Product Selector

22 Results Found

Stylus Reach® – UL Model
  • High-intensity white LED
  • 140 Candela peak beam intensity, 11 lumens
  • Uses three "AAAA" size alkaline batteries (included)
  • Seven-inch extension cable allows for 14" (35.6cm) of reach
  • Intrinsically safe.


2AA ProPolymer® LED
  • Powered by 2 "AA" alkaline batteries
  • One (1) 0.5 Watt High-Flux LED, 30,000 hour lifetime in parabolic reflector module.
  • 20 Lumens typical. Parabolic reflector produces a focused beam with optimum peripheral illumination.


    2AA ProPolymer® Xenon
    • Powered by 2 "AA" alkaline batteries
    • Xenon gas-filled bi-pin bulb
    • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


    3C ProPolymer® LED
    • Powered by 3 "C" alkaline batteries
    • 10 ultra-bright 100,000-hour life LEDs
    • 85 lumens typical with 10 white LEDs, blue LEDs also available


      3C ProPolymer® Xenon
      • Powered by 3 "C" alkaline batteries
      • 785 mA xenon gas-filled module
      • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


        3N ProPolymer® LED
        • Powered by 3 "N" alkaline batteries
        • 3 ultra-bright 100,000-hour life LEDs
        • LEDs provide up to 30 lumens, blue LEDs also available


          4AA ProPolymax®
          • TEN-TAP® programmable switch allows user selection of one of three different programs:
            • high/low/strobe (factory default)
            • high only
            • low/high 
          • C4® LED output:
            • High: 300 lumens; 17,000 candela; runs 2.75 hours
            • Low: 50 lumens; 2,500 candela; runs 24 hours
            • Strobe runs 6 hours
          • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


          4AA ProPolymer® Lux Div 2
          • C4® LED technology, with a 50,000 hour lifetime.
          • Unbreakable polycarbonate lens with scratch-resistant coating.
          • 100 lumens typical; up to 4,200 candela peak beam intensity.


            4AA ProPolymer® Xenon
            • Powered by 4 "AA" alkaline batteries
            • Features a xenon gas-filled module
            • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


              2AA ProPolymer® LED
              • ATEX-approved for Category 3 (Zone 2) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum operating temperature of <100°C.
              • .5w super-bright, high-flux 30,000-hour life LED delivers 20 lumens; 2,300 candela; runs 20 hours
              • Powered by two "AA" alkaline batteries (included)
              • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
              • IP57 rated design; dust and water ingress protected


              2AA ProPolymer® Xenon
              • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
              • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
              • Powered by two "AA" alkaline batteries (included)
              • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
              • IP57 rated design; dust and water ingress protected


              3C ProPolymer® LED
              • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
              • 10 ultra-bright white 100,000-hour life LEDs deliver 54 lumens; runs 336 hours
              • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
              • Waterproof/Dustproof IP65


              3C ProPolymer® Xenon
              • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
              • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
              • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
              • Waterproof/Dustproof IP65


              4AA ProPolymer® LED
              • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
              • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
              • Powered by four "AA" alkaline batteries (included)
              • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
              • Push-button tail switch for momentary or constant “on”
              • Waterproof/Dustproof IP65


              4AA ProPolymer® LUX
              • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
              • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
              • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
              • Uses four "AA" alkaline batteries (included)
              • IP67; waterproof to 1 meter for 30 minutes


              4AA ProPolymer® Xenon
              • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
              • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
              • Powered by four "AA" alkaline batteries
              • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
              • Push-button tail switch for momentary or constant “on”
              • Waterproof/Dustproof IP65


              2AA ProPolymer® Xenon
              • Powered by 2 "AA" alkaline batteries
              • Xenon gas-filled bi-pin bulb
              • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


              3C ProPolymer® LED
              • Powered by 3 "C" alkaline batteries
              • 10 ultra-bright 100,000-hour life LEDs
              • 85 lumens typical with 10 white LEDs, blue LEDs also available


                3C ProPolymer® Xenon
                • Powered by 3 "C" alkaline batteries
                • 785 mA xenon gas-filled module
                • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


                  3N ProPolymer® LED
                  • Powered by 3 "N" alkaline batteries
                  • 3 ultra-bright 100,000-hour life LEDs
                  • LEDs provide up to 30 lumens, blue LEDs also available


                    4AA ProPolymer® Xenon
                    • Powered by 4 "AA" alkaline batteries
                    • Features a xenon gas-filled module
                    • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                      Stylus Reach® – UL Model
                      • High-intensity white LED
                      • 140 Candela peak beam intensity, 11 lumens
                      • Uses three "AAAA" size alkaline batteries (included)
                      • Seven-inch extension cable allows for 14" (35.6cm) of reach
                      • Intrinsically safe.

                       
                      ; Cache: True
                       Page:  Flush: