Product Selector

25 Results Found

Stylus Reach® – UL Model
  • High-intensity white LED
  • 140 Candela peak beam intensity, 11 lumens
  • Uses three "AAAA" size alkaline batteries (included)
  • Seven-inch extension cable allows for 14" (35.6cm) of reach
  • Intrinsically safe.


2AA ProPolymer® Xenon
  • Powered by 2 "AA" alkaline batteries
  • Xenon gas-filled bi-pin bulb
  • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


3C ProPolymer® LED
  • Powered by 3 "C" alkaline batteries
  • 10 ultra-bright 100,000-hour life LEDs
  • 85 lumens typical with 10 white LEDs, blue LEDs also available


    3C ProPolymer® Lux Div 1
    • Powered by 3 "C" alkaline batteries
    • Up to 3,500 Candela (peak beam intensity), 44 lumens (typical)
    • Runs up to 4 hrs. at full intensity with 16 additional hrs. of declining usable light


      3C ProPolymer® Xenon
      • Powered by 3 "C" alkaline batteries
      • 785 mA xenon gas-filled module
      • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


        3N ProPolymer® LED
        • Powered by 3 "N" alkaline batteries
        • 3 ultra-bright 100,000-hour life LEDs
        • LEDs provide up to 30 lumens, blue LEDs also available


          4AA ProPolymax®
          • TEN-TAP® programmable switch allows user selection of one of three different programs:
            • high/low/strobe (factory default)
            • high only
            • low/high 
          • C4® LED output:
            • High: 300 lumens; 17,000 candela; runs 2.75 hours
            • Low: 50 lumens; 2,500 candela; runs 24 hours
            • Strobe runs 6 hours
          • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


          4AA ProPolymer® LED
          • Powered by 4 "AA" alkaline batteries
          • 7 ultra-bright 100,000-hour life LEDs
          • 67 lumens typical with 7 white LEDs, blue LEDs also available


            4AA ProPolymer® Lux Div 2
            • C4® LED technology, with a 50,000 hour lifetime.
            • Unbreakable polycarbonate lens with scratch-resistant coating.
            • 100 lumens typical; up to 4,200 candela peak beam intensity.


              4AA ProPolymer® Xenon
              • Powered by 4 "AA" alkaline batteries
              • Features a xenon gas-filled module
              • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                2AA ProPolymer® Xenon
                • Powered by 2 "AA" alkaline batteries
                • Xenon gas-filled bi-pin bulb
                • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


                3C ProPolymer® LED
                • Powered by 3 "C" alkaline batteries
                • 10 ultra-bright 100,000-hour life LEDs
                • 85 lumens typical with 10 white LEDs, blue LEDs also available


                  3C ProPolymer® Lux Div 1
                  • Powered by 3 "C" alkaline batteries
                  • Up to 3,500 Candela (peak beam intensity), 44 lumens (typical)
                  • Runs up to 4 hrs. at full intensity with 16 additional hrs. of declining usable light


                    3C ProPolymer® Xenon
                    • Powered by 3 "C" alkaline batteries
                    • 785 mA xenon gas-filled module
                    • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


                      3N ProPolymer® LED
                      • Powered by 3 "N" alkaline batteries
                      • 3 ultra-bright 100,000-hour life LEDs
                      • LEDs provide up to 30 lumens, blue LEDs also available


                        4AA ProPolymer® LED
                        • Powered by 4 "AA" alkaline batteries
                        • 7 ultra-bright 100,000-hour life LEDs
                        • 67 lumens typical with 7 white LEDs, blue LEDs also available


                          4AA ProPolymer® Xenon
                          • Powered by 4 "AA" alkaline batteries
                          • Features a xenon gas-filled module
                          • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                            Stylus Reach® – UL Model
                            • High-intensity white LED
                            • 140 Candela peak beam intensity, 11 lumens
                            • Uses three "AAAA" size alkaline batteries (included)
                            • Seven-inch extension cable allows for 14" (35.6cm) of reach
                            • Intrinsically safe.


                            2AA ProPolymer® Xenon
                            • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
                            • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
                            • Powered by two "AA" alkaline batteries (included)
                            • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
                            • IP57 rated design; dust and water ingress protected


                            3C ProPolymer® LED
                            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                            • 10 ultra-bright white 100,000-hour life LEDs deliver 54 lumens; runs 336 hours
                            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                            • Waterproof/Dustproof IP65


                            3C ProPolymer® Xenon
                            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
                            • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
                            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                            • Waterproof/Dustproof IP65


                            4AA ProPolymer® LED
                            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                            • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
                            • Powered by four "AA" alkaline batteries (included)
                            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                            • Push-button tail switch for momentary or constant “on”
                            • Waterproof/Dustproof IP65


                            4AA ProPolymer® LUX
                            • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                            • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
                            • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
                            • Uses four "AA" alkaline batteries (included)
                            • IP67; waterproof to 1 meter for 30 minutes


                            4AA ProPolymer® Xenon
                            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
                            • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
                            • Powered by four "AA" alkaline batteries
                            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                            • Push-button tail switch for momentary or constant “on”
                            • Waterproof/Dustproof IP65


                            Survivor® LED (Alkaline Model)
                            • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp)continually preset. It has a maximum adverse surface temperature of <135°C.
                            • Available in rechargeable and alkaline models
                            • Features C4® LED technology with four lighting modes
                            • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
                            • IP54 water-resistant; 2 meter impact resistance tested

                             
                            ; Cache: True
                             Page:  Flush: