Product Selector

10 Results Found

2AA ProPolymer® Xenon
  • Powered by 2 "AA" alkaline batteries
  • Xenon gas-filled bi-pin bulb
  • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


3C ProPolymer® Lux Div 1
  • Powered by 3 "C" alkaline batteries
  • Up to 3,500 Candela (peak beam intensity), 44 lumens (typical)
  • Runs up to 4 hrs. at full intensity with 16 additional hrs. of declining usable light


    4AA ProPolymer® Lux Div 1
    • C4® LED technology, with a 50,000 hour lifetime.
    • Unbreakable polycarbonate lens with scratch-resistant coating.
    • 100 lumens typical; up to 4,200 candela peak beam intensity.


      4AA ProPolymer® Lux Div 2
      • C4® LED technology, with a 50,000 hour lifetime.
      • Unbreakable polycarbonate lens with scratch-resistant coating.
      • 100 lumens typical; up to 4,200 candela peak beam intensity.


        2AA ProPolymer® Xenon
        • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
        • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
        • Powered by two "AA" alkaline batteries (included)
        • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
        • IP57 rated design; dust and water ingress protected


        4AA ProPolymer® LUX
        • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
        • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
        • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
        • Uses four "AA" alkaline batteries (included)
        • IP67; waterproof to 1 meter for 30 minutes


        2AA ProPolymer® Xenon
        • Powered by 2 "AA" alkaline batteries
        • Xenon gas-filled bi-pin bulb
        • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


        3C ProPolymer® Lux Div 1
        • Powered by 3 "C" alkaline batteries
        • Up to 3,500 Candela (peak beam intensity), 44 lumens (typical)
        • Runs up to 4 hrs. at full intensity with 16 additional hrs. of declining usable light


          4AA ProPolymer® Lux Div 1
          • C4® LED technology, with a 50,000 hour lifetime.
          • Unbreakable polycarbonate lens with scratch-resistant coating.
          • 100 lumens typical; up to 4,200 candela peak beam intensity.


            Trident® Headlamp
            • Winner of Outdoor Life’s prestigious 2013 Editor’s Choice Award
            • Meets lighting needs for both close-up and distance work
            • Features center C4® LED and three ultra-bright white 5mm LEDs
              • C4 LED for super-bright light with useable range: 4,000 candela peak beam intensity; 80 lumens; 126m beam distance; 5 hour run time
              • 3 ultra-bright white 5mm LEDs for bright light and longer run time: 385 candela peak beam intensity; 35 lumens; 39m beam distance; 10 hour run time
              • 1 ultra-bright white 5mm LED for extended run times and when a less intense beam is ideal: 120 candela peak beam intensity; 11 lumens; 22m beam distance; 53 hour run time
            • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation

             
            ; Cache: True
             Page:  Flush: