Product Selector

9 Results Found

Streamlight Jr.® LED
  • 1 watt C4® LED, 50,000-hr. LED
  • Up to 3800 candela (peak beam intensity) and 85 lumens measured system output
  • Runtime to the 10% output level:
    "AA" Alkaline Batteries – 4 Hours
    "AA" (L91) Lithium Batteries – 5.25 Hours


    ProTac® 2AA
    • Features Ten-Tap® Programming – Choose from three user selectable programs:
      1.) high/strobe/low (factory default)
      2.) high only
      3.) low/high
    • C4® LED illumination output and run times:
      HIGH - 155 lumens; 3,300 candela peak beam intensity; runs 2 hours
      LOW - 11 lumens; 200 candela peak beam intensity;  runs 36 hours
      STROBE – runs 4 hours
    • Solid State power regulation provides maximum light output throughout battery life


    2AA ProPolymer® Xenon
    • Powered by 2 "AA" alkaline batteries
    • Xenon gas-filled bi-pin bulb
    • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


    4AA ProPolymer® Lux Div 1
    • C4® LED technology, with a 50,000 hour lifetime.
    • Unbreakable polycarbonate lens with scratch-resistant coating.
    • 100 lumens typical; up to 4,200 candela peak beam intensity.


      4AA ProPolymer® Lux Div 2
      • C4® LED technology, with a 50,000 hour lifetime.
      • Unbreakable polycarbonate lens with scratch-resistant coating.
      • 100 lumens typical; up to 4,200 candela peak beam intensity.


        2AA ProPolymer® Xenon
        • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
        • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
        • Powered by two "AA" alkaline batteries (included)
        • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
        • IP57 rated design; dust and water ingress protected


        4AA ProPolymer® LUX
        • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
        • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
        • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
        • Uses four "AA" alkaline batteries (included)
        • IP67; waterproof to 1 meter for 30 minutes


        2AA ProPolymer® Xenon
        • Powered by 2 "AA" alkaline batteries
        • Xenon gas-filled bi-pin bulb
        • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


        4AA ProPolymer® Lux Div 1
        • C4® LED technology, with a 50,000 hour lifetime.
        • Unbreakable polycarbonate lens with scratch-resistant coating.
        • 100 lumens typical; up to 4,200 candela peak beam intensity.

           
          ; Cache: True
           Page:  Flush: