HAZ-LO®

Your safety is important to us.

There are several types of locations in which it can be extremely dangerous to use any light that has not been specifically designed — and approved — for that kind of location. These are areas where fire or explosion hazards may exist due to the presence of flammable gases, liquids, vapors, dusts, or ignitable fibers or flyings. If you will be using a flashlight in any potentially hazardous location, it is critical that your flashlight be safety-rated for that specific kind of environment. The information in this section will help you choose a lighting tool that’s both safe and effective for your needs. You’ll see that Streamlight makes a variety of lights that are safe to use in the environment in which you will be working.

Click here to see Rechargeable Haz-Lo models!

HAZ-LO® SERIES


3AA ProPolymer® Dualie®
  • INTRINSICALLY SAFE
  • Click here for Data Sheet
  • Features two C4® LEDs and three lighting modes: spot, flood, spot and flood simultaneously
  • Beams intersect for optimum path illumination and no blind spots
  • Dual head switches on either side of the body for easy beam selection and one-handed operation
  • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


3AA ProPolymer® Dualie® Laser
  • INTRINSICALLY SAFE
  • Dualie Laser model features one C4® LED and a 640nm - 650nm red laser and three lighting modes: spot, laser, spot and laser simultaneously
  • Dual head switches on either side of the body for easy beam selection and one-handed operation
  • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


Survivor® (Alkaline Model)
  • Click here for Data Sheet
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes:
    • High for a super-bright beam that pierces through smoke
    • Low for bright light and longer run time
    • Flash for signaling
    • Moonlight mode provides low-level lighting for battery conservation
  • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
  • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


Argo® HAZ-LO® Headlamp
  • Meets lighting needs to illuminate objects at a distance
  • Features one white C4® LED with low and high output modes
  • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


Septor® HAZ-LO® Headlamp
  • Meets lighting needs for a “up close” work when  seeing details is important
  • Features 7 white 5mm LEDs with low and high lighting modes
  • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


Trident® HAZ-LO® Headlamp
  • Meets lighting needs for both close-up and distance work
  • Features center C4® LED and three ultra-bright white 5mm LEDs with low and high output modes
  • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


2AA ProPolymer® HAZ-LO®
  • C4® LED delivers 65 lumens; 2,300 candela; 96m beam distance; runs 24 hours
  • Powered by 2 "AA" alkaline batteries (included)
  • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
  • Impact-resistant engineering polymer construction


3AA ProPolymer® HAZ-LO®
  • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations
  • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
  • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
  • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
  • Combination of visual and mechanical polarity protection ensures correct installation of batteries
  • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


3C ProPolymer® HAZ-LO®
  • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
  • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
  • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
  • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
  • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


3AA HAZ-LO® LED Headlamp
  • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
  • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
  • Push-button on/off switch easy to use even when wearing heavy gloves
  • Intrinsically safe – Class I, Div 1


    Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
    • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 lighting modes
    • Optimized electronics provide regulated intensity


    Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
    • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 lighting modes
    • Optimized electronics provide regulated intensity


    4AA ProPolymer® Lux Div 1
    • C4® LED technology, with a 50,000 hour lifetime.
    • Unbreakable polycarbonate lens with scratch-resistant coating.
    • 100 lumens typical; up to 4,200 candela peak beam intensity.


      4AA ProPolymer® LED
      • Powered by 4 "AA" alkaline batteries
      • 7 ultra-bright 100,000-hour life LEDs
      • 67 lumens typical with 7 white LEDs, blue LEDs also available


        3C ProPolymer® Lux Div 1
        • Powered by 3 "C" alkaline batteries
        • Up to 3,500 Candela (peak beam intensity), 44 lumens (typical)
        • Runs up to 4 hrs. at full intensity with 16 additional hrs. of declining usable light


          3C ProPolymer® LED
          • Powered by 3 "C" alkaline batteries
          • 10 ultra-bright 100,000-hour life LEDs
          • 85 lumens typical with 10 white LEDs, blue LEDs also available


            4AA ProPolymer® Xenon
            • Powered by 4 "AA" alkaline batteries
            • Features a xenon gas-filled module
            • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


              3C ProPolymer® Xenon
              • Powered by 3 "C" alkaline batteries
              • 785 mA xenon gas-filled module
              • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


                3N ProPolymer® LED
                • Three ultra-bright white LEDs provide a soft flood beam for up-close tasks
                • 30 lumens; 300 candela; 35m beam distance; runs 10 hours
                • Impact and chemical resistant polymer resin; o-ring sealed and vented; impact resistant polymer facecap overmolded onto polycarbonate lens
                • IPX4 water resistant; 2 meter impact resistance tested


                2AA ProPolymer® Xenon
                • Powered by 2 "AA" alkaline batteries
                • Xenon gas-filled bi-pin bulb
                • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


                Stylus® – UL Model
                • Body available in Black
                • High-intensity 100,000 hour LED available in Artic White
                • Light Output: 140 candela peak beam intensity, 24m beam distance and 11 lumens measured system output.


                  Stylus Reach® – UL Model
                  • High-intensity white LED
                  • 140 Candela peak beam intensity, 11 lumens
                  • Uses three "AAAA" size alkaline batteries (included)
                  • Seven-inch extension cable allows for 14" (35.6cm) of reach
                  • Intrinsically safe.


                  3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                  • Kit includes:
                    • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                    • Streamlight Helmet Mount
                    • Rubber Helmet Strap
                   
                  ; Cache: True
                   Page:  Flush: