Product Selector

24 Results Found

Survivor® LED
  • ATEX-approved for Category 2 (Zone 1) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes
  • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications.
  • Industrial rechargeable NiCd battery can be recharged up to 1,000 times. Also accepts four "AA" alkaline non-rechargeable batteries for fast replacement with readily available batterie
  • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
  • IP54 water-resistant; 2 meter impact resistance tested


Knucklehead® HAZ-LO® – Flood Model
  • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Knucklehead® HAZ-LO® – Spot Model
  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Polystinger® LED HAZ-LO®
  • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
  • 3 modes:
    High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
    Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
    Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
  • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


    Survivor®
    • Available in rechargeable and alkaline models
    • Features C4® LED technology with four lighting modes:
      • High for a super-bright beam that pierces through smoke
      • Low for bright light and longer run time
      • Flash for signaling
      • Moonlight mode provides low-level lighting for battery conservation
    • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
    • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


    Knucklehead®
    • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
    • Shockproof dual C4® premium LED technology delivers 200 lumens
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 modes:
      High – 1150 candela peak beam intensity, 200 Lumens, 3.5 hour runtime
      Low – 350 candela peak beam intensity, 63 lumens, 16 hour runtime
      Moonlight – 20 day runtime
      Flash – 8 hour runtime


      Knucklehead® HAZ-LO® – Flood Model
      • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      Knucklehead® HAZ-LO® – Spot Model
      • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      Knucklehead® Spot
      • Shockproof C4® premium LED technology combined with a deep dish parabolic reflector produces a focused beam for longer distances – 210 meters on high beam.
      • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
      • Features a 210 degree articulating head that rotates a full 360 degrees


        Knucklehead® with Clip
        • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
        • Shockproof dual C4® premium LED technology delivers 200 lumens
        • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
        • Features a 210 degree articulating head that rotates a full 360 degrees

          SL


          SL-20L®
          • Deep-dish parabolic reflector produces a tight beam with optimum peripheral illumination
          • C4® LED technology, with a 50,000 hour lifetime
          • Select high, medium, low or strobe modes with multi-function, push-button switch


            SL-20LP®
            • Deep-dish parabolic reflector produces a tight beam with optimum peripheral illumination
            • C4® LED technology, with a 50,000 hour lifetime
            • Select high, medium, low or strobe modes with multi-function, push-button switch


              SL-20X®
              • 10 watt halogen lamp with tungsten filament
              • Up to 38,000 pre-focused Candela (peak beam intensity); 180 lumens
              • Machined aircraft aluminum with anodized finish


                SL-20X® LED
                • 10 watt halogen bulb with a 100-hour lifetime
                • Up to 38,000 Candela (peak beam intensity), 200 lumens (typical) from halogen bulb
                • 3 white LEDs with 100,000-hour lifetime provide up to 30 lumens


                  SL-20XP®
                  • 8 watt halogen bulb with a 100-hour lifetime
                  • Pre-focused halogen beam of up to 25,000 Candela (peak beam intensity); 145 lumens
                  • Lightweight, super-tough nylon polymer case with non-slip rubber comfort grip


                    SL-20XP® LED Power Failure
                    • 8 watt halogen bulb with a 100-hour lifetime
                    • Pre-focused halogen beam of up to 16,000 Candela (peak beam intensity)
                    • 3 white LEDs with 100,000-hour lifetime provide up to 20 lumens; bulb rating is 120 lumens


                      PolyStinger DS® LED
                      • DUAL SWITCH TECHNOLOGY – Access three lighting modes and strobe via the tail cap or the head-mounted switch. Switches operate independently
                      • Three modes and strobe:
                        • High for a bright super-bright beam: 26,000 candela peak beam intensity; 385 lumens; runs 2 hours
                        • Medium for bright light and longer run times: 13,000 candela peak beam intensity; 195 lumens; runs 3.75 hours
                        • Low for when a less intense beam is needed and for extended run times: 6,500 candela peak beam intensity; 95 lumens; runs 7.25 hours
                        • Strobe for disorienting or signaling your location; runs 5.5 hours
                      • Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination; optimized electronics provides regulated intensity


                      PolyStinger® LED
                      • Multi-function On/Off push-button switch lets you choose three lighting modes and strobe; designed for extremely long life; tested at 1 million actuations
                      • Three modes and strobe:
                        • High for a bright super-bright beam: 26,000 candela peak beam intensity; 385 lumens; runs 2 hours
                        • Medium for bright light and longer run times: 13,000 candela peak beam intensity; 195 lumens; runs 3.75 hours
                        • Low for when a less intense beam is needed and for extended run times: 6,500 candela peak beam intensity; 95 lumens; runs 7.25 hours
                        • Strobe for disorienting or signaling your location; runs 5.5 hours
                      • Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination; optimized electronics provides regulated intensity


                      Polystinger® LED HAZ-LO®
                      • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
                      • 3 modes:
                        High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
                        Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
                        Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
                      • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


                        Stinger DS® LED
                        • DUAL SWITCH TECHNOLOGY – Access three lighting modes and strobe via the tail cap or the head-mounted switch. Switches operate independently
                        • Three modes and strobe:
                          - High for a bright super-bright beam - 350 lumens; 24,000 candela peak beam intensity; 310 meter beam distance; runs 2 hours
                          - Medium for bright light and longer run times – 175 lumens; 12,000 candela peak beam intensity; 219 meter beam distance; runs 3.75 hours
                          - Low for light without glare and extended run times – 85 lumens; 6,000 candela peak beam intensity; 155 meter beam distance; runs 7.25 hours
                          - Strobe for disorienting or signaling your location; runs 5.5 hours
                        • Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination


                          Stinger® LED
                          • Multi-function On/Off push-button switch lets you choose three lighting modes and strobe; designed for extremely long life; tested at 1 million actuations
                          • Three modes and strobe:
                            - High for a bright super-bright beam - 350 lumens; 24,000 candela peak beam intensity; 310 meter beam distance; runs 2 hours
                            - Medium for bright light and longer run times – 175 lumens; 12,000 candela peak beam intensity; 219 meter beam distance; runs 3.75 hours
                            - Low for light without glare and extended run times – 85 lumens; 6,000 candela peak beam intensity; 155 meter beam distance; runs 7.25 hours
                            - Strobe for disorienting or signaling your location; runs 5.5 hours
                          • Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination


                            Stinger® Lite Pipe
                            • Work light system features 8 high-power LEDs that produce a soft, 220 lumen flood pattern to illuminate your entire work area for 3.25 hours
                            • Available in a complete system, or if you already have a xenon Stinger, optional Lite Pipe Kit allows you to convert it to a Stinger Lite Pipe
                            • Ultra-thin design fits into tight spaces
                            • Removable, rotatable hang-hook allows you to use it as a drop light


                              UltraStinger®
                              • 30-hour life xenon-halogen gas-filled bi-pin bulb
                              • Adjustable focus beam
                              • Up to 35,000 candela (peak beam intensity); 230 lumens


                                Survivor®
                                • Available in rechargeable and alkaline models
                                • Features C4® LED technology with four lighting modes:
                                  • High for a super-bright beam that pierces through smoke
                                  • Low for bright light and longer run time
                                  • Flash for signaling
                                  • Moonlight mode provides low-level lighting for battery conservation
                                • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                                • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation

                                 
                                ; Cache: True
                                 Page:  Flush: