Product Selector

35 Results Found

Stylus Reach® 18"
  • High-intensity white LED, with a 100,000 hour lifetime.
  • 140 Candela peak beam intensity, 11 lumens typical.
  • 24 continuous hours runtime to the 10% lumen output level.
  • Cable allows for 25.5" of reach.


    Stylus® – UL Model
    • Body available in Black
    • High-intensity 100,000 hour LED available in Artic White
    • Light Output: 140 candela peak beam intensity, 24m beam distance and 11 lumens measured system output.


      Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
      • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
      • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
      • Kit includes:
        • 3AA ProPolymer® HAZ-LO® with alkaline batteries
        • Streamlight Helmet Mount
        • Rubber Helmet Strap


      2AA ProPolymer® Xenon
      • Powered by 2 "AA" alkaline batteries
      • Xenon gas-filled bi-pin bulb
      • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


      3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
      • Kit includes:
        • 3AA ProPolymer® HAZ-LO® with alkaline batteries
        • Streamlight Helmet Mount
        • Rubber Helmet Strap


      3C ProPolymer® LED
      • Powered by 3 "C" alkaline batteries
      • 10 ultra-bright 100,000-hour life LEDs
      • 85 lumens typical with 10 white LEDs, blue LEDs also available


        3C ProPolymer® Xenon
        • Powered by 3 "C" alkaline batteries
        • 785 mA xenon gas-filled module
        • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


          3N ProPolymer® LED
          • Powered by 3 "N" alkaline batteries
          • 3 ultra-bright 100,000-hour life LEDs
          • LEDs provide up to 30 lumens, blue LEDs also available


            4AA ProPolymer® Lux Div 1
            • C4® LED technology, with a 50,000 hour lifetime.
            • Unbreakable polycarbonate lens with scratch-resistant coating.
            • 100 lumens typical; up to 4,200 candela peak beam intensity.


              4AA ProPolymer® Xenon
              • Powered by 4 "AA" alkaline batteries
              • Features a xenon gas-filled module
              • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                2AA ProPolymer® Xenon
                • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
                • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
                • Powered by two "AA" alkaline batteries (included)
                • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
                • IP57 rated design; dust and water ingress protected


                3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                • Kit includes:
                  • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                  • Streamlight Helmet Mount
                  • Rubber Helmet Strap


                3C ProPolymer® LED
                • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                • 10 ultra-bright white 100,000-hour life LEDs deliver 54 lumens; runs 336 hours
                • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                • Waterproof/Dustproof IP65


                3C ProPolymer® Xenon
                • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
                • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
                • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                • Waterproof/Dustproof IP65


                3N ProPolymer® LED
                • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <135°C.
                • 3 ultra-bright white 100,000-hour life LEDs deliver 30 lumens; runs 120 hours
                • Powered by three "N" alkaline batteries (included)
                • Anti-static, impact-resistant polymer construction


                4AA ProPolymer® LED
                • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
                • Powered by four "AA" alkaline batteries (included)
                • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                • Push-button tail switch for momentary or constant “on”
                • Waterproof/Dustproof IP65


                4AA ProPolymer® LUX
                • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
                • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
                • Uses four "AA" alkaline batteries (included)
                • IP67; waterproof to 1 meter for 30 minutes


                4AA ProPolymer® Xenon
                • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
                • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
                • Powered by four "AA" alkaline batteries
                • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                • Push-button tail switch for momentary or constant “on”
                • Waterproof/Dustproof IP65


                Stylus Reach®
                • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for long periods. It has a maximum adverse surface temperature of <300°C.
                • Features a 17.78 cm extension cable that allows for 35.6 cm of reach so you can illuminate those hard-to-reach areas
                • High-intensity 100,000 hour white LED delivers 10 lumens; 140 candela peak beam intensity, 24m beam distance; runs 24 hours
                • Uses three "AAAA" alkaline batteries (included)
                • Features a momentary blink switch and constant on
                • Durable anodized aluminum construction; available in black
                • IPX4 water-resistant


                2AA ProPolymer® Xenon
                • Powered by 2 "AA" alkaline batteries
                • Xenon gas-filled bi-pin bulb
                • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


                3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                • Kit includes:
                  • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                  • Streamlight Helmet Mount
                  • Rubber Helmet Strap


                3C ProPolymer® LED
                • Powered by 3 "C" alkaline batteries
                • 10 ultra-bright 100,000-hour life LEDs
                • 85 lumens typical with 10 white LEDs, blue LEDs also available


                  3C ProPolymer® Xenon
                  • Powered by 3 "C" alkaline batteries
                  • 785 mA xenon gas-filled module
                  • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


                    3N ProPolymer® LED
                    • Powered by 3 "N" alkaline batteries
                    • 3 ultra-bright 100,000-hour life LEDs
                    • LEDs provide up to 30 lumens, blue LEDs also available


                      4AA ProPolymer® Lux Div 1
                      • C4® LED technology, with a 50,000 hour lifetime.
                      • Unbreakable polycarbonate lens with scratch-resistant coating.
                      • 100 lumens typical; up to 4,200 candela peak beam intensity.


                        4AA ProPolymer® Xenon
                        • Powered by 4 "AA" alkaline batteries
                        • Features a xenon gas-filled module
                        • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                          Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
                          • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                          • Features a 210 degree articulating head that rotates a full 360 degrees
                          • 4 lighting modes
                          • Optimized electronics provide regulated intensity


                          Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
                          • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                          • Features a 210 degree articulating head that rotates a full 360 degrees
                          • 4 lighting modes
                          • Optimized electronics provide regulated intensity


                          Stylus® – UL Model
                          • Body available in Black
                          • High-intensity 100,000 hour LED available in Artic White
                          • Light Output: 140 candela peak beam intensity, 24m beam distance and 11 lumens measured system output.


                            Knucklehead® HAZ-LO® – Flood Model
                            • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                            • Features a 210 degree articulating head that rotates a full 360 degrees
                            • 4 lighting modes
                            • Optimized electronics provide regulated intensity


                            Knucklehead® HAZ-LO® – Spot Model
                            • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                            • Features a 210 degree articulating head that rotates a full 360 degrees
                            • 4 lighting modes
                            • Optimized electronics provide regulated intensity


                            Knucklehead® HAZ-LO® – Flood Model
                            • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                            • Features a 210 degree articulating head that rotates a full 360 degrees
                            • 4 lighting modes
                            • Optimized electronics provide regulated intensity


                            Knucklehead® HAZ-LO® – Spot Model
                            • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                            • Features a 210 degree articulating head that rotates a full 360 degrees
                            • 4 lighting modes
                            • Optimized electronics provide regulated intensity

                             
                            ; Cache: True
                             Page:  Flush: