Product Selector

7 Results Found

ProTac® 1AA
  • Features Ten-Tap® Programming – Choose from three user selectable programs:
    1.) high/strobe/low (factory default)
    2.) high only
    3.) low/high
  • C4® LED illumination output and run times:
    HIGH - 70 lumens; 1,450 candela peak beam intensity; runs 2 hours
    LOW – 5 lumens; 125 candela peak beam intensity;  runs 32 hours
    STROBE – runs 4 hours
  • Solid State power regulation provides maximum light output throughout battery life


ProTac® EMS
  • C4 LED technology offers 3 levels of increasing intensities: Low, medium and high
  • Powers on at low beam: 3.6 lumens/runs 36 hours; ideal for pupil exams. Faint peripheral illumination surrounding the focused beam slightly illuminates the opposite pupil without directly causing it to contract, facilitating observation of consensual contraction in dim light
  • Two taps of the tail switch accesses medium mode, which delivers 10 lumens/runs for 19 hours. Ideal for non-glare wound examination
  • Three taps of the tail switch accesses high mode, which delivers 50 lumens/runs 1.5 hours (1 AA alkaline); runs 3.4 hours using AA lithium battery


    4AA ProPolymer® Lux Div 2
    • C4® LED technology, with a 50,000 hour lifetime.
    • Unbreakable polycarbonate lens with scratch-resistant coating.
    • 100 lumens typical; up to 4,200 candela peak beam intensity.


      4AA ProPolymer® Xenon
      • Powered by 4 "AA" alkaline batteries
      • Features a xenon gas-filled module
      • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


        2AA ProPolymer® LED
        • ATEX-approved for Category 3 (Zone 2) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum operating temperature of <100°C.
        • .5w super-bright, high-flux 30,000-hour life LED delivers 25 lumens; 2,300 candela; runs 18 hours
        • Powered by two "AA" alkaline batteries (included)
        • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
        • IP57 rated design; dust and water ingress protected


        4AA ProPolymer® Xenon
        • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
        • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
        • Powered by four "AA" alkaline batteries
        • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
        • Push-button tail switch for momentary or constant “on”
        • Waterproof/Dustproof IP65


        4AA ProPolymer® Xenon
        • Powered by 4 "AA" alkaline batteries
        • Features a xenon gas-filled module
        • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)

           
          ; Cache: True
           Page:  Flush: