteries (included)
                                • IP67; waterproof to 1 meter for 30 minutes


                                4AA ProPolymer® Xenon
                                • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
                                • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
                                • Powered by four "AA" alkaline batteries
                                • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                                • Push-button tail switch for momentary or constant “on”
                                • Waterproof/Dustproof IP65


                                2AA ProPolymer® HAZ-LO®
                                • C4® LED delivers 65 lumens; 2,300 candela; 96m beam distance; runs 24 hours
                                • Powered by 2 "AA" alkaline batteries (included)
                                • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
                                • Impact-resistant engineering polymer construction


                                2AA ProPolymer® Xenon
                                • Powered by 2 "AA" alkaline batteries
                                • Xenon gas-filled bi-pin bulb
                                • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


                                3AA ProPolymer® HAZ-LO®
                                • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                                • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                                • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                                • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                                  3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                                  • Kit includes:
                                    • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                                    • Streamlight Helmet Mount
                                    • Rubber Helmet Strap


                                  4AA ProPolymer® Lux Div 1
                                  • C4® LED technology, with a 50,000 hour lifetime.
                                  • Unbreakable polycarbonate lens with scratch-resistant coating.
                                  • 100 lumens typical; up to 4,200 candela peak beam intensity.


                                    4AA ProPolymer® Xenon
                                    • Powered by 4 "AA" alkaline batteries
                                    • Features a xenon gas-filled module
                                    • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                                      Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
                                      • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                      • Features a 210 degree articulating head that rotates a full 360 degrees
                                      • 4 lighting modes
                                      • Optimized electronics provide regulated intensity


                                      Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
                                      • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                      • Features a 210 degree articulating head that rotates a full 360 degrees
                                      • 4 lighting modes
                                      • Optimized electronics provide regulated intensity


                                      Survivor® (Alkaline Model)
                                      • Available in rechargeable and alkaline models
                                      • Features C4® LED technology with four lighting modes:
                                        • High for a super-bright beam that pierces through smoke
                                        • Low for bright light and longer run time
                                        • Flash for signaling
                                        • Moonlight mode provides low-level lighting for battery conservation
                                      • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                                      • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


                                      Knucklehead® HAZ-LO® – Flood Model
                                      • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                      • Features a 210 degree articulating head that rotates a full 360 degrees
                                      • 4 lighting modes
                                      • Optimized electronics provide regulated intensity


                                      Knucklehead® HAZ-LO® – Spot Model
                                      • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                      • Features a 210 degree articulating head that rotates a full 360 degrees
                                      • 4 lighting modes
                                      • Optimized electronics provide regulated intensity


                                      Knucklehead®
                                      • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
                                      • Shockproof dual C4® premium LED technology delivers 200 lumens
                                      • Features a 210 degree articulating head that rotates a full 360 degrees
                                      • 4 modes:
                                        High – 1150 candela peak beam intensity, 200 Lumens, 3.5 hour runtime
                                        Low – 350 candela peak beam intensity, 63 lumens, 16 hour runtime
                                        Moonlight – 20 day runtime
                                        Flash – 8 hour runtime


                                        Knucklehead® HAZ-LO® – Flood Model
                                        • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                        • Features a 210 degree articulating head that rotates a full 360 degrees
                                        • 4 lighting modes
                                        • Optimized electronics provide regulated intensity


                                        Knucklehead® HAZ-LO® – Spot Model
                                        • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                        • Features a 210 degree articulating head that rotates a full 360 degrees
                                        • 4 lighting modes
                                        • Optimized electronics provide regulated intensity


                                        Knucklehead® with Clip
                                        • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
                                        • Shockproof dual C4® premium LED technology delivers 200 lumens
                                        • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
                                        • Features a 210 degree articulating head that rotates a full 360 degrees

                                           
                                          ; Cache: True
                                           Page:  Flush: