Product Selector

21 Results Found

Multi Ops®
  • Shock-proof C4® LED design – 2-3x Brighter than a High Flux LED!
  • Light Output and Runtime:
    C4® LED – Impervious to shock with a 50,000 hour lifetime; 2500 candela peak beam intensity; 50 lumens; 4.75 continuous hours to 10% of initial lumen output.
    Five (5) 390nm UV LEDs – 40mw measured system output; 10 continuous hours to 10% of initial output power.
    Visible Red Laser – 650nm, Class IIIa (3R), <5mW laser output power, useable laser range of 100+ feet when in LED/Laser mode, 100+ yards when in Laser Only mode; 40 continuous hours.
    White C4 LED/Laser Mode – 4 continuous hours.
  • Powered by 3 "AAA" alkaline batteries (included)


    MicroStream®
    • C4® LED delivers 35 lumens; 360 candela; runs 2.25 hours
    • Ultra-compact design fits in the palm of your hand, comfortably fits in your pocket
    • Removable pocket clip also clips onto brim of hat for hands free use
    • Type II MIL-SPEC abrasion and corrosion-resistant anodized aircraft aluminum construction with unbreakable, scratch-resistant polycarbonate lens


    Stylus Pro Reach®
    • White C4® LED technology, impervious to shock
    • 825 candela peak beam intensity, 38 lumens
    • Uses two easily-sourced AAA alkaline batteries (included)
    • Eight-inch (20.32 cm) flexible polyethylene-coated extension cable allows for 14" (35.56 cm) of reach


    Stylus Pro®
    • White C4® LED delivers 65 lumens; 690 candela; runs 6.5 hours
    • Push button tail switch – momentary or constant on operation
    • Includes two "AAA" alkaline batteries and tear-resistant nylon holster
    • Type II MIL-SPEC abrasion and corrosion-resistant anodized aircraft aluminum construction with unbreakable, scratch-resistant polycarbonate lens


    ProTac® 1AA
    • Features Ten-Tap® Programming – Choose from three user selectable programs:
      1.) high/strobe/low (factory default)
      2.) high only
      3.) low/high
    • C4® LED illumination output and run times:
      HIGH - 70 lumens; 1,450 candela peak beam intensity; runs 2 hours
      LOW – 5 lumens; 125 candela peak beam intensity;  runs 32 hours
      STROBE – runs 4 hours
    • Solid State power regulation provides maximum light output throughout battery life


    ProTac® EMS
    • C4 LED technology offers 3 levels of increasing intensities: Low, medium and high
    • Powers on at low beam: 3.6 lumens/runs 36 hours; ideal for pupil exams. Faint peripheral illumination surrounding the focused beam slightly illuminates the opposite pupil without directly causing it to contract, facilitating observation of consensual contraction in dim light
    • Two taps of the tail switch accesses medium mode, which delivers 10 lumens/runs for 19 hours. Ideal for non-glare wound examination
    • Three taps of the tail switch accesses high mode, which delivers 50 lumens/runs 1.5 hours (1 AA alkaline); runs 3.4 hours using AA lithium battery


      3C ProPolymer® Xenon
      • Powered by 3 "C" alkaline batteries
      • 785 mA xenon gas-filled module
      • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


        3N ProPolymer® LED
        • Powered by 3 "N" alkaline batteries
        • 3 ultra-bright 100,000-hour life LEDs
        • LEDs provide up to 30 lumens, blue LEDs also available


          4AA ProPolymer® Lux Div 2
          • C4® LED technology, with a 50,000 hour lifetime.
          • Unbreakable polycarbonate lens with scratch-resistant coating.
          • 100 lumens typical; up to 4,200 candela peak beam intensity.


            4AA ProPolymer® Xenon
            • Powered by 4 "AA" alkaline batteries
            • Features a xenon gas-filled module
            • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


              2AA ProPolymer® LED
              • ATEX-approved for Category 3 (Zone 2) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum operating temperature of <100°C.
              • .5w super-bright, high-flux 30,000-hour life LED delivers 25 lumens; 2,300 candela; runs 18 hours
              • Powered by two "AA" alkaline batteries (included)
              • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
              • IP57 rated design; dust and water ingress protected


              3AA HAZ-LO
              • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <200°C.
              • RoHS compliant
              • C4® LED delivers 120 lumens; 6,800 candela; 165 meter beam distance, runs 11 hours
              • Parabolic reflector produces long range brilliance and smooth uniform beam pattern
              • Uses three "AA" alkaline batteries (included)
              • Push-button on/off switch easy to use even when wearing heavy gloves


              3C ProPolymer® Xenon
              • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
              • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
              • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
              • Waterproof/Dustproof IP65


              3N ProPolymer® LED
              • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <135°C.
              • 3 ultra-bright white 100,000-hour life LEDs deliver 30 lumens; runs 120 hours
              • Powered by three "N" alkaline batteries (included)
              • Anti-static, impact-resistant polymer construction


              4AA ProPolymer® Xenon
              • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
              • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
              • Powered by four "AA" alkaline batteries
              • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
              • Push-button tail switch for momentary or constant “on”
              • Waterproof/Dustproof IP65


              3AA HAZ-LO® LED Headlamp
              • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
              • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
              • Push-button on/off switch easy to use even when wearing heavy gloves
              • Intrinsically safe – Class I, Div 1


                3C ProPolymer® Xenon
                • Powered by 3 "C" alkaline batteries
                • 785 mA xenon gas-filled module
                • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


                  3N ProPolymer® LED
                  • Powered by 3 "N" alkaline batteries
                  • 3 ultra-bright 100,000-hour life LEDs
                  • LEDs provide up to 30 lumens, blue LEDs also available


                    4AA ProPolymer® Xenon
                    • Powered by 4 "AA" alkaline batteries
                    • Features a xenon gas-filled module
                    • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                      3AA HAZ-LO® LED Headlamp
                      • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
                      • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
                      • Push-button on/off switch easy to use even when wearing heavy gloves
                      • Intrinsically safe – Class I, Div 1


                        ClipMate®
                        • Powered by 3 "AAA" alkaline batteries
                        • Three high-intensity, 100,000-hr. life LEDs
                        • 27 lumens typical (white LEDs)

                           
                          ; Cache: False
                           Page:  Flush: