Product Selector

12 Results Found

Survivor® LED (Alkaline Model)
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes
  • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications. Optimum peripheral illumination to aid in navigation
  • Spring loaded clip with built-in ring easily attaches to belts and harnesses.


4AA ProPolymax®
  • TEN-TAP® programmable switch allows user selection of one of three different programs:
    • high/low/strobe (factory default)
    • high only
    • low/high 
  • C4® LED output:
    • High: 300 lumens; 17,000 candela; runs 2.75 hours
    • Low: 50 lumens; 2,500 candela; runs 24 hours
    • Strobe runs 6 hours
  • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


2AA ProPolymer® LED
  • ATEX-approved for Category 3 (Zone 2) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum operating temperature of <100°C.
  • .5w super-bright, high-flux 30,000-hour life LED delivers 25 lumens; 2,300 candela; runs 18 hours
  • Powered by two "AA" alkaline batteries (included)
  • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
  • IP57 rated design; dust and water ingress protected


2AA ProPolymer® Xenon
  • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
  • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
  • Powered by two "AA" alkaline batteries (included)
  • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
  • IP57 rated design; dust and water ingress protected


3C ProPolymer® LED
  • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
  • 10 ultra-bright white 100,000-hour life LEDs deliver 54 lumens; runs 336 hours
  • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
  • Waterproof/Dustproof IP65


3C ProPolymer® Xenon
  • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
  • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
  • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
  • Waterproof/Dustproof IP65


4AA ProPolymer® LUX
  • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
  • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
  • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
  • Uses four "AA" alkaline batteries (included)
  • IP67; waterproof to 1 meter for 30 minutes


4AA ProPolymer® Xenon
  • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
  • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
  • Powered by four "AA" alkaline batteries
  • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
  • Push-button tail switch for momentary or constant “on”
  • Waterproof/Dustproof IP65


Survivor® LED (Alkaline Model)
  • ATEX-approved for Category 2 (Zone 1) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes
  • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
  • IP54 water-resistant; 2 meter impact resistance tested


Survivor® LED (Alkaline Model)
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes
  • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications. Optimum peripheral illumination to aid in navigation
  • Spring loaded clip with built-in ring easily attaches to belts and harnesses.


Survivor® LED
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes
  • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications. Optimum peripheral illumination to aid in navigation
  • Spring loaded clip with built-in ring easily attaches to belts and harnesses.


Survivor® LED
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes
  • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications. Optimum peripheral illumination to aid in navigation
  • Spring loaded clip with built-in ring easily attaches to belts and harnesses.

 
; Cache: True
 Page:  Flush: