Product Selector

12 Results Found

Twin-Task® 3AAA LASER LED
  • Pre-focused visible red Laser cartridge. C4® LED technology, with a 50,000 hour lifetime. Five ultra-bright white LEDs with 100,000 hour lifetime.
  • 2 modes:
    C4 LED – 2000 candela peak beam intensity, 100 Lumens, 2.75 hours runtime
    5 LED – 800 candela peak beam intensity, 68 Lumens, 5.25 hours runtime
  • Push-button sequences through four positions — Laser only, C4® LED, Laser/C4® LED combo, or five ultra-bright white LEDs.


    Streamlight Jr.® LED
    • Click here for Data Sheet
    • C4® LED delivers 140 lumens; 2,300 candela; 96m beam distance; runs 5 hours (alkaline); runs 10 hours (L91 lithium)
    • Textured parabolic reflector produces an even, wide beam hotspot
    • Powered by two "AA" alkaline batteries (included) or two "AA" lithium batteries
    • Push button tail switch - momentary or constant on operation


    Stylus Pro Reach®
    • White C4® LED technology, impervious to shock
    • 825 candela peak beam intensity, 38 lumens
    • Uses two easily-sourced AAA alkaline batteries (included)
    • Eight-inch (20.32 cm) flexible polyethylene-coated extension cable allows for 14" (35.56 cm) of reach


    Stylus Pro®
    • Click here for Data Sheet
    • White C4® LED delivers 90 lumens; 860 candela; 58m beam; runs 6.5 hours
    • Push button tail switch – momentary or constant on operation
    • Includes two "AAA" alkaline batteries and tear-resistant nylon holster
    • Type II MIL-SPEC abrasion and corrosion-resistant anodized aircraft aluminum construction with unbreakable, scratch-resistant polycarbonate lens


    Stylus Pro® 360
    • Click here for Data Sheet
    • C4® LED produces 65 lumens; 430 candela; 41m beam; runs 6.5 hours
    • Bezel slides forward to reveal a polycarbonate globe that provides 360° of light
    • Uses 2 AAA alkaline batteries (included)
    • Bell-shaped rubber sleeve over push-button switch provides stability so the light can stand upright


    Vantage®
    • Click here for Data Sheet
    • Lightweight, compact, low profile design easily attaches/detaches above or below brim on fire helmets, industrial helmets and hard hats
    • C4® LED delivers 7,000 candela peak beam intensity; 115 lumens; 167 meter beam distance; runs 6 hours
    • Features an ultra-bright blue taillight LED (green model features an ultra-bright green taillight LED)
    • Fits both traditional and modern style helmets


    TLR-2® G
    • Features C4® LED and a highly visible 510-530nm direct drive green laser with wide operating temperature range
    • C4 LED delivers 12,000 candela peak beam intensity; 300 lumens
    • Textured parabolic reflector produces a concentrated beam with optimum peripheral illumination; green laser provides long-range targeting


    3AA ProPolymer® HAZ-LO®
    • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations
    • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
    • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
    • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
    • Combination of visual and mechanical polarity protection ensures correct installation of batteries
    • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


    4AA ProPolymer® Lux Div 1
    • C4® LED technology, with a 50,000 hour lifetime.
    • Unbreakable polycarbonate lens with scratch-resistant coating.
    • 100 lumens typical; up to 4,200 candela peak beam intensity.


      3AA ProPolymer® HAZ-LO®
      • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations
      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
      • Combination of visual and mechanical polarity protection ensures correct installation of batteries
      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


      4AA ProPolymer® Lux Div 1
      • C4® LED technology, with a 50,000 hour lifetime.
      • Unbreakable polycarbonate lens with scratch-resistant coating.
      • 100 lumens typical; up to 4,200 candela peak beam intensity.


        3AA ProPolymer® HAZ-LO®
        • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations
        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
        • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
        • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
        • Combination of visual and mechanical polarity protection ensures correct installation of batteries
        • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours

         
        ; Cache: True
         Page:  Flush: