Product Selector

37 Results Found

Stylus® – UL Model
  • Body available in Black
  • High-intensity 100,000 hour LED available in Artic White
  • Light Output: 140 candela peak beam intensity, 24m beam distance and 11 lumens measured system output.


    Survivor® (Alkaline Model)
    • Click here for Data Sheet
    • Available in rechargeable and alkaline models
    • Features C4® LED technology with four lighting modes:
      • High for a super-bright beam that pierces through smoke
      • Low for bright light and longer run time
      • Flash for signaling
      • Moonlight mode provides low-level lighting for battery conservation
    • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
    • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


    Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
    • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 lighting modes
    • Optimized electronics provide regulated intensity


    Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
    • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 lighting modes
    • Optimized electronics provide regulated intensity


    3AA ProPolymer® Dualie®
    • INTRINSICALLY SAFE
    • Click here for Data Sheet
    • Features two C4® LEDs and three lighting modes: spot, flood, spot and flood simultaneously
    • Beams intersect for optimum path illumination and no blind spots
    • Dual head switches on either side of the body for easy beam selection and one-handed operation
    • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


    3AA ProPolymer® Dualie® Laser
    • INTRINSICALLY SAFE
    • Dualie Laser model features one C4® LED and a 640nm - 650nm red laser and three lighting modes: spot, laser, spot and laser simultaneously
    • Dual head switches on either side of the body for easy beam selection and one-handed operation
    • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


    3C ProPolymer® HAZ-LO®
    • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
    • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
    • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
    • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
    • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


    3AA HAZ-LO® LED Headlamp
    • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
    • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
    • Push-button on/off switch easy to use even when wearing heavy gloves
    • Intrinsically safe – Class I, Div 1


      3AA ProPolymer® Dualie®
      • INTRINSICALLY SAFE
      • Click here for Data Sheet
      • Features two C4® LEDs and three lighting modes: spot, flood, spot and flood simultaneously
      • Beams intersect for optimum path illumination and no blind spots
      • Dual head switches on either side of the body for easy beam selection and one-handed operation
      • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


      3AA ProPolymer® Dualie® Laser
      • INTRINSICALLY SAFE
      • Dualie Laser model features one C4® LED and a 640nm - 650nm red laser and three lighting modes: spot, laser, spot and laser simultaneously
      • Dual head switches on either side of the body for easy beam selection and one-handed operation
      • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


      3C ProPolymer® HAZ-LO®
      • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


      Argo® HAZ-LO® Headlamp
      • Meets lighting needs to illuminate objects at a distance
      • Features one white C4® LED with low and high output modes
      • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


      Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
      • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
      • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      Septor® HAZ-LO® Headlamp
      • Meets lighting needs for a “up close” work when  seeing details is important
      • Features 7 white 5mm LEDs with low and high lighting modes
      • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


      Stylus® – UL Model
      • Body available in Black
      • High-intensity 100,000 hour LED available in Artic White
      • Light Output: 140 candela peak beam intensity, 24m beam distance and 11 lumens measured system output.


        Survivor® (Alkaline Model)
        • Click here for Data Sheet
        • Available in rechargeable and alkaline models
        • Features C4® LED technology with four lighting modes:
          • High for a super-bright beam that pierces through smoke
          • Low for bright light and longer run time
          • Flash for signaling
          • Moonlight mode provides low-level lighting for battery conservation
        • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
        • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


        Trident® HAZ-LO® Headlamp
        • Meets lighting needs for both close-up and distance work
        • Features center C4® LED and three ultra-bright white 5mm LEDs with low and high output modes
        • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


        3AA HAZ-LO® LED Headlamp
        • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
        • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
        • Push-button on/off switch easy to use even when wearing heavy gloves
        • Intrinsically safe – Class I, Div 1


          Argo® HAZ-LO® Headlamp
          • Meets lighting needs to illuminate objects at a distance
          • Features one white C4® LED with low and high output modes
          • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


          Septor® HAZ-LO® Headlamp
          • Meets lighting needs for a “up close” work when  seeing details is important
          • Features 7 white 5mm LEDs with low and high lighting modes
          • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


          Trident® HAZ-LO® Headlamp
          • Meets lighting needs for both close-up and distance work
          • Features center C4® LED and three ultra-bright white 5mm LEDs with low and high output modes
          • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


          3AA HAZ-LO® LED Headlamp
          • ATEX-rated for Category 1G (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <200°C
          • RoHS compliant
          • C4® LED delivers 120 lumens; 6,800 candela; 165 meter beam distance, runs 11 hours
          • Parabolic reflector produces long range brilliance and smooth uniform beam pattern
          • Push-button on/off switch easy to use even when wearing heavy gloves


          3AA ProPolymer® HAZ-LO® 7 LED
          • Rated for Zone 0 locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum surface temperature of <135°C
          • A cluster of seven 5mm LEDs provide a soft, wide beam for tasks at arm’s length and other up-close task lighting
          • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
          • "Captured locking" set screw will not back out - prevents FOD (Foreign Object Debris)
          • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment


          3C ProPolymer® HAZ-LO®
          • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
          • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
          • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
          • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
          • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


          Argo® HAZ-LO® Headlamp
          • ATEX and IECEx-rated for Category 1G (Zone 0) explosive gas group IIA locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is continually present. It has a maximum adverse surface temperature of 135°C.
          • ATEX and IECEx-rated for Category 2G (Zone 1) explosive gas group IIA locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of 135°C.
          • Meets lighting needs to illuminate objects at a distance
          • Features one white C4® LED with two output modes — Low and High
          • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation
          • 90º tilting head features a robust ratcheting system; prevents neck fatigue


          Septor® HAZ-LO® Headlamp
          • ATEX and IECEx-rated for Category 1G (Zone 0) explosive gas group IIA locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is continually present. It has a maximum adverse surface temperature of 135°C
          • ATEX and IECEx-rated for Category 2G (Zone 1) explosive gas group IIB locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of 135°C
          • Meets lighting needs for “up close” work where seeing details is important; provides a soft, wide beam to flood your work area with light that won’t tire out your eyes.
          • Features 7 white 5mm LEDs with two lighting modes - Low and High
          • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation
          • 90º tilting head features a robust ratcheting system; prevents neck fatigue


          Survivor® LED (Alkaline Model)
          • ATEX-rated for Category 1G (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <135°C
          • Available in rechargeable and alkaline models
          • Features C4® LED technology with four lighting modes: High, Low, Flash and Moonlight
          • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications
          • Optimum peripheral illumination to aid in navigation
          • Spring loaded clip with built-in ring easily attaches to belts and harnesses
          • IP54 water-resistant; 2 meter impact resistance tested


          Trident® HAZ-LO® Headlamp
          • ATEX and IECEx-rated for Category 1G (Zone 0) explosive gas group IIA locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is continually present. It has a maximum adverse surface temperature of 135°C
          • ATEX and IECEx-rated for Category 2G (Zone 1) explosive gas group IIB locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of 135°C
          • Meets lighting needs for both close-up and distance work
          • Features center C4® LED and three ultra-bright white 5mm LEDs with two output modes
          • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation
          • 90º tilting head features a robust ratcheting system; prevents neck fatigue
          • IPX4 rated for water resistance; 2 meter impact resistance tested


          Knucklehead® HAZ-LO® – Flood Model
          • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
          • Features a 210 degree articulating head that rotates a full 360 degrees
          • 4 lighting modes
          • Optimized electronics provide regulated intensity


          Knucklehead® HAZ-LO® – Spot Model
          • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
          • Features a 210 degree articulating head that rotates a full 360 degrees
          • 4 lighting modes
          • Optimized electronics provide regulated intensity


          Polystinger® LED HAZ-LO®
          • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
          • 3 modes:
            High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
            Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
            Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
          • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


            Survivor®
            • Click here for Data Sheet
            • Available in rechargeable and alkaline models
            • Features C4® LED technology with four lighting modes:
              • High for a super-bright beam that pierces through smoke
              • Low for bright light and longer run time
              • Flash for signaling
              • Moonlight mode provides low-level lighting for battery conservation
            • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
            • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


            Knucklehead® HAZ-LO® – Flood Model
            • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
            • Features a 210 degree articulating head that rotates a full 360 degrees
            • 4 lighting modes
            • Optimized electronics provide regulated intensity


            Knucklehead® HAZ-LO® – Spot Model
            • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
            • Features a 210 degree articulating head that rotates a full 360 degrees
            • 4 lighting modes
            • Optimized electronics provide regulated intensity


            Polystinger® LED HAZ-LO®
            • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
            • 3 modes:
              High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
              Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
              Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
            • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


              Survivor®
              • Click here for Data Sheet
              • Available in rechargeable and alkaline models
              • Features C4® LED technology with four lighting modes:
                • High for a super-bright beam that pierces through smoke
                • Low for bright light and longer run time
                • Flash for signaling
                • Moonlight mode provides low-level lighting for battery conservation
              • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
              • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation

               
              ; Cache: True
               Page:  Flush: