Product Selector

15 Results Found

2AA ProPolymer® Xenon
  • Powered by 2 "AA" alkaline batteries
  • Xenon gas-filled bi-pin bulb
  • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


4AA ProPolymer® LED
  • Powered by 4 "AA" alkaline batteries
  • 7 ultra-bright 100,000-hour life LEDs
  • 67 lumens typical with 7 white LEDs, blue LEDs also available


    4AA ProPolymer® Lux Div 1
    • C4® LED technology, with a 50,000 hour lifetime.
    • Unbreakable polycarbonate lens with scratch-resistant coating.
    • 100 lumens typical; up to 4,200 candela peak beam intensity.


      4AA ProPolymer® Xenon
      • Powered by 4 "AA" alkaline batteries
      • Features a xenon gas-filled module
      • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


        2AA ProPolymer® Xenon
        • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
        • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
        • Powered by two "AA" alkaline batteries (included)
        • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
        • IP57 rated design; dust and water ingress protected


        4AA ProPolymer® LED
        • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
        • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
        • Powered by four "AA" alkaline batteries (included)
        • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
        • Push-button tail switch for momentary or constant “on”
        • Waterproof/Dustproof IP65


        4AA ProPolymer® LUX
        • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
        • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
        • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
        • Uses four "AA" alkaline batteries (included)
        • IP67; waterproof to 1 meter for 30 minutes


        4AA ProPolymer® Xenon
        • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
        • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
        • Powered by four "AA" alkaline batteries
        • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
        • Push-button tail switch for momentary or constant “on”
        • Waterproof/Dustproof IP65


        Survivor® LED (Alkaline Model)
        • ATEX-approved for Category 2 (Zone 1) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
        • Available in rechargeable and alkaline models
        • Features C4® LED technology with four lighting modes
        • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
        • IP54 water-resistant; 2 meter impact resistance tested


        2AA ProPolymer® Xenon
        • Powered by 2 "AA" alkaline batteries
        • Xenon gas-filled bi-pin bulb
        • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


        3AA HAZ-LO® LED Headlamp
        • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
        • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
        • Push-button on/off switch easy to use even when wearing heavy gloves
        • Intrinsically safe – Class I, Div 1


          4AA ProPolymer® LED
          • Powered by 4 "AA" alkaline batteries
          • 7 ultra-bright 100,000-hour life LEDs
          • 67 lumens typical with 7 white LEDs, blue LEDs also available


            4AA ProPolymer® Lux Div 1
            • C4® LED technology, with a 50,000 hour lifetime.
            • Unbreakable polycarbonate lens with scratch-resistant coating.
            • 100 lumens typical; up to 4,200 candela peak beam intensity.


              4AA ProPolymer® Xenon
              • Powered by 4 "AA" alkaline batteries
              • Features a xenon gas-filled module
              • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                3AA HAZ-LO® LED Headlamp
                • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
                • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
                • Push-button on/off switch easy to use even when wearing heavy gloves
                • Intrinsically safe – Class I, Div 1

                   
                  ; Cache: True
                   Page:  Flush: