Product Selector

15 Results Found

Survivor® LED
  • ATEX-approved for Category 2 (Zone 1) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes
  • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications.
  • Industrial rechargeable NiCd battery can be recharged up to 1,000 times. Also accepts four "AA" alkaline non-rechargeable batteries for fast replacement with readily available batterie
  • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
  • IP54 water-resistant; 2 meter impact resistance tested


Knucklehead® HAZ-LO® – Spot Model
  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Polystinger® LED HAZ-LO®
  • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
  • 3 modes:
    High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
    Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
    Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
  • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


    Knucklehead® HAZ-LO® – Spot Model
    • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 lighting modes
    • Optimized electronics provide regulated intensity

    SL


    SL-20X®
    • 10 watt halogen lamp with tungsten filament
    • Up to 38,000 pre-focused Candela (peak beam intensity); 180 lumens
    • Machined aircraft aluminum with anodized finish


      SL-20X® LED
      • 10 watt halogen bulb with a 100-hour lifetime
      • Up to 38,000 Candela (peak beam intensity), 200 lumens (typical) from halogen bulb
      • 3 white LEDs with 100,000-hour lifetime provide up to 30 lumens


        SL-20XP®
        • 8 watt halogen bulb with a 100-hour lifetime
        • Pre-focused halogen beam of up to 25,000 Candela (peak beam intensity); 145 lumens
        • Lightweight, super-tough nylon polymer case with non-slip rubber comfort grip


          SL-20XP® LED Power Failure
          • 8 watt halogen bulb with a 100-hour lifetime
          • Pre-focused halogen beam of up to 16,000 Candela (peak beam intensity)
          • 3 white LEDs with 100,000-hour lifetime provide up to 20 lumens; bulb rating is 120 lumens


            PolyStinger DS® LED
            • DUAL SWITCH TECHNOLOGY – Access three lighting modes and strobe via the tail cap or the head-mounted switch. Switches operate independently
            • Three modes and strobe:
              • High for a bright super-bright beam: 26,000 candela peak beam intensity; 385 lumens; runs 2 hours
              • Medium for bright light and longer run times: 13,000 candela peak beam intensity; 195 lumens; runs 3.75 hours
              • Low for when a less intense beam is needed and for extended run times: 6,500 candela peak beam intensity; 95 lumens; runs 7.25 hours
              • Strobe for disorienting or signaling your location; runs 5.5 hours
            • Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination; optimized electronics provides regulated intensity


            PolyStinger® LED
            • Multi-function On/Off push-button switch lets you choose three lighting modes and strobe; designed for extremely long life; tested at 1 million actuations
            • Three modes and strobe:
              • High for a bright super-bright beam: 26,000 candela peak beam intensity; 385 lumens; runs 2 hours
              • Medium for bright light and longer run times: 13,000 candela peak beam intensity; 195 lumens; runs 3.75 hours
              • Low for when a less intense beam is needed and for extended run times: 6,500 candela peak beam intensity; 95 lumens; runs 7.25 hours
              • Strobe for disorienting or signaling your location; runs 5.5 hours
            • Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination; optimized electronics provides regulated intensity


            Polystinger® LED HAZ-LO®
            • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
            • 3 modes:
              High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
              Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
              Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
            • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


              Stinger DS® LED
              • DUAL SWITCH TECHNOLOGY – Access three lighting modes and strobe via the tail cap or the head-mounted switch. Switches operate independently
              • Three modes and strobe:
                - High for a bright super-bright beam - 350 lumens; 24,000 candela peak beam intensity; 310 meter beam distance; runs 2 hours
                - Medium for bright light and longer run times – 175 lumens; 12,000 candela peak beam intensity; 219 meter beam distance; runs 3.75 hours
                - Low for light without glare and extended run times – 85 lumens; 6,000 candela peak beam intensity; 155 meter beam distance; runs 7.25 hours
                - Strobe for disorienting or signaling your location; runs 5.5 hours
              • Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination


                Stinger® LED
                • Multi-function On/Off push-button switch lets you choose three lighting modes and strobe; designed for extremely long life; tested at 1 million actuations
                • Three modes and strobe:
                  - High for a bright super-bright beam - 350 lumens; 24,000 candela peak beam intensity; 310 meter beam distance; runs 2 hours
                  - Medium for bright light and longer run times – 175 lumens; 12,000 candela peak beam intensity; 219 meter beam distance; runs 3.75 hours
                  - Low for light without glare and extended run times – 85 lumens; 6,000 candela peak beam intensity; 155 meter beam distance; runs 7.25 hours
                  - Strobe for disorienting or signaling your location; runs 5.5 hours
                • Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination


                  Stinger® LED HP
                  • Multi-function push-button switch lets you choose three lighting modes and strobe
                  • Three modes and strobe:
                    - High for a far-reaching beam - 350 lumens; 56,000 candela peak beam intensity; 473 meter beam distance; runs 2 hours
                    - Medium for bright light and longer run times – 175 lumens; 28,000 candela peak beam intensity; 335 meter beam distance; runs 3.75 hours
                    - Low for light without glare and extended run times – 85 lumens; 14,000 candela peak beam intensity; 237 meter beam distance; runs 7.25 hours
                    - Strobe for disorienting or signaling your location; runs 5.5 hours
                  • Deep-dish parabolic reflector produces a long-range targeting beam with optimum peripheral illumination


                    Strion® LED HP
                    • Multi-function, push-button tactical tail switch lets you select three lighting modes and strobe
                    • Three modes and strobe:
                      - High for a far-reaching beam - 275 lumens; 40,000 candela peak beam intensity; 400 meter beam distance; runs 2 hours
                      - Medium for bright light and longer run times – 138 lumens; 20,000 candela peak beam intensity; 283 meter beam distance; runs 4 hours
                      - Low for light without glare and extended run times – 70 lumens; 10,000 candela peak beam intensity; 200 meter beam distance; runs 7.5 hours
                      - Strobe for disorienting or signaling your location; runs 5.5 hours

                    • Deep-dish parabolic reflector provides a long-range targeting beam with optimum peripheral illumination
                    • C4® LED technology, impervious to shock with a 50,000 hour lifetime

                     
                    ; Cache: True
                     Page:  Flush: