Product Selector

31 Results Found

Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
  • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


2AA ProPolymer® HAZ-LO®
  • C4® LED delivers 65 lumens; 2,300 candela; 96m beam distance; runs 24 hours
  • Powered by 2 "AA" alkaline batteries (included)
  • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
  • Impact-resistant engineering polymer construction


2AA ProPolymer® Xenon
  • Powered by 2 "AA" alkaline batteries
  • Xenon gas-filled bi-pin bulb
  • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


3C ProPolymer® LED
  • Powered by 3 "C" alkaline batteries
  • 10 ultra-bright 100,000-hour life LEDs
  • 85 lumens typical with 10 white LEDs, blue LEDs also available


    3C ProPolymer® Xenon
    • Powered by 3 "C" alkaline batteries
    • 785 mA xenon gas-filled module
    • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


      4AA ProPolymer® LED
      • Powered by 4 "AA" alkaline batteries
      • 7 ultra-bright 100,000-hour life LEDs
      • 67 lumens typical with 7 white LEDs, blue LEDs also available


        4AA ProPolymer® Lux Div 1
        • C4® LED technology, with a 50,000 hour lifetime.
        • Unbreakable polycarbonate lens with scratch-resistant coating.
        • 100 lumens typical; up to 4,200 candela peak beam intensity.


          4AA ProPolymer® Xenon
          • Powered by 4 "AA" alkaline batteries
          • Features a xenon gas-filled module
          • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


            2AA ProPolymer® Xenon
            • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
            • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
            • Powered by two "AA" alkaline batteries (included)
            • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
            • IP57 rated design; dust and water ingress protected


            3C ProPolymer® LED
            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
            • 10 ultra-bright white 100,000-hour life LEDs deliver 54 lumens; runs 336 hours
            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
            • Waterproof/Dustproof IP65


            3C ProPolymer® Xenon
            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
            • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
            • Waterproof/Dustproof IP65


            4AA ProPolymer® LED
            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
            • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
            • Powered by four "AA" alkaline batteries (included)
            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
            • Push-button tail switch for momentary or constant “on”
            • Waterproof/Dustproof IP65


            4AA ProPolymer® LUX
            • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
            • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
            • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
            • Uses four "AA" alkaline batteries (included)
            • IP67; waterproof to 1 meter for 30 minutes


            4AA ProPolymer® Xenon
            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
            • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
            • Powered by four "AA" alkaline batteries
            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
            • Push-button tail switch for momentary or constant “on”
            • Waterproof/Dustproof IP65


            Survivor® LED (Alkaline Model)
            • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp)continually preset. It has a maximum adverse surface temperature of <135°C.
            • Available in rechargeable and alkaline models
            • Features C4® LED technology with four lighting modes
            • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
            • IP54 water-resistant; 2 meter impact resistance tested


            2AA ProPolymer® HAZ-LO®
            • C4® LED delivers 65 lumens; 2,300 candela; 96m beam distance; runs 24 hours
            • Powered by 2 "AA" alkaline batteries (included)
            • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
            • Impact-resistant engineering polymer construction


            2AA ProPolymer® Xenon
            • Powered by 2 "AA" alkaline batteries
            • Xenon gas-filled bi-pin bulb
            • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


            3AA HAZ-LO® LED Headlamp
            • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
            • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
            • Push-button on/off switch easy to use even when wearing heavy gloves
            • Intrinsically safe – Class I, Div 1


              3C ProPolymer® LED
              • Powered by 3 "C" alkaline batteries
              • 10 ultra-bright 100,000-hour life LEDs
              • 85 lumens typical with 10 white LEDs, blue LEDs also available


                3C ProPolymer® Xenon
                • Powered by 3 "C" alkaline batteries
                • 785 mA xenon gas-filled module
                • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


                  4AA ProPolymer® LED
                  • Powered by 4 "AA" alkaline batteries
                  • 7 ultra-bright 100,000-hour life LEDs
                  • 67 lumens typical with 7 white LEDs, blue LEDs also available


                    4AA ProPolymer® Lux Div 1
                    • C4® LED technology, with a 50,000 hour lifetime.
                    • Unbreakable polycarbonate lens with scratch-resistant coating.
                    • 100 lumens typical; up to 4,200 candela peak beam intensity.


                      4AA ProPolymer® Xenon
                      • Powered by 4 "AA" alkaline batteries
                      • Features a xenon gas-filled module
                      • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                        Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
                        • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                        • Features a 210 degree articulating head that rotates a full 360 degrees
                        • 4 lighting modes
                        • Optimized electronics provide regulated intensity


                        Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
                        • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                        • Features a 210 degree articulating head that rotates a full 360 degrees
                        • 4 lighting modes
                        • Optimized electronics provide regulated intensity


                        3AA HAZ-LO® LED Headlamp
                        • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
                        • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
                        • Push-button on/off switch easy to use even when wearing heavy gloves
                        • Intrinsically safe – Class I, Div 1


                          Knucklehead® HAZ-LO® – Flood Model
                          • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                          • Features a 210 degree articulating head that rotates a full 360 degrees
                          • 4 lighting modes
                          • Optimized electronics provide regulated intensity


                          Knucklehead® HAZ-LO® – Spot Model
                          • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                          • Features a 210 degree articulating head that rotates a full 360 degrees
                          • 4 lighting modes
                          • Optimized electronics provide regulated intensity


                          Knucklehead® HAZ-LO® – Flood Model
                          • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                          • Features a 210 degree articulating head that rotates a full 360 degrees
                          • 4 lighting modes
                          • Optimized electronics provide regulated intensity


                          Knucklehead® HAZ-LO® – Spot Model
                          • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                          • Features a 210 degree articulating head that rotates a full 360 degrees
                          • 4 lighting modes
                          • Optimized electronics provide regulated intensity

                           
                          ; Cache: True
                           Page:  Flush: