Product Selector

19 Results Found

Survivor® (Alkaline Model)
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes:
    • High for a super-bright beam that pierces through smoke
    • Low for bright light and longer run time
    • Flash for signaling
    • Moonlight mode provides low-level lighting for battery conservation
  • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
  • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


3C ProPolymer® Xenon
  • Powered by 3 "C" alkaline batteries
  • 785 mA xenon gas-filled module
  • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


    4AA ProPolymax®
    • TEN-TAP® programmable switch allows user selection of one of three different programs:
      • high/low/strobe (factory default)
      • high only
      • low/high 
    • C4® LED output:
      • High: 300 lumens; 17,000 candela; runs 2.75 hours
      • Low: 50 lumens; 2,500 candela; runs 24 hours
      • Strobe runs 6 hours
    • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


    4AA ProPolymer® Xenon
    • Powered by 4 "AA" alkaline batteries
    • Features a xenon gas-filled module
    • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


      3C ProPolymer® Xenon
      • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
      • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
      • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
      • Waterproof/Dustproof IP65


      4AA ProPolymer® Xenon
      • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
      • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
      • Powered by four "AA" alkaline batteries
      • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
      • Push-button tail switch for momentary or constant “on”
      • Waterproof/Dustproof IP65


      3C ProPolymer® Xenon
      • Powered by 3 "C" alkaline batteries
      • 785 mA xenon gas-filled module
      • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


        4AA ProPolymer® Xenon
        • Powered by 4 "AA" alkaline batteries
        • Features a xenon gas-filled module
        • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


          Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
          • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
          • Features a 210 degree articulating head that rotates a full 360 degrees
          • 4 lighting modes
          • Optimized electronics provide regulated intensity


          Survivor® (Alkaline Model)
          • Available in rechargeable and alkaline models
          • Features C4® LED technology with four lighting modes:
            • High for a super-bright beam that pierces through smoke
            • Low for bright light and longer run time
            • Flash for signaling
            • Moonlight mode provides low-level lighting for battery conservation
          • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
          • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


          Knucklehead® HAZ-LO® – Spot Model
          • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
          • Features a 210 degree articulating head that rotates a full 360 degrees
          • 4 lighting modes
          • Optimized electronics provide regulated intensity


          Polystinger® LED HAZ-LO®
          • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
          • 3 modes:
            High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
            Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
            Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
          • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


            Survivor®
            • Available in rechargeable and alkaline models
            • Features C4® LED technology with four lighting modes:
              • High for a super-bright beam that pierces through smoke
              • Low for bright light and longer run time
              • Flash for signaling
              • Moonlight mode provides low-level lighting for battery conservation
            • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
            • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


            Knucklehead® HAZ-LO® – Spot Model
            • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
            • Features a 210 degree articulating head that rotates a full 360 degrees
            • 4 lighting modes
            • Optimized electronics provide regulated intensity


            PolyStinger®
            • Xenon gas-filled bi-pin bulb with 30-hour life; spare bulb in tailcap
            • Adjustable focus beam
            • Up to 11,000 candela (peak beam intensity); 90 lumens


              Polystinger® LED HAZ-LO®
              • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
              • 3 modes:
                High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
                Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
                Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
              • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


                Stinger®
                • Xenon gas-filled bi-pin bulb; spare bulb in tailcap
                • Adjustable focus beam
                • Up to 11,000 candela (peak beam intensity); 90 lumens


                  Survivor®
                  • Available in rechargeable and alkaline models
                  • Features C4® LED technology with four lighting modes:
                    • High for a super-bright beam that pierces through smoke
                    • Low for bright light and longer run time
                    • Flash for signaling
                    • Moonlight mode provides low-level lighting for battery conservation
                  • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                  • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation

                   
                  ; Cache: True
                   Page:  Flush: