Product Selector

47 Results Found

Survivor® (Alkaline Model)
  • Click here for Data Sheet
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes:
    • High for a super-bright beam that pierces through smoke
    • Low for bright light and longer run time
    • Flash for signaling
    • Moonlight mode provides low-level lighting for battery conservation
  • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
  • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


Knucklehead® (Alkaline Model)
  • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
  • Shockproof dual C4® premium LED technology delivers 200 lumens
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 modes:
    High – 1150 candela peak beam intensity, 200 Lumens, 3.5 hour runtime
    Low – 350 candela peak beam intensity, 63 lumens, 16 hour runtime
    Moonlight – 20 day runtime
    Flash – 8 hour runtime


    Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
    • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 lighting modes
    • Optimized electronics provide regulated intensity


    Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
    • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 lighting modes
    • Optimized electronics provide regulated intensity


    PolyTac 90®
    • C4® LED technology, with a 50,000 hour lifetime.
    • Glass lens, gasket sealed.
    • 3 modes:
      High – 7000 candela peak beam intensity, 170 Lumens, 3.75 hours runtime
      Low – 700 candela peak beam intensity, 17 Lumens, 30 hours runtime
      Strobe – 6 hours runtime


      2AA ProPolymer® HAZ-LO®
      • C4® LED delivers 65 lumens; 2,300 candela; 96m beam distance; runs 24 hours
      • Powered by 2 "AA" alkaline batteries (included)
      • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
      • Impact-resistant engineering polymer construction


      3AA ProPolymer® Dualie®
      • INTRINSICALLY SAFE
      • Click here for Data Sheet
      • Features two C4® LEDs and three lighting modes: spot, flood, spot and flood simultaneously
      • Beams intersect for optimum path illumination and no blind spots
      • Dual head switches on either side of the body for easy beam selection and one-handed operation
      • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


      3AA ProPolymer® Dualie® Laser
      • INTRINSICALLY SAFE
      • Dualie Laser model features one C4® LED and a 640nm - 650nm red laser and three lighting modes: spot, laser, spot and laser simultaneously
      • Dual head switches on either side of the body for easy beam selection and one-handed operation
      • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


      3C ProPolymer® HAZ-LO®
      • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


      4AA ProPolymax®
      • TEN-TAP® programmable switch allows user selection of one of three different programs:
        • high/low/strobe (factory default)
        • high only
        • low/high 
      • C4® LED output:
        • High: 300 lumens; 17,000 candela; runs 2.75 hours
        • Low: 50 lumens; 2,500 candela; runs 24 hours
        • Strobe runs 6 hours
      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


      2AA ProPolymer® HAZ-LO®
      • C4® LED delivers 65 lumens; 2,300 candela; 96m beam distance; runs 24 hours
      • Powered by 2 "AA" alkaline batteries (included)
      • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
      • Impact-resistant engineering polymer construction


      3AA ProPolymer® Dualie®
      • INTRINSICALLY SAFE
      • Click here for Data Sheet
      • Features two C4® LEDs and three lighting modes: spot, flood, spot and flood simultaneously
      • Beams intersect for optimum path illumination and no blind spots
      • Dual head switches on either side of the body for easy beam selection and one-handed operation
      • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


      3AA ProPolymer® Dualie® Laser
      • INTRINSICALLY SAFE
      • Dualie Laser model features one C4® LED and a 640nm - 650nm red laser and three lighting modes: spot, laser, spot and laser simultaneously
      • Dual head switches on either side of the body for easy beam selection and one-handed operation
      • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


      3C ProPolymer® HAZ-LO®
      • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


      Argo® HAZ-LO® Headlamp
      • Meets lighting needs to illuminate objects at a distance
      • Features one white C4® LED with low and high output modes
      • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


      Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
      • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
      • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      Survivor® (Alkaline Model)
      • Click here for Data Sheet
      • Available in rechargeable and alkaline models
      • Features C4® LED technology with four lighting modes:
        • High for a super-bright beam that pierces through smoke
        • Low for bright light and longer run time
        • Flash for signaling
        • Moonlight mode provides low-level lighting for battery conservation
      • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
      • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


      Trident® HAZ-LO® Headlamp
      • Meets lighting needs for both close-up and distance work
      • Features center C4® LED and three ultra-bright white 5mm LEDs with low and high output modes
      • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


      Argo® HAZ-LO® Headlamp
      • Meets lighting needs to illuminate objects at a distance
      • Features one white C4® LED with low and high output modes
      • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


      Argo® Headlamp
      • Meets lighting needs to illuminate objects at a distance
      • Features one white C4® LED with three output modes:
        • High for maximum output with a long-range beam distance: 150 lumens, 9,250 candela peak beam intensity, 3 hour run time, 190m beam distance
        • Medium for intense brightness and longer run time: 100 lumens, 6,375 candela peak beam intensity, 4.5 hour run time, 160m beam distance
        • Low for extended run times and when less intense light is needed: 45 lumens, 2,750 peak beam intensity, 30 hour run time, 103m beam distance
      • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


      Double Clutch™ USB Headlamp
      • C4® LED with spot and flood beams – both with high and low modes; remembers the last mode used when you turn it back on
      • Spot beam for some distance lighting
      • Flood beam for work at arm’s length
      • Facecap twists for easy functionality, even with gloves
      • Dual-fuel: Powered by USB rechargeable lithium polymer battery; also accepts 3 AAA alkaline or lithium batteries as back-up
      • Lithium polymer battery features charge status indicator


      Trident® HAZ-LO® Headlamp
      • Meets lighting needs for both close-up and distance work
      • Features center C4® LED and three ultra-bright white 5mm LEDs with low and high output modes
      • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


      3C ProPolymer® HAZ-LO®
      • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


      Argo® HAZ-LO® Headlamp
      • ATEX and IECEx-rated for Category 1G (Zone 0) explosive gas group IIA locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is continually present. It has a maximum adverse surface temperature of 135°C.
      • ATEX and IECEx-rated for Category 2G (Zone 1) explosive gas group IIA locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of 135°C.
      • Meets lighting needs to illuminate objects at a distance
      • Features one white C4® LED with two output modes — Low and High
      • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation
      • 90º tilting head features a robust ratcheting system; prevents neck fatigue


      Trident® HAZ-LO® Headlamp
      • ATEX and IECEx-rated for Category 1G (Zone 0) explosive gas group IIA locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is continually present. It has a maximum adverse surface temperature of 135°C
      • ATEX and IECEx-rated for Category 2G (Zone 1) explosive gas group IIB locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of 135°C
      • Meets lighting needs for both close-up and distance work
      • Features center C4® LED and three ultra-bright white 5mm LEDs with two output modes
      • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation
      • 90º tilting head features a robust ratcheting system; prevents neck fatigue
      • IPX4 rated for water resistance; 2 meter impact resistance tested


      E-Flood® FireBox®
      • Six (6) C4® LEDs, impervious to shock with a 50,000 hour lifetime
      • Toggle switch and two (2) user programmable ultra bright blue tail-light LEDs
      • 6 wide pattern parabolic reflectors produce a smooth flood pattern
      • Jumper selectable high or low setting to allow higher light output or longer run time


        E-Flood® FireBox® Vehicle Mount System
        • Six (6) C4® LEDs, impervious to shock with a 50,000 hour lifetime
        • Toggle switch and two (2) user programmable ultra bright blue tail-light LEDs
        • 6 wide pattern parabolic reflectors produce a smooth flood pattern
        • Jumper selectable high or low setting to allow higher light output or longer run time


          E-Spot® FireBox®
          • 3 C4® LEDs and deep dish parabolic reflectors to produce a large spot pattern
          • Dual rear LEDs ensure you can be seen whether you are coming or going
          • 2 levels of lighting:
            High – 55,000 candela peak beam intensity; 540 lumens
            Low – 32,000 candela peak beam intensity; 330 lumens
          • The Standard System includes both AC and DC charger cords, a charge rack and shoulder strap


            E-Spot® FireBox® Vehicle Mount System
            • 3 C4® LEDs and deep dish parabolic reflectors to produce a large spot pattern
            • Dual rear LEDs ensure you can be seen whether you are coming or going
            • 2 levels of lighting:
              High – 55,000 candela peak beam intensity; 540 lumens
              Low – 32,000 candela peak beam intensity; 330 lumens
            • The Vehicle Mount System includes a vehicle-mountable hard-wire rack and shoulder carrying strap


              Knucklehead® HAZ-LO® – Flood Model
              • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
              • Features a 210 degree articulating head that rotates a full 360 degrees
              • 4 lighting modes
              • Optimized electronics provide regulated intensity


              Knucklehead® HAZ-LO® – Spot Model
              • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
              • Features a 210 degree articulating head that rotates a full 360 degrees
              • 4 lighting modes
              • Optimized electronics provide regulated intensity


              Polystinger® LED HAZ-LO®
              • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
              • 3 modes:
                High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
                Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
                Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
              • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


                Survivor®
                • Click here for Data Sheet
                • Available in rechargeable and alkaline models
                • Features C4® LED technology with four lighting modes:
                  • High for a super-bright beam that pierces through smoke
                  • Low for bright light and longer run time
                  • Flash for signaling
                  • Moonlight mode provides low-level lighting for battery conservation
                • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


                Knucklehead®
                • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
                • Shockproof dual C4® premium LED technology delivers 200 lumens
                • Features a 210 degree articulating head that rotates a full 360 degrees
                • 4 modes:
                  High – 1150 candela peak beam intensity, 200 Lumens, 3.5 hour runtime
                  Low – 350 candela peak beam intensity, 63 lumens, 16 hour runtime
                  Moonlight – 20 day runtime
                  Flash – 8 hour runtime


                  Knucklehead® HAZ-LO® – Flood Model
                  • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                  • Features a 210 degree articulating head that rotates a full 360 degrees
                  • 4 lighting modes
                  • Optimized electronics provide regulated intensity


                  Knucklehead® HAZ-LO® – Spot Model
                  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                  • Features a 210 degree articulating head that rotates a full 360 degrees
                  • 4 lighting modes
                  • Optimized electronics provide regulated intensity


                  E-Flood® LiteBox®
                  • Six (6) C4® LEDs, impervious to shock with a 50,000 hour lifetime
                  • 6 wide pattern parabolic reflectors produce a smooth flood pattern
                  • Optimized electronics provide regulated intensity
                  • Jumper selectable high or low setting to allow higher light output or longer run time


                    E-Flood® LiteBox® Vehicle Mount System
                    • Six (6) C4® LEDs, impervious to shock with a 50,000 hour lifetime
                    • 6 wide pattern parabolic reflectors produce a smooth flood pattern
                    • Optimized electronics provide regulated intensity
                    • Jumper selectable high or low setting to allow higher light output or longer run time


                      E-Spot® LiteBox®
                      • 3 C4® LEDs and deep dish parabolic reflectors to produce a large spot pattern
                      • 2 levels of lighting:
                        High – 55,000 candela peak beam intensity; 540 lumens
                        Low – 32,000 candela peak beam intensity; 330 lumens
                      • Runtime:
                        High – 7 hours to the 10% output level
                        Low – 15 hours to the 10% output level


                        E-Spot® LiteBox® Vehicle Mount System
                        • 3 C4® LEDs and deep dish parabolic reflectors to produce a large spot pattern
                        • 2 levels of lighting:
                          High – 55,000 candela peak beam intensity; 540 lumens
                          Low – 32,000 candela peak beam intensity; 330 lumens
                        • The Vehicle Mount System includes a vehicle-mountable hard-wire rack and shoulder carrying strap


                          PolyTac 90®
                          • C4® LED technology, with a 50,000 hour lifetime.
                          • Glass lens, gasket sealed.
                          • 3 modes:
                            High – 7000 candela peak beam intensity, 170 Lumens, 3.75 hours runtime
                            Low – 700 candela peak beam intensity, 17 Lumens, 30 hours runtime
                            Strobe – 6 hours runtime


                            Portable Scene Light
                            • Click here for Data Sheet
                            • Six C4® LED and wide reflectors produce a uniform flood pattern
                            • Three user-selectable outputs: High; Medium; and Low
                            • Selectable diffuser settings for two beam widths
                            • Optimum peripheral illumination for scene lighting; 90° swivel neck allows you to aim the beam where you need it for task lighting


                            Siege® AA with Magnetic Base
                            • Click here for Data Sheet
                            • Multiple modes: White LED (Low, Medium, High) and Red LED (Flash SOS and Red LED High)
                            • Polycarbonate glare-reducing cover provides soft, even 360° light distribution; comfortable to use in close quarters without impairing vision; cover is removable to illuminate large areas
                            • “Stick” it to steel surfaces for hands-free use
                            • Stand it upright or hang it with D-ring on base of lantern to use as an overhead light
                            • Incorporated D-ring on bottom of lantern is spring-loaded to stow against the light, out of the way when not in use


                            Polystinger® LED HAZ-LO®
                            • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
                            • 3 modes:
                              High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
                              Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
                              Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
                            • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


                              Survivor®
                              • Click here for Data Sheet
                              • Available in rechargeable and alkaline models
                              • Features C4® LED technology with four lighting modes:
                                • High for a super-bright beam that pierces through smoke
                                • Low for bright light and longer run time
                                • Flash for signaling
                                • Moonlight mode provides low-level lighting for battery conservation
                              • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                              • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


                              Double Clutch™ USB Headlamp
                              • C4® LED with spot and flood beams – both with high and low modes; remembers the last mode used when you turn it back on
                              • Spot beam for some distance lighting
                              • Flood beam for work at arm’s length
                              • Facecap twists for easy functionality, even with gloves
                              • Dual-fuel: Powered by USB rechargeable lithium polymer battery; also accepts 3 AAA alkaline or lithium batteries as back-up
                              • Lithium polymer battery features charge status indicator

                               
                              ; Cache: True
                               Page:  Flush: