Product Selector

8 Results Found

Buckmasters® Camo Stylus Pro®
  • Proprietary Micro Optical System (MOS), for optimized output and runtime
  • Safety green LED delivers up to 80 candela (peak beam intensity); Up to 5 lumens
  • Runs up to 12 hrs.
  • Available in REALTREE® HARDWOODS Green High Definition® (HD) camouflage


CuffMate®
  • Compatible with most handcuff brands
  • Made of virtually indestructible fiberglass-reinforced polymer
  • Swiveling key ring connector for extra convenience


    The LOGO™
    • Co-branding: Reverse side is imprintable with your corporate identity; Imprint area approx .63” x .38”
    • Perfect for personalization to use as corporate gifts, trade shows, business meetings and more
    • High-intensity white LED with multiple modes:
      - High for brightest light - 10 lumens
      - Medium for bright light and longer run times - 5 lumens
      - Low provides extended run times for when less light is needed - 2.5 lumens
      - Blink to signal your location
    • High, Medium and Low modes run for several hours of intermittent use; Blink mode will flash continuously for 45 hours


    2AA ProPolymer® LED
    • Powered by 2 "AA" alkaline batteries
    • One (1) 0.5 Watt High-Flux LED, 30,000 hour lifetime in parabolic reflector module.
    • 20 Lumens typical. Parabolic reflector produces a focused beam with optimum peripheral illumination.


      2AA ProPolymer® Xenon
      • Powered by 2 "AA" alkaline batteries
      • Xenon gas-filled bi-pin bulb
      • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


      2AA ProPolymer® LED
      • ATEX-approved for Category 3 (Zone 2) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum operating temperature of <100°C.
      • .5w super-bright, high-flux 30,000-hour life LED delivers 20 lumens; 2,300 candela; runs 20 hours
      • Powered by two "AA" alkaline batteries (included)
      • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
      • IP57 rated design; dust and water ingress protected


      2AA ProPolymer® Xenon
      • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
      • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
      • Powered by two "AA" alkaline batteries (included)
      • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
      • IP57 rated design; dust and water ingress protected


      2AA ProPolymer® Xenon
      • Powered by 2 "AA" alkaline batteries
      • Xenon gas-filled bi-pin bulb
      • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)

       
      ; Cache: True
       Page:  Flush: