Product Selector

5 Results Found

Stylus Reach®
  • High-intensity white LED
  • 140 Candela peak beam intensity, 11 lumens
  • Uses three "AAAA" size alkaline batteries (included)
  • Seven-inch extension cable allows for 14" (35.6cm) of reach


Stylus Reach® 18"
  • High-intensity white LED, with a 100,000 hour lifetime.
  • 140 Candela peak beam intensity, 11 lumens typical.
  • 24 continuous hours runtime to the 10% lumen output level.
  • Cable allows for 25.5" of reach.


    Stylus®
    • Body available in Black, Gold, Silver, US Flag, Red or Blue
    • High-intensity 100,000 hour LED available in Artic White, Flame Red (624nm), Ice Blue (470nm), Navigation Green (527nm), Ultraviolet (365nm), or Infrared (880nm).
    • Light Output:
      White: 140 candela peak beam intensity, 24m beam distance and 11 lumens measured system output.
      Blue: 110 candela peak beam intensity, 21m beam distance and 2 lumens measured system output.
      Red: 53 candela peak beam intensity, 15m beam distance and 2 lumens measured system output.
      Green: 59 candela peak beam intensity, 15m beam distance and 7 lumens measured system output.
      UV: 3.8 mW measured system output.
      IR: 12 mW/sr measured system output.
      See model for specific LED selection.


      Stylus Reach®
      • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for long periods. It has a maximum adverse surface temperature of <300°C.
      • Features a 17.78 cm extension cable that allows for 35.6 cm of reach so you can illuminate those hard-to-reach areas
      • High-intensity 100,000 hour white LED delivers 10 lumens; 140 candela peak beam intensity, 24m beam distance; runs 24 hours
      • Uses three "AAAA" alkaline batteries (included)
      • Features a momentary blink switch and constant on
      • Durable anodized aluminum construction; available in black
      • IPX4 water-resistant


      Stylus®
      • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for long periods. It has a maximum adverse surface temperature of <300°C.
      • High-intensity 100,000 hour white LED delivers 11 lumens; 140 candela peak beam intensity, 24m beam distance; runs 24 hours
      • Uses three "AAAA" alkaline batteries (included)
      • Features a momentary blink switch and constant on
      • Durable anodized aluminum construction; available in black
      • IPX4 water-resistant

       
      ; Cache: True
       Page:  Flush: