Product Selector

22 Results Found

Survivor® (Alkaline Model)
  • Click here for Data Sheet
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes:
    • High for a super-bright beam that pierces through smoke
    • Low for bright light and longer run time
    • Flash for signaling
    • Moonlight mode provides low-level lighting for battery conservation
  • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
  • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


ProTac® Rail Mount 1
  • Click here for Data Sheet
  • Dual fuel - uses one AA alkaline or CR123A lithium battery (both included); also accepts AA lithium
  • Strobe for signaling or disorienting
  • TEN-TAP® Programming - choice of three operating modes: 1.) high/strobe; 2.) high only; 3.) low/high
  • Remote pressure switch features momentary and “constant on” operation
  • Integrated rail clamp attaches to MIL-STD-1913 rails


Nightfighter® X
  • C4® LED technology, with a 50,000 hour lifetime.
  • 3 modes:
    High – 11,000 candela peak beam intensity, 200 Lumens, 2.5 hours runtime
    Low – 550 candela peak beam intensity, 10 Lumens, 50 hours runtime
    Strobe
  • Multi-function, push-button tactical tailswitch. One handed operation of momentary, variable intensity or strobe mode.


    PolyTac® HP
    • C4® LED technology within a deep reflector provides far-reaching targeting beam with a tight spotlight and optimum peripheral illumination
    • TEN-TAP® Programming with choice of three operating modes:
    • Solid State power regulation provides maximum light output throughout battery life
    • Deep reflector produces 275m beam - ideal for lighting the way to the end of a dark alley, down a wooded path, inspecting utility lines from the ground, or search and rescue missions


    Scorpion® X
    • C4® LED with high, low and strobe functions
    • Multi-function, push-button tactical tail switch
    • Durable, anodized aluminum construction with enhanced rubber-armored sleeve; textured for a sure grip with gloved hands and in any environment; O-ring sealed glass lens
    • LED Solid State Power Regulation provides maximum light output throughout battery life.
    • Anti-roll head design prevents the light from rolling away when you set it down


    Super Tac®
    • C4® LED, shock-proof with a 50,000 hr lifetime, is 3X brighter than a super high-flux LED
    • Up to 30,000 candela (peak beam intensity); 160 lumens measured system output.
    • Deep-dish parabolic reflector produces a long range targeting beam with optimum peripheral illumination to aid in navigation. Optimized electronics provide regulated intensity.
    • Runtime: up to 3.5 hours to the 10% output level


    Super Tac® X
    • C4® LED, with a 50,000 hour lifetime.
    • 3 modes:
      High – 40,000 candela peak beam intensity, 200 Lumens, 2.5 hours runtime
      Low – 2000 candela peak beam intensity, 10 Lumens, 50 hours runtime
      Strobe
    • Deep-dish parabolic reflector produces a long range targeting beam with optimum peripheral illumination to aid in navigation. Optimized electronics provide regulated intensity.
    • Multi-function, push-button tactical tailswitch. One handed operation of momentary, variable intensity or strobe mode.


      TL-2® X
      • C4® LED technology, with a 50,000 hour lifetime.
      • 3 modes:
        High – 11,000 candela peak beam intensity, 200 Lumens, 2.5 hours runtime
        Low – 550 candela peak beam intensity, 10 Lumens, 50 hours runtime
        Strobe
      • Multi-function, push-button tactical tailswitch. One handed operation of momentary, variable intensity or strobe mode.


        ProTac® Rail Mount 1
        • Click here for Data Sheet
        • Dual fuel - uses one AA alkaline or CR123A lithium battery (both included); also accepts AA lithium
        • Strobe for signaling or disorienting
        • TEN-TAP® Programming - choice of three operating modes: 1.) high/strobe; 2.) high only; 3.) low/high
        • Remote pressure switch features momentary and “constant on” operation
        • Integrated rail clamp attaches to MIL-STD-1913 rails


        TLR-1®
        • Powered by two 3-volt CR123 lithium batteries with 10-year storage life
        • C4® LED technology, impervious to shock with a 50,000 hour lifetime
        • LED Rating: Up to 12,000 candela peak beam intensity and up to 300 lumens measured system output. Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination
        • Run Time: 2.5 hours regulated run time. Solid-state current regulation for consistent illumination level.


        TLR-1® Game Spotter®
        • Features a shock-proof, green C4® LED that produces a long-range beam that reaches 350 meters
        • Green LED combined with a deep-dish parabolic reflector produces an intense hot-spot that provides long-range identification, preserves night vision and won’t spook varmints
        • 31,000 candela peak beam intensity; 150 lumens; Runs 1.75 hours
        • Mounts directly to all MIL-STD-1913 (Picatinny) rails and weapons with Glock-style rails


        TLR-1®s
        • Powered by two 3-volt CR123A lithium batteries with 10-year storage life
        • C4® LED technology, impervious to shock with a 50,000 hour lifetime
        • LED Rating: Up to 12,000 candela peak beam intensity and up to 300 lumens measured system output. Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination
        • Run Time: 2.5 hours regulated run time. Solid-state current regulation for consistent illumination level.


        TLR-2®
        • Powered by two 3-volt CR123 lithium batteries with 10-year storage life
        • C4® LED Technology, impervious to shock with a 50,000 hour lifetime.
        • Up to 12,000 candela peak beam intensity and up to 300 lumens measured system output.
        • Up to 2.5 hrs runtime; LASER ONLY runs 48 hours.


        TLR-2® G
        • Features C4® LED and a highly visible 510-530nm direct drive green laser with wide operating temperature range
        • C4 LED delivers 12,000 candela peak beam intensity; 300 lumens
        • Textured parabolic reflector produces a concentrated beam with optimum peripheral illumination; green laser provides long-range targeting


        TLR-2®s
        • Powered by two 3-volt CR123A lithium batteries with 10-year storage life
        • C4® LED with blinding beam (up to 12,000 candela peak beam intensity and up to 300 lumens measured system output) with optimum peripheral illumination – will not break or burn out!
        • Strobe model with user programmable strobe enable/disable
        • Up to 2.5 hr. Run Time


        TLR-VIR®
        • Illumination sources:
          • Visible C4® LED, impervious to shock with a 50,000 hour lifetime
            • 12,000 candela peak beam intensity; 300 lumens; runs 2.5 hours
            • Deep dish parabolic reflector produces a concentrated beam with optimum peripheral illumination
          • Infrared illuminator - 850 nm LED. Shock-proof with a 20,000 hour lifetime
            • 1000mW/sr (min) radiant intensity providing optimum illumination when using night vision equipment; runs 20 hours
        • Solid-state current regulation for consistent illumination level
        • 6000 series anodized machined aircraft aluminum body with high impact, chemically resistant engineering polymer IR LED housing


        3AA ProPolymer® HAZ-LO®
        • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations
        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
        • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
        • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
        • Combination of visual and mechanical polarity protection ensures correct installation of batteries
        • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


        4AA ProPolymax®
        • TEN-TAP® programmable switch allows user selection of one of three different programs:
          • high/low/strobe (factory default)
          • high only
          • low/high 
        • C4® LED output:
          • High: 300 lumens; 17,000 candela; runs 2.75 hours
          • Low: 50 lumens; 2,500 candela; runs 24 hours
          • Strobe runs 6 hours
        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


        3AA ProPolymer® HAZ-LO®
        • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations
        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
        • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
        • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
        • Combination of visual and mechanical polarity protection ensures correct installation of batteries
        • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


        Survivor® (Alkaline Model)
        • Click here for Data Sheet
        • Available in rechargeable and alkaline models
        • Features C4® LED technology with four lighting modes:
          • High for a super-bright beam that pierces through smoke
          • Low for bright light and longer run time
          • Flash for signaling
          • Moonlight mode provides low-level lighting for battery conservation
        • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
        • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


        3AA ProPolymer® HAZ-LO®
        • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations
        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
        • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
        • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
        • Combination of visual and mechanical polarity protection ensures correct installation of batteries
        • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


        PolyTac® HP
        • C4® LED technology within a deep reflector provides far-reaching targeting beam with a tight spotlight and optimum peripheral illumination
        • TEN-TAP® Programming with choice of three operating modes:
        • Solid State power regulation provides maximum light output throughout battery life
        • Deep reflector produces 275m beam - ideal for lighting the way to the end of a dark alley, down a wooded path, inspecting utility lines from the ground, or search and rescue missions

         
        ; Cache: True
         Page:  Flush: