Product Selector

12 Results Found

Survivor® LED (Alkaline Model)
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes
  • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications. Optimum peripheral illumination to aid in navigation
  • Spring loaded clip with built-in ring easily attaches to belts and harnesses.


4AA ProPolymax®
  • TEN-TAP® programmable switch allows user selection of one of three different programs:
    • high/low/strobe (factory default)
    • high only
    • low/high 
  • C4® LED output:
    • High: 300 lumens; 17,000 candela; runs 2.75 hours
    • Low: 50 lumens; 2,500 candela; runs 24 hours
    • Strobe runs 6 hours
  • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


4AA ProPolymer® LED
  • Powered by 4 "AA" alkaline batteries
  • 7 ultra-bright 100,000-hour life LEDs
  • 67 lumens typical with 7 white LEDs, blue LEDs also available


    4AA ProPolymer® Lux Div 2
    • C4® LED technology, with a 50,000 hour lifetime.
    • Unbreakable polycarbonate lens with scratch-resistant coating.
    • 100 lumens typical; up to 4,200 candela peak beam intensity.


      4AA ProPolymer® Xenon
      • Powered by 4 "AA" alkaline batteries
      • Features a xenon gas-filled module
      • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


        4AA ProPolymer® LED
        • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
        • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
        • Powered by four "AA" alkaline batteries (included)
        • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
        • Push-button tail switch for momentary or constant “on”
        • Waterproof/Dustproof IP65


        4AA ProPolymer® LUX
        • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
        • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
        • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
        • Uses four "AA" alkaline batteries (included)
        • IP67; waterproof to 1 meter for 30 minutes


        4AA ProPolymer® Xenon
        • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
        • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
        • Powered by four "AA" alkaline batteries
        • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
        • Push-button tail switch for momentary or constant “on”
        • Waterproof/Dustproof IP65


        Survivor® LED (Alkaline Model)
        • ATEX-approved for Category 2 (Zone 1) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
        • Available in rechargeable and alkaline models
        • Features C4® LED technology with four lighting modes
        • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
        • IP54 water-resistant; 2 meter impact resistance tested


        4AA ProPolymer® LED
        • Powered by 4 "AA" alkaline batteries
        • 7 ultra-bright 100,000-hour life LEDs
        • 67 lumens typical with 7 white LEDs, blue LEDs also available


          4AA ProPolymer® Xenon
          • Powered by 4 "AA" alkaline batteries
          • Features a xenon gas-filled module
          • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


            Survivor® LED (Alkaline Model)
            • Available in rechargeable and alkaline models
            • Features C4® LED technology with four lighting modes
            • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications. Optimum peripheral illumination to aid in navigation
            • Spring loaded clip with built-in ring easily attaches to belts and harnesses.

             
            ; Cache: True
             Page:  Flush: