Kit de iluminación de casco ProPolymer® 3AA HAZ-LO®

Este kit de iluminación universal se ajusta igualmente a cascos de bomberos de diseño tradicional y moderno. Supone una alternativa económica, ligera y discreta para instalar una linterna de forma segura en casi cualquier tipo de casco de bombero.

  • Kit includes:
    • 3AA ProPolymer® HAZ-LO® with alkaline batteries
    • Streamlight Helmet Mount
    • Rubber Helmet Strap
  • Streamlight Helmet Mount can be used in conjunction with Streamlight’s 3AA ProPolymer HAZ-LO series or 4AA ProPolymer series of flashlights. Durable, lightweight, aluminum mount easily attaches to the brim of firefighter’s helmets with no tools required
  • Rubber Helmet Strap can be used in conjunction with Streamlight’s 3AA ProPolymer HAZ-LO series or 4AA ProPolymer series of flashlights. It is a quick and easy, “no tools required” method to attach your 3AA/4AA ProPolymer flashlight to almost any helmet. Made of engineered high-strength rubber. Also fits hard hats.
  • 3AA ProPolymer HAZ-LO specs:
    • Safety measures: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment Combination of visual and mechanical polarity protection ensures correct installation of batteries
    • Light designed to not power on if batteries are installed incorrectly
    • Sealed switch design protects it from corrosion caused by battery leakage
    • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours
    • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
    • Regulated run time provides consistent performance throughout battery life
    • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
    • O-ring sealed, dust-proof, water-tight enclosure
    • IP67 rated for dust-tight and waterproof to 1 meter for 30 minutes
    • IPX4 for water spray
    • 3 meter impact resistance tested
    • 3 “AA” alkaline batteries reduce battery and recycling costs by 25%
    • 7.00 in. (17.78 cm); 7.5 oz (213 grams) with batteries (included)
    • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum operating temperature of <135°C.
Abrazadera para casco
Abrazadera para casco
seperator
Tira de goma para casco
Tira de goma para casco

CUADRO DE COMPARACIÓN

No se ha especificado ningún producto

LOCALIZAR UN DISTRIBUIDOR

Introduzca su código postal:
 
; Cache: False
 Page:  Flush: