Product Selector

24 Results Found

Stylus® – UL Model
  • Body available in Black
  • High-intensity 100,000 hour LED available in Artic White
  • Light Output: 140 candela peak beam intensity, 24m beam distance and 11 lumens measured system output.


    Survivor® (Alkaline Model)
    • Click here for Data Sheet
    • Available in rechargeable and alkaline models
    • Features C4® LED technology with four lighting modes:
      • High for a super-bright beam that pierces through smoke
      • Low for bright light and longer run time
      • Flash for signaling
      • Moonlight mode provides low-level lighting for battery conservation
    • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
    • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


    Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
    • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 lighting modes
    • Optimized electronics provide regulated intensity


    Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
    • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 lighting modes
    • Optimized electronics provide regulated intensity


    3AA ProPolymer® Dualie®
    • INTRINSICALLY SAFE
    • Click here for Data Sheet
    • Features two C4® LEDs and three lighting modes: spot, flood, spot and flood simultaneously
    • Beams intersect for optimum path illumination and no blind spots
    • Dual head switches on either side of the body for easy beam selection and one-handed operation
    • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


    3AA ProPolymer® Dualie® Laser
    • INTRINSICALLY SAFE
    • Dualie Laser model features one C4® LED and a 640nm - 650nm red laser and three lighting modes: spot, laser, spot and laser simultaneously
    • Dual head switches on either side of the body for easy beam selection and one-handed operation
    • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


    3C ProPolymer® HAZ-LO®
    • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
    • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
    • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
    • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
    • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


    3AA ProPolymer® Dualie®
    • INTRINSICALLY SAFE
    • Click here for Data Sheet
    • Features two C4® LEDs and three lighting modes: spot, flood, spot and flood simultaneously
    • Beams intersect for optimum path illumination and no blind spots
    • Dual head switches on either side of the body for easy beam selection and one-handed operation
    • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


    3AA ProPolymer® Dualie® Laser
    • INTRINSICALLY SAFE
    • Dualie Laser model features one C4® LED and a 640nm - 650nm red laser and three lighting modes: spot, laser, spot and laser simultaneously
    • Dual head switches on either side of the body for easy beam selection and one-handed operation
    • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


    3C ProPolymer® HAZ-LO®
    • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
    • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
    • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
    • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
    • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


    Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
    • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 lighting modes
    • Optimized electronics provide regulated intensity


    Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
    • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 lighting modes
    • Optimized electronics provide regulated intensity


    Stylus® – UL Model
    • Body available in Black
    • High-intensity 100,000 hour LED available in Artic White
    • Light Output: 140 candela peak beam intensity, 24m beam distance and 11 lumens measured system output.


      Survivor® (Alkaline Model)
      • Click here for Data Sheet
      • Available in rechargeable and alkaline models
      • Features C4® LED technology with four lighting modes:
        • High for a super-bright beam that pierces through smoke
        • Low for bright light and longer run time
        • Flash for signaling
        • Moonlight mode provides low-level lighting for battery conservation
      • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
      • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


      3AA ProPolymer® HAZ-LO® 7 LED
      • Rated for Zone 0 locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum surface temperature of <135°C
      • A cluster of seven 5mm LEDs provide a soft, wide beam for tasks at arm’s length and other up-close task lighting
      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
      • "Captured locking" set screw will not back out - prevents FOD (Foreign Object Debris)
      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment


      3C ProPolymer® HAZ-LO®
      • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


      Knucklehead® HAZ-LO® – Flood Model
      • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      Knucklehead® HAZ-LO® – Spot Model
      • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      Polystinger® LED HAZ-LO®
      • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
      • 3 modes:
        High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
        Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
        Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
      • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


        Survivor®
        • Click here for Data Sheet
        • Available in rechargeable and alkaline models
        • Features C4® LED technology with four lighting modes:
          • High for a super-bright beam that pierces through smoke
          • Low for bright light and longer run time
          • Flash for signaling
          • Moonlight mode provides low-level lighting for battery conservation
        • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
        • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


        Knucklehead® HAZ-LO® – Flood Model
        • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
        • Features a 210 degree articulating head that rotates a full 360 degrees
        • 4 lighting modes
        • Optimized electronics provide regulated intensity


        Knucklehead® HAZ-LO® – Spot Model
        • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
        • Features a 210 degree articulating head that rotates a full 360 degrees
        • 4 lighting modes
        • Optimized electronics provide regulated intensity


        Polystinger® LED HAZ-LO®
        • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
        • 3 modes:
          High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
          Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
          Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
        • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


          Survivor®
          • Click here for Data Sheet
          • Available in rechargeable and alkaline models
          • Features C4® LED technology with four lighting modes:
            • High for a super-bright beam that pierces through smoke
            • Low for bright light and longer run time
            • Flash for signaling
            • Moonlight mode provides low-level lighting for battery conservation
          • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
          • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation

           
          ; Cache: True
           Page:  Flush: