Product Selector

8 Results Found

Stylus Reach® 18"
  • High-intensity white LED, with a 100,000 hour lifetime.
  • 140 Candela peak beam intensity, 11 lumens typical.
  • 24 continuous hours runtime to the 10% lumen output level.
  • Cable allows for 25.5" of reach.


    Stylus® – UL Model
    • Body available in Black
    • High-intensity 100,000 hour LED available in Artic White
    • Light Output: 140 candela peak beam intensity, 24m beam distance and 11 lumens measured system output.


      2AA ProPolymer® Xenon
      • Powered by 2 "AA" alkaline batteries
      • Xenon gas-filled bi-pin bulb
      • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


      2AA ProPolymer® Xenon
      • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
      • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
      • Powered by two "AA" alkaline batteries (included)
      • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
      • IP57 rated design; dust and water ingress protected


      Stylus Reach®
      • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for long periods. It has a maximum adverse surface temperature of <300°C.
      • Features a 17.78 cm extension cable that allows for 35.6 cm of reach so you can illuminate those hard-to-reach areas
      • High-intensity 100,000 hour white LED delivers 10 lumens; 140 candela peak beam intensity, 24m beam distance; runs 24 hours
      • Uses three "AAAA" alkaline batteries (included)
      • Features a momentary blink switch and constant on
      • Durable anodized aluminum construction; available in black
      • IPX4 water-resistant


      Stylus®
      • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for long periods. It has a maximum adverse surface temperature of <300°C.
      • High-intensity 100,000 hour white LED delivers 11 lumens; 140 candela peak beam intensity, 24m beam distance; runs 24 hours
      • Uses three "AAAA" alkaline batteries (included)
      • Features a momentary blink switch and constant on
      • Durable anodized aluminum construction; available in black
      • IPX4 water-resistant


      2AA ProPolymer® Xenon
      • Powered by 2 "AA" alkaline batteries
      • Xenon gas-filled bi-pin bulb
      • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


      Stylus® – UL Model
      • Body available in Black
      • High-intensity 100,000 hour LED available in Artic White
      • Light Output: 140 candela peak beam intensity, 24m beam distance and 11 lumens measured system output.

         
        ; Cache: True
         Page:  Flush: