Product Selector

19 Results Found

3AA ProPolymer® HAZ-LO®
  • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
  • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
  • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
  • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


    2AA ProPolymer® LED
    • ATEX-approved for Category 3 (Zone 2) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum operating temperature of <100°C.
    • .5w super-bright, high-flux 30,000-hour life LED delivers 20 lumens; 2,300 candela; runs 20 hours
    • Powered by two "AA" alkaline batteries (included)
    • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
    • IP57 rated design; dust and water ingress protected


    2AA ProPolymer® Xenon
    • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
    • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
    • Powered by two "AA" alkaline batteries (included)
    • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
    • IP57 rated design; dust and water ingress protected


    3AA ProPolymer® HAZ-LO®
    • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
    • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
    • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
    • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


      3C ProPolymer® HAZ-LO®
      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


      3C ProPolymer® LED
      • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
      • 10 ultra-bright white 100,000-hour life LEDs deliver 54 lumens; runs 336 hours
      • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
      • Waterproof/Dustproof IP65


      3C ProPolymer® Xenon
      • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
      • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
      • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
      • Waterproof/Dustproof IP65


      3N ProPolymer® LED
      • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <135°C.
      • 3 ultra-bright white 100,000-hour life LEDs deliver 30 lumens; runs 120 hours
      • Powered by three "N" alkaline batteries (included)
      • Anti-static, impact-resistant polymer construction


      4AA ProPolymer® LUX
      • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
      • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
      • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
      • Uses four "AA" alkaline batteries (included)
      • IP67; waterproof to 1 meter for 30 minutes


      4AA ProPolymer® Xenon
      • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
      • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
      • Powered by four "AA" alkaline batteries
      • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
      • Push-button tail switch for momentary or constant “on”
      • Waterproof/Dustproof IP65


      Survivor® LED (Alkaline Model)
      • ATEX-approved for Category 2 (Zone 1) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
      • Available in rechargeable and alkaline models
      • Features C4® LED technology with four lighting modes
      • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
      • IP54 water-resistant; 2 meter impact resistance tested


      3AA ProPolymer® HAZ-LO®
      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


        Fire Vulcan®
        • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <135°C Gas, 53°C Dust.
        • Features high-intensity xenon bi-pin bulb and two ultra-bright blue taillight LEDs
        • Xenon bulb delivers 50 lumens; 31,000 candela
        • Strobe and Steady Modes
        • 6V 4.5 amp-hour rechargeable battery can be recharged up to 500 times
        • Waterproof/Dustproof IP66


        Fire Vulcan® LED
        • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <120°C Gas, 65°C Dust.
        • Features C4® LED, impervious to shock with a 50,000 hr lifetime and two ultra-bright blue taillight LEDs
        • 2 levels of light output
        • Deep-dish parabolic reflector produces a tight beam with optimum peripheral illumination to aid in navigation; Optimized electronics provide regulated intensity
        • Two lightweight lithium ion nanotechnology cells; recharges in 5 hrs
        • 8 programmable switch functions
        • Waterproof/Dustproof IP66


        Fire Vulcan® Vehicle Mount System
        • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <135°C Gas, 53°C Dust.
        • Features high-intensity xenon bi-pin bulb and two ultra-bright blue taillight LEDs
        • Xenon bulb delivers 50 lumens; 31,000 candela
        • Strobe and Steady Modes
        • 6V 4.5 amp-hour rechargeable battery can be recharged up to 500 times
        • Waterproof/Dustproof IP66


        Survivor® LED
        • ATEX-approved for Category 2 (Zone 1) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
        • Available in rechargeable and alkaline models
        • Features C4® LED technology with four lighting modes
        • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications.
        • Industrial rechargeable NiCd battery can be recharged up to 1,000 times. Also accepts four "AA" alkaline non-rechargeable batteries for fast replacement with readily available batterie
        • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
        • IP54 water-resistant; 2 meter impact resistance tested


        Vulcan®
        • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <135°C Gas, 53°C Dust.
        • High-intensity 3 watt spot xenon bulb provides 50 lumens; 31,000 candela; runs 13 hours
        • Zero-maintenance 4.5 amp-hour sealed lead acid battery is rechargeable up to 500 times
        • Features a three-position toggle switch for easy use with gloves
        • High-impact ABS thermoplastic housing with rubberized cushioned grip handle
        • Waterproof/Dustproof IP66


        Vulcan® Dual Filament System
        • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <450°C Gas, 62°C Dust.
        • Xenon dual filament 8 watt safety bulb delivers instant backup beam has up to 157 lumens,, 70,000 candela each; runs 3.25 hours
        • Zero-maintenance 4.5 amp-hour sealed lead acid battery is rechargeable up to 500 times
        • Features a three-position toggle switch for easy use with gloves
        • High-impact ABS thermoplastic housing with rubberized cushioned grip handle
        • Waterproof/Dustproof IP66


        Vulcan® Vehicle Mount System
        • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <135°C Gas, 53°C Dust.
        • High-intensity 3 watt spot xenon bulb or 8 watt spot xenon dual filament safety bulb that delivers instant backup beam
          • 3 watt spot provides 50 lumens; 31,000 candela; runs 13 hours
          • Each Dual filament 8 watt spot provides 157 lumens; 70,000 candela each; runs 3.25 hours
        • Features a three-position toggle switch for easy use with gloves
        • Zero-maintenance 4.5 amp-hour sealed lead acid battery is rechargeable up to 500 times
        • High-impact ABS thermoplastic housing with rubberized cushioned grip handle
        • Waterproof/Dustproof IP66

         
        ; Cache: True
         Page:  Flush: