Product Selector

33 Results Found

Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
  • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


2AA ProPolymer® HAZ-LO®
  • C4® LED delivers 65 lumens; 2,300 candela; 96m beam distance; runs 24 hours
  • Powered by 2 "AA" alkaline batteries (included)
  • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
  • Impact-resistant engineering polymer construction


2AA ProPolymer® Xenon
  • Powered by 2 "AA" alkaline batteries
  • Xenon gas-filled bi-pin bulb
  • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


3C ProPolymer® LED
  • Powered by 3 "C" alkaline batteries
  • 10 ultra-bright 100,000-hour life LEDs
  • 85 lumens typical with 10 white LEDs, blue LEDs also available


    3C ProPolymer® Lux Div 1
    • Powered by 3 "C" alkaline batteries
    • Up to 3,500 Candela (peak beam intensity), 44 lumens (typical)
    • Runs up to 4 hrs. at full intensity with 16 additional hrs. of declining usable light


      3C ProPolymer® Xenon
      • Powered by 3 "C" alkaline batteries
      • 785 mA xenon gas-filled module
      • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


        4AA ProPolymer® LED
        • Powered by 4 "AA" alkaline batteries
        • 7 ultra-bright 100,000-hour life LEDs
        • 67 lumens typical with 7 white LEDs, blue LEDs also available


          4AA ProPolymer® Lux Div 1
          • C4® LED technology, with a 50,000 hour lifetime.
          • Unbreakable polycarbonate lens with scratch-resistant coating.
          • 100 lumens typical; up to 4,200 candela peak beam intensity.


            4AA ProPolymer® Xenon
            • Powered by 4 "AA" alkaline batteries
            • Features a xenon gas-filled module
            • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


              2AA ProPolymer® HAZ-LO®
              • C4® LED delivers 65 lumens; 2,300 candela; 96m beam distance; runs 24 hours
              • Powered by 2 "AA" alkaline batteries (included)
              • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
              • Impact-resistant engineering polymer construction


              2AA ProPolymer® Xenon
              • Powered by 2 "AA" alkaline batteries
              • Xenon gas-filled bi-pin bulb
              • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


              3AA HAZ-LO® LED Headlamp
              • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
              • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
              • Push-button on/off switch easy to use even when wearing heavy gloves
              • Intrinsically safe – Class I, Div 1


                3C ProPolymer® LED
                • Powered by 3 "C" alkaline batteries
                • 10 ultra-bright 100,000-hour life LEDs
                • 85 lumens typical with 10 white LEDs, blue LEDs also available


                  3C ProPolymer® Lux Div 1
                  • Powered by 3 "C" alkaline batteries
                  • Up to 3,500 Candela (peak beam intensity), 44 lumens (typical)
                  • Runs up to 4 hrs. at full intensity with 16 additional hrs. of declining usable light


                    3C ProPolymer® Xenon
                    • Powered by 3 "C" alkaline batteries
                    • 785 mA xenon gas-filled module
                    • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


                      4AA ProPolymer® LED
                      • Powered by 4 "AA" alkaline batteries
                      • 7 ultra-bright 100,000-hour life LEDs
                      • 67 lumens typical with 7 white LEDs, blue LEDs also available


                        4AA ProPolymer® Lux Div 1
                        • C4® LED technology, with a 50,000 hour lifetime.
                        • Unbreakable polycarbonate lens with scratch-resistant coating.
                        • 100 lumens typical; up to 4,200 candela peak beam intensity.


                          4AA ProPolymer® Xenon
                          • Powered by 4 "AA" alkaline batteries
                          • Features a xenon gas-filled module
                          • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                            Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
                            • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                            • Features a 210 degree articulating head that rotates a full 360 degrees
                            • 4 lighting modes
                            • Optimized electronics provide regulated intensity


                            Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
                            • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                            • Features a 210 degree articulating head that rotates a full 360 degrees
                            • 4 lighting modes
                            • Optimized electronics provide regulated intensity


                            3AA HAZ-LO® LED Headlamp
                            • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
                            • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
                            • Push-button on/off switch easy to use even when wearing heavy gloves
                            • Intrinsically safe – Class I, Div 1


                              2AA ProPolymer® Xenon
                              • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
                              • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
                              • Powered by two "AA" alkaline batteries (included)
                              • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
                              • IP57 rated design; dust and water ingress protected


                              3C ProPolymer® LED
                              • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                              • 10 ultra-bright white 100,000-hour life LEDs deliver 54 lumens; runs 336 hours
                              • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                              • Waterproof/Dustproof IP65


                              3C ProPolymer® Xenon
                              • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
                              • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
                              • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                              • Waterproof/Dustproof IP65


                              4AA ProPolymer® LED
                              • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                              • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
                              • Powered by four "AA" alkaline batteries (included)
                              • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                              • Push-button tail switch for momentary or constant “on”
                              • Waterproof/Dustproof IP65


                              4AA ProPolymer® LUX
                              • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                              • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
                              • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
                              • Uses four "AA" alkaline batteries (included)
                              • IP67; waterproof to 1 meter for 30 minutes


                              4AA ProPolymer® Xenon
                              • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
                              • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
                              • Powered by four "AA" alkaline batteries
                              • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                              • Push-button tail switch for momentary or constant “on”
                              • Waterproof/Dustproof IP65


                              Survivor® LED (Alkaline Model)
                              • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp)continually preset. It has a maximum adverse surface temperature of <135°C.
                              • Available in rechargeable and alkaline models
                              • Features C4® LED technology with four lighting modes
                              • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
                              • IP54 water-resistant; 2 meter impact resistance tested


                              Knucklehead® HAZ-LO® – Flood Model
                              • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                              • Features a 210 degree articulating head that rotates a full 360 degrees
                              • 4 lighting modes
                              • Optimized electronics provide regulated intensity


                              Knucklehead® HAZ-LO® – Spot Model
                              • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                              • Features a 210 degree articulating head that rotates a full 360 degrees
                              • 4 lighting modes
                              • Optimized electronics provide regulated intensity


                              Knucklehead® HAZ-LO® – Flood Model
                              • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                              • Features a 210 degree articulating head that rotates a full 360 degrees
                              • 4 lighting modes
                              • Optimized electronics provide regulated intensity


                              Knucklehead® HAZ-LO® – Spot Model
                              • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                              • Features a 210 degree articulating head that rotates a full 360 degrees
                              • 4 lighting modes
                              • Optimized electronics provide regulated intensity

                               
                              ; Cache: False
                               Page:  Flush: