Product Selector

38 Results Found

PolyTac® Helmet Lighting Kit
  • Kit includes:
    • PolyTac with lithium batteries
    • Streamlight Helmet Mount
    • Rubber Helmet Strap
  • PolyTac specs:
    • C4® LED technology within a parabolic reflector produces a concentrated beam with optimum peripheral illumination
    • TEN-TAP® Programming: Choice of three operating modes: 1.) high/strobe/low (factory default); 2.) high only; 3.) low/high
    • Solid State power regulation provides maximum light output throughout battery life
         


NightFighter® LED
  • Anti-roll head
  • C4® LED – Up to 9000 candela (peak beam intensity); 160 lumens
  • Up to 3.5 hours of runtime to the 10% output level.


PolyTac®
  • C4® LED technology within a parabolic reflector produces a concentrated beam with optimum peripheral illumination
  • TEN-TAP® Programming with a choice of three operating modes
  • Solid State power regulation provides maximum light output throughout battery life
  • Reflector produces a concentrated beam with optimum peripheral illumination — ideal for law enforcement backup light; day-to-day industrial use; maintaining vehicles; general contracting work


PolyTac® HP
  • C4® LED technology within a deep reflector provides far-reaching targeting beam with a tight spotlight and optimum peripheral illumination
  • TEN-TAP® Programming with choice of three operating modes:
  • Solid State power regulation provides maximum light output throughout battery life
  • Deep reflector produces 275m beam - ideal for lighting the way to the end of a dark alley, down a wooded path, inspecting utility lines from the ground, or search and rescue missions


Scorpion® LED
  • Anti-roll head
  • C4® LED is 2X brighter than a Super high-flux LED – 9,000 candela (peak beam intensity); 160 lumens
  • Up to 3.5 hours of runtime to the 10% output level.


Super Tac®
  • C4® LED, shock-proof with a 50,000 hr lifetime, is 3X brighter than a super high-flux LED
  • Up to 30,000 candela (peak beam intensity); 160 lumens measured system output.
  • Deep-dish parabolic reflector produces a long range targeting beam with optimum peripheral illumination to aid in navigation. Optimized electronics provide regulated intensity.
  • Runtime: up to 3.5 hours to the 10% output level


TL-2® LED
  • Team Soldier Certified Gear
  • C4® LED is 2X brighter than a Super high-flux LED – Up to 9000 candela (peak beam intensity); 160 lumens
  • Up to 3.5 hours of runtime to the 10% output level.


TLR-1®
  • Powered by two 3-volt CR123 lithium batteries with 10-year storage life
  • C4® LED technology, impervious to shock with a 50,000 hour lifetime
  • LED Rating: Up to 12,000 candela peak beam intensity and up to 300 lumens measured system output. Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination
  • Run Time: 2.5 hours regulated run time. Solid-state current regulation for consistent illumination level.


TLR-1® Game Spotter®
  • Features a shock-proof, green C4® LED that produces a long-range beam that reaches 350 meters
  • Green LED combined with a deep-dish parabolic reflector produces an intense hot-spot that provides long-range identification, preserves night vision and won’t spook varmints
  • 31,000 candela peak beam intensity; 150 lumens; Runs 1.75 hours
  • Mounts directly to all MIL-STD-1913 (Picatinny) rails and weapons with Glock-style rails


TLR-1®s
  • Powered by two 3-volt CR123A lithium batteries with 10-year storage life
  • C4® LED technology, impervious to shock with a 50,000 hour lifetime
  • LED Rating: Up to 12,000 candela peak beam intensity and up to 300 lumens measured system output. Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination
  • Run Time: 2.5 hours regulated run time. Solid-state current regulation for consistent illumination level.


TLR-2®
  • Powered by two 3-volt CR123 lithium batteries with 10-year storage life
  • C4® LED Technology, impervious to shock with a 50,000 hour lifetime.
  • Up to 12,000 candela peak beam intensity and up to 300 lumens measured system output.
  • Up to 2.5 hrs runtime; LASER ONLY runs 48 hours.


TLR-2® G
  • C4® LED technology, impervious to shock with a 50,000 hour lifetime; Highly visible 522-542 nm green laser
  • C4 LED delivers 6,300 candela peak beam intensity; 200 lumens
  • Textured parabolic reflector produces a concentrated beam with optimum peripheral illumination
  • Runs 1.5 hours (LED only); Runs 1.25 (LED/Laser combo); Laser only function runs 9 hours


TLR-2®s
  • Powered by two 3-volt CR123A lithium batteries with 10-year storage life
  • C4® LED with blinding beam (up to 12,000 candela peak beam intensity and up to 300 lumens measured system output) with optimum peripheral illumination – will not break or burn out!
  • Strobe model with user programmable strobe enable/disable
  • Up to 2.5 hr. Run Time


TLR-3®
  • C4® LED delivers 5300 candela peak beam intensity; 125 lumens
  • Runs 1.5 continuous hours to the 10% output level
  • Textured parabolic reflector produces a concentrated beam with optimum peripheral illumination; optimized electronics provide regulated intensity
  • Compact - Weighs 2.32 ounces (65.8 grams) with included battery; 2.71 in. (6.88 cm)


TLR-4®
  • Features C4® LED technology and a 640-660nm red laser
  • 5300 candela peak beam intensity; 125 lumens
  • Runs 1.5 hours to the 10% output level ( LED only or LED and laser); 11 hours (laser only)
  • Compact – weighs 2.81 oz. (79.7g) with included battery; 2.73" (6.93 cm)


TLR-4® G
  • Features C4® LED technology and a 510-530nm direct drive green laser with wide operating temperature range
  • 5200 candela peak beam intensity; 115 lumens
  • Green laser provides high visibility long-range targeting


TLR-VIR®
  • Illumination sources:
    • Visible C4® LED, impervious to shock with a 50,000 hour lifetime
      • 12,000 candela peak beam intensity; 300 lumens; runs 2.5 hours
      • Deep dish parabolic reflector produces a concentrated beam with optimum peripheral illumination
    • Infrared illuminator - 850 nm LED. Shock-proof with a 20,000 hour lifetime
      • 1000mW/sr (min) radiant intensity providing optimum illumination when using night vision equipment; runs 20 hours
  • Solid-state current regulation for consistent illumination level
  • 6000 series anodized machined aircraft aluminum body with high impact, chemically resistant engineering polymer IR LED housing


Fire Vulcan®
  • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <135°C Gas, 53°C Dust.
  • Features high-intensity xenon bi-pin bulb and two ultra-bright blue taillight LEDs
  • Xenon bulb delivers 50 lumens; 31,000 candela
  • Strobe and Steady Modes
  • 6V 4.5 amp-hour rechargeable battery can be recharged up to 500 times
  • Waterproof/Dustproof IP66


Fire Vulcan® LED
  • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <120°C Gas, 65°C Dust.
  • Features C4® LED, impervious to shock with a 50,000 hr lifetime and two ultra-bright blue taillight LEDs
  • 2 levels of light output
  • Deep-dish parabolic reflector produces a tight beam with optimum peripheral illumination to aid in navigation; Optimized electronics provide regulated intensity
  • Two lightweight lithium ion nanotechnology cells; recharges in 5 hrs
  • 8 programmable switch functions
  • Waterproof/Dustproof IP66


Fire Vulcan® Vehicle Mount System
  • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <135°C Gas, 53°C Dust.
  • Features high-intensity xenon bi-pin bulb and two ultra-bright blue taillight LEDs
  • Xenon bulb delivers 50 lumens; 31,000 candela
  • Strobe and Steady Modes
  • 6V 4.5 amp-hour rechargeable battery can be recharged up to 500 times
  • Waterproof/Dustproof IP66


Vulcan®
  • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <135°C Gas, 53°C Dust.
  • High-intensity 3 watt spot xenon bulb provides 50 lumens; 31,000 candela; runs 13 hours
  • Zero-maintenance 4.5 amp-hour sealed lead acid battery is rechargeable up to 500 times
  • Features a three-position toggle switch for easy use with gloves
  • High-impact ABS thermoplastic housing with rubberized cushioned grip handle
  • Waterproof/Dustproof IP66


Vulcan® Dual Filament System
  • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <450°C Gas, 62°C Dust.
  • Xenon dual filament 8 watt safety bulb delivers instant backup beam has up to 157 lumens,, 70,000 candela each; runs 3.25 hours
  • Zero-maintenance 4.5 amp-hour sealed lead acid battery is rechargeable up to 500 times
  • Features a three-position toggle switch for easy use with gloves
  • High-impact ABS thermoplastic housing with rubberized cushioned grip handle
  • Waterproof/Dustproof IP66


Vulcan® Vehicle Mount System
  • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <135°C Gas, 53°C Dust.
  • High-intensity 3 watt spot xenon bulb or 8 watt spot xenon dual filament safety bulb that delivers instant backup beam
    • 3 watt spot provides 50 lumens; 31,000 candela; runs 13 hours
    • Each Dual filament 8 watt spot provides 157 lumens; 70,000 candela each; runs 3.25 hours
  • Features a three-position toggle switch for easy use with gloves
  • Zero-maintenance 4.5 amp-hour sealed lead acid battery is rechargeable up to 500 times
  • High-impact ABS thermoplastic housing with rubberized cushioned grip handle
  • Waterproof/Dustproof IP66


Fire Vulcan®
  • High-intensity halogen 8 watt spot bi-pin bulb and two ultra-bright blue LEDs
  • Strobe and Steady Modes
  • Up to 80,000 candela (peak beam intensity) with halogen bulb


    Fire Vulcan® LED
    • C4® LED, impervious to shock with a 50,000 hr lifetime
    • Light Output:
      • High: 80,000 candela peak beam intensity; 145 lumens; 566m beam distance; runs 3 hours
      • Low: 40,000 candela peak beam intensity; 70 lumens; runs 6 hours
    • Deep-dish parabolic reflector produces a tight beam with optimum peripheral illumination to aid in navigation; Optimized electronics provide regulated intensity
    • Ultra-bright blue taillight LEDs make certain you can be seen even in thick smoke
    • 8 programmable switch functions


    Fire Vulcan® Vehicle Mount System
    • High-intensity halogen 8 watt spot bi-pin bulb and two ultra-bright blue LEDs
    • Strobe and Steady Modes
    • Up to 80,000 candela (peak beam intensity) with halogen bulb


      PolyTac®
      • C4® LED technology within a parabolic reflector produces a concentrated beam with optimum peripheral illumination
      • TEN-TAP® Programming with a choice of three operating modes
      • Solid State power regulation provides maximum light output throughout battery life
      • Reflector produces a concentrated beam with optimum peripheral illumination — ideal for law enforcement backup light; day-to-day industrial use; maintaining vehicles; general contracting work


      PolyTac® HP
      • C4® LED technology within a deep reflector provides far-reaching targeting beam with a tight spotlight and optimum peripheral illumination
      • TEN-TAP® Programming with choice of three operating modes:
      • Solid State power regulation provides maximum light output throughout battery life
      • Deep reflector produces 275m beam - ideal for lighting the way to the end of a dark alley, down a wooded path, inspecting utility lines from the ground, or search and rescue missions

      SL


      SL-20L®
      • Deep-dish parabolic reflector produces a tight beam with optimum peripheral illumination
      • C4® LED technology, with a 50,000 hour lifetime
      • Select high, medium, low or strobe modes with multi-function, push-button switch


        SL-20LP®
        • Deep-dish parabolic reflector produces a tight beam with optimum peripheral illumination
        • C4® LED technology, with a 50,000 hour lifetime
        • Select high, medium, low or strobe modes with multi-function, push-button switch


          SL-20X®
          • 10 watt halogen lamp with tungsten filament
          • Up to 38,000 pre-focused Candela (peak beam intensity); 180 lumens
          • Machined aircraft aluminum with anodized finish


            SL-20XP®
            • 8 watt halogen bulb with a 100-hour lifetime
            • Pre-focused halogen beam of up to 25,000 Candela (peak beam intensity); 145 lumens
            • Lightweight, super-tough nylon polymer case with non-slip rubber comfort grip


              Stinger® Lite Pipe
              • Work light system features 8 high-power LEDs that produce a soft, 220 lumen flood pattern to illuminate your entire work area for 3.25 hours
              • Available in a complete system, or if you already have a xenon Stinger, optional Lite Pipe Kit allows you to convert it to a Stinger Lite Pipe
              • Ultra-thin design fits into tight spaces
              • Removable, rotatable hang-hook allows you to use it as a drop light


                UltraStinger®
                • 30-hour life xenon-halogen gas-filled bi-pin bulb
                • Adjustable focus beam
                • Up to 35,000 candela (peak beam intensity); 230 lumens


                  Strion LED HL®
                  • Multi-function On/Off push-button tail switch lets you choose three lighting modes and strobe
                  • Three modes and strobe:
                    - High for a super-bright beam - 500 lumens; 10,000 candela peak beam intensity; 200 meter beam distance; runs 1 hour
                    - Medium for bright light and longer run times – 250 lumens; 5,000 candela peak beam intensity; 141 meter beam distance; runs 2 hours
                    - Low for light without glare and extended run times – 125 lumens; 2,500 candela peak beam intensity; 100 meter beam distance; runs 3.5 hours
                    - Strobe for disorienting or signaling your location; runs 2.5 hours
                  • C4® LED technology, impervious to shock with a 50,000 hour lifetime


                  Vulcan®
                  • High-intensity halogen bi-pin bulb
                  • 8 watt spot provides up to 80,000 candela (peak beam intensity), 150 lumens typical
                  • Up to 3.25 hrs. continuous run time per charge


                    Vulcan® Dual Filament System
                    • Xenon dual filament 8 watt safety bulb delivers instant backup beam
                    • Dual filament 8 watt spot has up to 70,000 candela (peak beam intensity) each, 157 lumens typical
                    • Up to 3.25 hrs. continuous run time per charge


                      Vulcan® Vehicle Mount System
                      • High-intensity halogen bi-pin bulb
                      • 8 watt spot provides up to 80,000 candela (peak beam intensity), 150 lumens typical
                      • Up to 3.25 hrs. continuous run time per charge

                         
                        ; Cache: True
                         Page:  Flush: