Product Selector

21 Results Found

Survivor® (Alkaline Model)
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes:
    • High for a super-bright beam that pierces through smoke
    • Low for bright light and longer run time
    • Flash for signaling
    • Moonlight mode provides low-level lighting for battery conservation
  • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
  • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
  • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Knucklehead® Spot (Alkaline Model)
  • Shockproof C4® premium LED technology combined with a deep dish parabolic reflector produces a focused beam for longer distances – 210 meters on high beam.
  • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
  • Features a 210 degree articulating head that rotates a full 360 degrees


    Knucklehead® with Clip (Alkaline Model)
    • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
    • Shockproof dual C4® premium LED technology delivers 200 lumens
    • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
    • Features a 210 degree articulating head that rotates a full 360 degrees


      3AA ProPolymer® HAZ-LO®
      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


        4AA ProPolymax®
        • TEN-TAP® programmable switch allows user selection of one of three different programs:
          • high/low/strobe (factory default)
          • high only
          • low/high 
        • C4® LED output:
          • High: 300 lumens; 17,000 candela; runs 2.75 hours
          • Low: 50 lumens; 2,500 candela; runs 24 hours
          • Strobe runs 6 hours
        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


        3AA ProPolymer® HAZ-LO®
        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
        • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
        • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
        • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


          Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
          • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
          • Features a 210 degree articulating head that rotates a full 360 degrees
          • 4 lighting modes
          • Optimized electronics provide regulated intensity


          Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
          • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
          • Features a 210 degree articulating head that rotates a full 360 degrees
          • 4 lighting modes
          • Optimized electronics provide regulated intensity


          Survivor® (Alkaline Model)
          • Available in rechargeable and alkaline models
          • Features C4® LED technology with four lighting modes:
            • High for a super-bright beam that pierces through smoke
            • Low for bright light and longer run time
            • Flash for signaling
            • Moonlight mode provides low-level lighting for battery conservation
          • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
          • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


          2AA ProPolymer® Xenon
          • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
          • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
          • Powered by two "AA" alkaline batteries (included)
          • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
          • IP57 rated design; dust and water ingress protected


          3AA ProPolymer® HAZ-LO®
          • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
          • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
          • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
          • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


            4AA ProPolymer® LUX
            • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
            • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
            • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
            • Uses four "AA" alkaline batteries (included)
            • IP67; waterproof to 1 meter for 30 minutes


            4AA ProPolymer® Xenon
            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
            • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
            • Powered by four "AA" alkaline batteries
            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
            • Push-button tail switch for momentary or constant “on”
            • Waterproof/Dustproof IP65


            Knucklehead® HAZ-LO® – Flood Model
            • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
            • Features a 210 degree articulating head that rotates a full 360 degrees
            • 4 lighting modes
            • Optimized electronics provide regulated intensity


            Knucklehead® HAZ-LO® – Spot Model
            • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
            • Features a 210 degree articulating head that rotates a full 360 degrees
            • 4 lighting modes
            • Optimized electronics provide regulated intensity


            Knucklehead® HAZ-LO® – Flood Model
            • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
            • Features a 210 degree articulating head that rotates a full 360 degrees
            • 4 lighting modes
            • Optimized electronics provide regulated intensity


            Knucklehead® HAZ-LO® – Spot Model
            • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
            • Features a 210 degree articulating head that rotates a full 360 degrees
            • 4 lighting modes
            • Optimized electronics provide regulated intensity


            Knucklehead® Spot
            • Shockproof C4® premium LED technology combined with a deep dish parabolic reflector produces a focused beam for longer distances – 210 meters on high beam.
            • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
            • Features a 210 degree articulating head that rotates a full 360 degrees


              Knucklehead® with Clip
              • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
              • Shockproof dual C4® premium LED technology delivers 200 lumens
              • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
              • Features a 210 degree articulating head that rotates a full 360 degrees

                 
                ; Cache: True
                 Page:  Flush: