Product Selector

16 Results Found

2AA ProPolymer® Xenon
  • Powered by 2 "AA" alkaline batteries
  • Xenon gas-filled bi-pin bulb
  • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


3C ProPolymer® LED
  • Powered by 3 "C" alkaline batteries
  • 10 ultra-bright 100,000-hour life LEDs
  • 85 lumens typical with 10 white LEDs, blue LEDs also available


    3C ProPolymer® Xenon
    • Powered by 3 "C" alkaline batteries
    • 785 mA xenon gas-filled module
    • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


      4AA ProPolymer® Lux Div 1
      • C4® LED technology, with a 50,000 hour lifetime.
      • Unbreakable polycarbonate lens with scratch-resistant coating.
      • 100 lumens typical; up to 4,200 candela peak beam intensity.


        4AA ProPolymer® Xenon
        • Powered by 4 "AA" alkaline batteries
        • Features a xenon gas-filled module
        • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


          2AA ProPolymer® Xenon
          • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
          • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
          • Powered by two "AA" alkaline batteries (included)
          • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
          • IP57 rated design; dust and water ingress protected


          3C ProPolymer® LED
          • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
          • 10 ultra-bright white 100,000-hour life LEDs deliver 54 lumens; runs 336 hours
          • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
          • Waterproof/Dustproof IP65


          3C ProPolymer® Xenon
          • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
          • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
          • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
          • Waterproof/Dustproof IP65


          4AA ProPolymer® LED
          • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
          • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
          • Powered by four "AA" alkaline batteries (included)
          • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
          • Push-button tail switch for momentary or constant “on”
          • Waterproof/Dustproof IP65


          4AA ProPolymer® LUX
          • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
          • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
          • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
          • Uses four "AA" alkaline batteries (included)
          • IP67; waterproof to 1 meter for 30 minutes


          4AA ProPolymer® Xenon
          • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
          • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
          • Powered by four "AA" alkaline batteries
          • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
          • Push-button tail switch for momentary or constant “on”
          • Waterproof/Dustproof IP65


          2AA ProPolymer® Xenon
          • Powered by 2 "AA" alkaline batteries
          • Xenon gas-filled bi-pin bulb
          • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


          3C ProPolymer® LED
          • Powered by 3 "C" alkaline batteries
          • 10 ultra-bright 100,000-hour life LEDs
          • 85 lumens typical with 10 white LEDs, blue LEDs also available


            3C ProPolymer® Xenon
            • Powered by 3 "C" alkaline batteries
            • 785 mA xenon gas-filled module
            • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


              4AA ProPolymer® Lux Div 1
              • C4® LED technology, with a 50,000 hour lifetime.
              • Unbreakable polycarbonate lens with scratch-resistant coating.
              • 100 lumens typical; up to 4,200 candela peak beam intensity.


                4AA ProPolymer® Xenon
                • Powered by 4 "AA" alkaline batteries
                • Features a xenon gas-filled module
                • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)

                   
                  ; Cache: True
                   Page:  Flush: