Product Selector

12 Results Found

2AA ProPolymer® Xenon
  • Powered by 2 "AA" alkaline batteries
  • Xenon gas-filled bi-pin bulb
  • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


3C ProPolymer® Lux Div 1
  • Powered by 3 "C" alkaline batteries
  • Up to 3,500 Candela (peak beam intensity), 44 lumens (typical)
  • Runs up to 4 hrs. at full intensity with 16 additional hrs. of declining usable light


    4AA ProPolymer® Lux Div 2
    • C4® LED technology, with a 50,000 hour lifetime.
    • Unbreakable polycarbonate lens with scratch-resistant coating.
    • 100 lumens typical; up to 4,200 candela peak beam intensity.


      4AA ProPolymer® Xenon
      • Powered by 4 "AA" alkaline batteries
      • Features a xenon gas-filled module
      • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


        2AA ProPolymer® Xenon
        • Powered by 2 "AA" alkaline batteries
        • Xenon gas-filled bi-pin bulb
        • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


        3C ProPolymer® Lux Div 1
        • Powered by 3 "C" alkaline batteries
        • Up to 3,500 Candela (peak beam intensity), 44 lumens (typical)
        • Runs up to 4 hrs. at full intensity with 16 additional hrs. of declining usable light


          4AA ProPolymer® Xenon
          • Powered by 4 "AA" alkaline batteries
          • Features a xenon gas-filled module
          • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


            2AA ProPolymer® Xenon
            • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
            • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
            • Powered by two "AA" alkaline batteries (included)
            • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
            • IP57 rated design; dust and water ingress protected


            4AA ProPolymer® Xenon
            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
            • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
            • Powered by four "AA" alkaline batteries
            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
            • Push-button tail switch for momentary or constant “on”
            • Waterproof/Dustproof IP65


            Fire Vulcan® LED
            • C4® LED, impervious to shock with a 50,000 hr lifetime
            • Light Output:
              • High: 80,000 candela peak beam intensity; 145 lumens; 566m beam distance; runs 3 hours
              • Low: 40,000 candela peak beam intensity; 70 lumens; runs 6 hours
            • Deep-dish parabolic reflector produces a tight beam with optimum peripheral illumination to aid in navigation; Optimized electronics provide regulated intensity
            • Ultra-bright blue taillight LEDs make certain you can be seen even in thick smoke
            • 8 programmable switch functions


            PolyStinger®
            • Xenon gas-filled bi-pin bulb with 30-hour life; spare bulb in tailcap
            • Adjustable focus beam
            • Up to 11,000 candela (peak beam intensity); 90 lumens


              Stinger®
              • Xenon gas-filled bi-pin bulb; spare bulb in tailcap
              • Adjustable focus beam
              • Up to 11,000 candela (peak beam intensity); 90 lumens

                 
                ; Cache: True
                 Page:  Flush: