Product Selector

21 Results Found

3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
  • Kit includes:
    • 3AA ProPolymer® HAZ-LO® with alkaline batteries
    • Streamlight Helmet Mount
    • Rubber Helmet Strap


2AA ProPolymer® HAZ-LO®
  • C4® LED delivers 65 lumens; 2,300 candela; 96m beam distance; runs 24 hours
  • Powered by 2 "AA" alkaline batteries (included)
  • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
  • Impact-resistant engineering polymer construction


3AA ProPolymer® HAZ-LO®
  • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations
  • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
  • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
  • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
  • Combination of visual and mechanical polarity protection ensures correct installation of batteries
  • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
  • Kit includes:
    • 3AA ProPolymer® HAZ-LO® with alkaline batteries
    • Streamlight Helmet Mount
    • Rubber Helmet Strap


2AA ProPolymer® HAZ-LO®
  • C4® LED delivers 65 lumens; 2,300 candela; 96m beam distance; runs 24 hours
  • Powered by 2 "AA" alkaline batteries (included)
  • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
  • Impact-resistant engineering polymer construction


3AA ProPolymer® HAZ-LO®
  • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations
  • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
  • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
  • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
  • Combination of visual and mechanical polarity protection ensures correct installation of batteries
  • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
  • Kit includes:
    • 3AA ProPolymer® HAZ-LO® with alkaline batteries
    • Streamlight Helmet Mount
    • Rubber Helmet Strap


3AA HAZ-LO® LED Headlamp
  • ATEX-rated for Category 1G (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <200°C
  • RoHS compliant
  • C4® LED delivers 120 lumens; 6,800 candela; 165 meter beam distance, runs 11 hours
  • Parabolic reflector produces long range brilliance and smooth uniform beam pattern
  • Push-button on/off switch easy to use even when wearing heavy gloves


3AA ProPolymer® HAZ-LO®
  • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations
  • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
  • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
  • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
  • Combination of visual and mechanical polarity protection ensures correct installation of batteries
  • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


3AA ProPolymer® HAZ-LO® 7 LED
  • Rated for Zone 0 locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum surface temperature of <135°C
  • A cluster of seven 5mm LEDs provide a soft, wide beam for tasks at arm’s length and other up-close task lighting
  • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
  • "Captured locking" set screw will not back out - prevents FOD (Foreign Object Debris)
  • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment


3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
  • Kit includes:
    • 3AA ProPolymer® HAZ-LO® with alkaline batteries
    • Streamlight Helmet Mount
    • Rubber Helmet Strap


Argo® HAZ-LO® Headlamp
  • ATEX and IECEx-rated for Category 1G (Zone 0) explosive gas group IIA locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is continually present. It has a maximum adverse surface temperature of 135°C.
  • ATEX and IECEx-rated for Category 2G (Zone 1) explosive gas group IIA locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of 135°C.
  • Meets lighting needs to illuminate objects at a distance
  • Features one white C4® LED with two output modes — Low and High
  • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation
  • 90º tilting head features a robust ratcheting system; prevents neck fatigue


Septor® HAZ-LO® Headlamp
  • ATEX and IECEx-rated for Category 1G (Zone 0) explosive gas group IIA locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is continually present. It has a maximum adverse surface temperature of 135°C
  • ATEX and IECEx-rated for Category 2G (Zone 1) explosive gas group IIB locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of 135°C
  • Meets lighting needs for “up close” work where seeing details is important; provides a soft, wide beam to flood your work area with light that won’t tire out your eyes.
  • Features 7 white 5mm LEDs with two lighting modes - Low and High
  • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation
  • 90º tilting head features a robust ratcheting system; prevents neck fatigue


Stylus Reach®
  • ATEX-rated for Category 2G (Zone 1) locations. IECEx-rated for Group IIB locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation. It has a maximum adverse surface temperature of <300°C
  • Features a 17.78 cm extension cable that allows for 35.6 cm of reach so you can illuminate those hard-to-reach areas
  • High-intensity 100,000 hour white LED delivers 11 lumens; 140 candela peak beam intensity, 24m beam distance; runs 24 hours
  • Uses three "AAAA" alkaline batteries (included)
  • Features a momentary blink switch and constant on


Stylus®
  • ATEX-rated for Category 2G (Zone 1) locations. IECEx-rated for Group IIB locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation. It has a maximum adverse surface temperature of <300°C
  • High-intensity 100,000 hour white LED delivers 11 lumens; 140 candela peak beam intensity, 24m beam distance; runs 24 hours
  • Uses three "AAAA" alkaline batteries (included)
  • Features a momentary blink switch and constant on
  • Durable anodized aluminum construction; available in black
  • IPX4 water-resistant


Survivor® (Low Profile) ATEX (Alkaline Model)
  • Rated for Zone 0. The redesigned Survivor features a low-profile bezel that doesn’t interfere with gear and equipment. We also redesigned the clip and added a reinforced D-ring so your light hangs forward
  • Available in rechargeable and non-rechargeable models
  • Features C4® LED technology with four lighting modes: High, Low, Flash and Moonlight
  • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
  • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation
  • Optimized electronics provide regulated intensity
  • IP66 water-resistant; 2 meter impact resistance tested


Survivor® LED (Alkaline Model)
  • ATEX-rated for Category 1G (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <135°C
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes: High, Low, Flash and Moonlight
  • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications
  • Optimum peripheral illumination to aid in navigation
  • Spring loaded clip with built-in ring easily attaches to belts and harnesses
  • IP54 water-resistant; 2 meter impact resistance tested


Trident® HAZ-LO® Headlamp
  • ATEX and IECEx-rated for Category 1G (Zone 0) explosive gas group IIA locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is continually present. It has a maximum adverse surface temperature of 135°C
  • ATEX and IECEx-rated for Category 2G (Zone 1) explosive gas group IIB locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of 135°C
  • Meets lighting needs for both close-up and distance work
  • Features center C4® LED and three ultra-bright white 5mm LEDs with two output modes
  • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation
  • 90º tilting head features a robust ratcheting system; prevents neck fatigue
  • IPX4 rated for water resistance; 2 meter impact resistance tested


Survivor® (Low Profile) ATEX
  • Rated for Zone 0. The redesigned Survivor features a low-profile bezel that doesn’t interfere with gear and equipment. We also redesigned the clip and added a reinforced D-ring so your light hangs forward
  • Available in rechargeable and non-rechargeable models
  • Features C4® LED technology with four lighting modes: High, Low, Flash and Moonlight
  • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
  • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation
  • Optimized electronics provide regulated intensity
  • Industrial rechargeable lithium ion battery can be recharged up to 1,500 times. Also accepts four "AA" alkaline or lithium non-rechargeable batteries
  • IP66 water-resistant; 2 meter impact resistance tested


Survivor® LED
  • ATEX-rated for Category 2G (Zone 1) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes: High, Low, Flash and Moonlight
  • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications.
  • Optimum peripheral illumination to aid in navigation
  • Spring loaded clip with built-in ring easily attaches to belts and harnesses
  • Industrial rechargeable NiCd battery can be recharged up to 1,000 times. Also accepts four "AA" alkaline non-rechargeable batteries for fast replacement with readily available batteries
  • IP54 water-resistant; 2 meter impact resistance tested


Vulcan® LED ATEX

  

  • Click here for Data Sheet
  • ATEX-rated for Category 3 (Zones 2 and 22) locations. IECEx-rated for Group IIC and IIIC locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <120°C Gas, 65°C Dust.
  • C4® LED with high, low and blink modes
  • Deep-dish parabolic reflector produces a tight beam with optimum peripheral illumination to aid in navigation
  • Lightweight lithium ion battery recharge in 5 hours
  • IP66; dust tight and water-resistant; 2m impact resistance tested
  • Fits all the existing Vulcan series charging bases/racks already in service
  • Uses the same battery as the previous model ATEX Fire Vulcan LED

 


 
; Cache: False
 Page:  Flush: