Product Selector

19 Results Found

ProTac® Rail Mount 1
  • Click here for Data Sheet
  • Dual fuel - uses one AA alkaline or CR123A lithium battery (both included); also accepts AA lithium
  • Strobe for signaling or disorienting
  • TEN-TAP® Programming - choice of three operating modes: 1.) high/strobe; 2.) high only; 3.) low/high
  • Remote pressure switch features momentary and “constant on” operation
  • Integrated rail clamp attaches to MIL-STD-1913 rails


ProTac® Rail Mount 1
  • Click here for Data Sheet
  • Dual fuel - uses one AA alkaline or CR123A lithium battery (both included); also accepts AA lithium
  • Strobe for signaling or disorienting
  • TEN-TAP® Programming - choice of three operating modes: 1.) high/strobe; 2.) high only; 3.) low/high
  • Remote pressure switch features momentary and “constant on” operation
  • Integrated rail clamp attaches to MIL-STD-1913 rails


TLR-2® G
  • Features C4® LED and a highly visible 510-530nm direct drive green laser with wide operating temperature range
  • C4 LED delivers 12,000 candela peak beam intensity; 300 lumens
  • Textured parabolic reflector produces a concentrated beam with optimum peripheral illumination; green laser provides long-range targeting


Knucklehead® HAZ-LO® – Spot Model
  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Polystinger® LED HAZ-LO®
  • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
  • 3 modes:
    High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
    Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
    Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
  • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


    Survivor®
    • Click here for Data Sheet
    • Available in rechargeable and alkaline models
    • Features C4® LED technology with four lighting modes:
      • High for a super-bright beam that pierces through smoke
      • Low for bright light and longer run time
      • Flash for signaling
      • Moonlight mode provides low-level lighting for battery conservation
    • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
    • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


    Knucklehead® HAZ-LO® – Spot Model
    • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 lighting modes
    • Optimized electronics provide regulated intensity


    Knucklehead® Spot
    • Click here for Data Sheet
    • Shockproof C4® premium LED technology combined with a deep dish parabolic reflector produces a focused beam for longer distances – 210 meters on high beam.
    • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
    • Features a 210 degree articulating head that rotates a full 360 degrees

    SL


    SL-20X®
    • 10 watt halogen lamp with tungsten filament
    • Up to 38,000 pre-focused Candela (peak beam intensity); 180 lumens
    • Machined aircraft aluminum with anodized finish


      SL-20X® LED
      • 10 watt halogen bulb with a 100-hour lifetime
      • Up to 38,000 Candela (peak beam intensity), 200 lumens (typical) from halogen bulb
      • 3 white LEDs with 100,000-hour lifetime provide up to 30 lumens


        SL-20XP®
        • 8 watt halogen bulb with a 100-hour lifetime
        • Pre-focused halogen beam of up to 25,000 Candela (peak beam intensity); 145 lumens
        • Lightweight, super-tough nylon polymer case with non-slip rubber comfort grip


          SL-20XP® LED Power Failure
          • 8 watt halogen bulb with a 100-hour lifetime
          • Pre-focused halogen beam of up to 16,000 Candela (peak beam intensity)
          • 3 white LEDs with 100,000-hour lifetime provide up to 20 lumens; bulb rating is 120 lumens


            PolyStinger DS® LED
            • DUAL SWITCH TECHNOLOGY – Access three lighting modes and strobe via the tail cap or the head-mounted switch. Switches operate independently
            • Three modes and strobe:
              • High for a bright super-bright beam: 26,000 candela peak beam intensity; 385 lumens; runs 2 hours
              • Medium for bright light and longer run times: 13,000 candela peak beam intensity; 195 lumens; runs 3.75 hours
              • Low for when a less intense beam is needed and for extended run times: 6,500 candela peak beam intensity; 95 lumens; runs 7.25 hours
              • Strobe for disorienting or signaling your location; runs 5.5 hours
            • Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination; optimized electronics provides regulated intensity


            PolyStinger® LED
            • Multi-function On/Off push-button switch lets you choose three lighting modes and strobe; designed for extremely long life; tested at 1 million actuations
            • Three modes and strobe:
              • High for a bright super-bright beam: 26,000 candela peak beam intensity; 385 lumens; runs 2 hours
              • Medium for bright light and longer run times: 13,000 candela peak beam intensity; 195 lumens; runs 3.75 hours
              • Low for when a less intense beam is needed and for extended run times: 6,500 candela peak beam intensity; 95 lumens; runs 7.25 hours
              • Strobe for disorienting or signaling your location; runs 5.5 hours
            • Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination; optimized electronics provides regulated intensity


            Polystinger® LED HAZ-LO®
            • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
            • 3 modes:
              High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
              Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
              Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
            • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


              Stinger DS® LED
              • DUAL SWITCH TECHNOLOGY – Access three lighting modes and strobe via the tail cap or the head-mounted switch. Switches operate independently
              • Three modes and strobe:
                - High for a bright super-bright beam - 350 lumens; 24,000 candela peak beam intensity; 310 meter beam distance; runs 2 hours
                - Medium for bright light and longer run times – 175 lumens; 12,000 candela peak beam intensity; 219 meter beam distance; runs 3.75 hours
                - Low for light without glare and extended run times – 85 lumens; 6,000 candela peak beam intensity; 155 meter beam distance; runs 7.25 hours
                - Strobe for disorienting or signaling your location; runs 5.5 hours
              • Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination


                Stinger® LED
                • Multi-function On/Off push-button switch lets you choose three lighting modes and strobe; designed for extremely long life; tested at 1 million actuations
                • Three modes and strobe:
                  - High for a bright super-bright beam - 350 lumens; 24,000 candela peak beam intensity; 310 meter beam distance; runs 2 hours
                  - Medium for bright light and longer run times – 175 lumens; 12,000 candela peak beam intensity; 219 meter beam distance; runs 3.75 hours
                  - Low for light without glare and extended run times – 85 lumens; 6,000 candela peak beam intensity; 155 meter beam distance; runs 7.25 hours
                  - Strobe for disorienting or signaling your location; runs 5.5 hours
                • Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination


                  Strion® DS
                  • Click here for Data Sheet
                  • DUAL SWITCH TECHNOLOGY – Access multiple lighting modes via the push-button tail switch or head-mounted switch. Switches operate independently.
                  • TEN-TAP® programmable switch allows user to select one of three different programs: 1.) high/medium/low with strobe (factory default); 2.) high only without strobe; 3.) high/medium/low without strobe
                  • Three modes and strobe:  High; Medium; Low; Strobe


                  Survivor®
                  • Click here for Data Sheet
                  • Available in rechargeable and alkaline models
                  • Features C4® LED technology with four lighting modes:
                    • High for a super-bright beam that pierces through smoke
                    • Low for bright light and longer run time
                    • Flash for signaling
                    • Moonlight mode provides low-level lighting for battery conservation
                  • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                  • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation

                   
                  ; Cache: True
                   Page:  Flush: