Product Selector

33 Results Found

Survivor® (Alkaline Model)
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes:
    • High for a super-bright beam that pierces through smoke
    • Low for bright light and longer run time
    • Flash for signaling
    • Moonlight mode provides low-level lighting for battery conservation
  • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
  • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
  • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
  • Kit includes:
    • 3AA ProPolymer® HAZ-LO® with alkaline batteries
    • Streamlight Helmet Mount
    • Rubber Helmet Strap


2AA ProPolymer® Xenon
  • Powered by 2 "AA" alkaline batteries
  • Xenon gas-filled bi-pin bulb
  • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


3AA ProPolymer® HAZ-LO®
  • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
  • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
  • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
  • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


    3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
    • Kit includes:
      • 3AA ProPolymer® HAZ-LO® with alkaline batteries
      • Streamlight Helmet Mount
      • Rubber Helmet Strap


    4AA ProPolymer® LED
    • Powered by 4 "AA" alkaline batteries
    • 7 ultra-bright 100,000-hour life LEDs
    • 67 lumens typical with 7 white LEDs, blue LEDs also available


      4AA ProPolymer® Lux Div 1
      • C4® LED technology, with a 50,000 hour lifetime.
      • Unbreakable polycarbonate lens with scratch-resistant coating.
      • 100 lumens typical; up to 4,200 candela peak beam intensity.


        4AA ProPolymer® Xenon
        • Powered by 4 "AA" alkaline batteries
        • Features a xenon gas-filled module
        • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


          2AA ProPolymer® Xenon
          • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
          • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
          • Powered by two "AA" alkaline batteries (included)
          • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
          • IP57 rated design; dust and water ingress protected


          3AA HAZ-LO® LED Headlamp
          • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <200°C.
          • RoHS compliant
          • C4® LED delivers 120 lumens; 6,800 candela; 165 meter beam distance, runs 11 hours
          • Parabolic reflector produces long range brilliance and smooth uniform beam pattern
          • Uses three "AA" alkaline batteries (included)
          • Push-button on/off switch easy to use even when wearing heavy gloves


          3AA ProPolymer® HAZ-LO®
          • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
          • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
          • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
          • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


            3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
            • Kit includes:
              • 3AA ProPolymer® HAZ-LO® with alkaline batteries
              • Streamlight Helmet Mount
              • Rubber Helmet Strap


            4AA ProPolymer® LED
            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
            • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
            • Powered by four "AA" alkaline batteries (included)
            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
            • Push-button tail switch for momentary or constant “on”
            • Waterproof/Dustproof IP65


            4AA ProPolymer® LUX
            • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
            • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
            • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
            • Uses four "AA" alkaline batteries (included)
            • IP67; waterproof to 1 meter for 30 minutes


            4AA ProPolymer® Xenon
            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
            • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
            • Powered by four "AA" alkaline batteries
            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
            • Push-button tail switch for momentary or constant “on”
            • Waterproof/Dustproof IP65


            Survivor® LED (Alkaline Model)
            • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp)continually preset. It has a maximum adverse surface temperature of <135°C.
            • Available in rechargeable and alkaline models
            • Features C4® LED technology with four lighting modes
            • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
            • IP54 water-resistant; 2 meter impact resistance tested


            2AA ProPolymer® Xenon
            • Powered by 2 "AA" alkaline batteries
            • Xenon gas-filled bi-pin bulb
            • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


            3AA HAZ-LO® LED Headlamp
            • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
            • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
            • Push-button on/off switch easy to use even when wearing heavy gloves
            • Intrinsically safe – Class I, Div 1


              3AA ProPolymer® HAZ-LO®
              • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
              • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
              • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
              • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                • Kit includes:
                  • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                  • Streamlight Helmet Mount
                  • Rubber Helmet Strap


                4AA ProPolymer® LED
                • Powered by 4 "AA" alkaline batteries
                • 7 ultra-bright 100,000-hour life LEDs
                • 67 lumens typical with 7 white LEDs, blue LEDs also available


                  4AA ProPolymer® Lux Div 1
                  • C4® LED technology, with a 50,000 hour lifetime.
                  • Unbreakable polycarbonate lens with scratch-resistant coating.
                  • 100 lumens typical; up to 4,200 candela peak beam intensity.


                    4AA ProPolymer® Xenon
                    • Powered by 4 "AA" alkaline batteries
                    • Features a xenon gas-filled module
                    • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                      Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
                      • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                      • Features a 210 degree articulating head that rotates a full 360 degrees
                      • 4 lighting modes
                      • Optimized electronics provide regulated intensity


                      Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
                      • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                      • Features a 210 degree articulating head that rotates a full 360 degrees
                      • 4 lighting modes
                      • Optimized electronics provide regulated intensity


                      Survivor® (Alkaline Model)
                      • Available in rechargeable and alkaline models
                      • Features C4® LED technology with four lighting modes:
                        • High for a super-bright beam that pierces through smoke
                        • Low for bright light and longer run time
                        • Flash for signaling
                        • Moonlight mode provides low-level lighting for battery conservation
                      • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                      • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


                      3AA HAZ-LO® LED Headlamp
                      • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
                      • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
                      • Push-button on/off switch easy to use even when wearing heavy gloves
                      • Intrinsically safe – Class I, Div 1


                        Knucklehead® HAZ-LO® – Flood Model
                        • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                        • Features a 210 degree articulating head that rotates a full 360 degrees
                        • 4 lighting modes
                        • Optimized electronics provide regulated intensity


                        Knucklehead® HAZ-LO® – Spot Model
                        • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                        • Features a 210 degree articulating head that rotates a full 360 degrees
                        • 4 lighting modes
                        • Optimized electronics provide regulated intensity


                        Knucklehead® HAZ-LO® – Flood Model
                        • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                        • Features a 210 degree articulating head that rotates a full 360 degrees
                        • 4 lighting modes
                        • Optimized electronics provide regulated intensity


                        Knucklehead® HAZ-LO® – Spot Model
                        • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                        • Features a 210 degree articulating head that rotates a full 360 degrees
                        • 4 lighting modes
                        • Optimized electronics provide regulated intensity

                         
                        ; Cache: True
                         Page:  Flush: