Product Selector

17 Results Found

Survivor® (Alkaline Model)
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes:
    • High for a super-bright beam that pierces through smoke
    • Low for bright light and longer run time
    • Flash for signaling
    • Moonlight mode provides low-level lighting for battery conservation
  • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
  • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
  • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


2AA ProPolymer® Xenon
  • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
  • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
  • Powered by two "AA" alkaline batteries (included)
  • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
  • IP57 rated design; dust and water ingress protected


3C ProPolymer® LED
  • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
  • 10 ultra-bright white 100,000-hour life LEDs deliver 54 lumens; runs 336 hours
  • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
  • Waterproof/Dustproof IP65


3C ProPolymer® Xenon
  • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
  • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
  • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
  • Waterproof/Dustproof IP65


3N ProPolymer® LED
  • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <135°C.
  • 3 ultra-bright white 100,000-hour life LEDs deliver 30 lumens; runs 120 hours
  • Powered by three "N" alkaline batteries (included)
  • Anti-static, impact-resistant polymer construction


4AA ProPolymer® LUX
  • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
  • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
  • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
  • Uses four "AA" alkaline batteries (included)
  • IP67; waterproof to 1 meter for 30 minutes


4AA ProPolymer® Xenon
  • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
  • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
  • Powered by four "AA" alkaline batteries
  • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
  • Push-button tail switch for momentary or constant “on”
  • Waterproof/Dustproof IP65


Survivor® LED (Alkaline Model)
  • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp)continually preset. It has a maximum adverse surface temperature of <135°C.
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes
  • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
  • IP54 water-resistant; 2 meter impact resistance tested


Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
  • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Survivor® (Alkaline Model)
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes:
    • High for a super-bright beam that pierces through smoke
    • Low for bright light and longer run time
    • Flash for signaling
    • Moonlight mode provides low-level lighting for battery conservation
  • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
  • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


Knucklehead® HAZ-LO® – Flood Model
  • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Knucklehead® HAZ-LO® – Spot Model
  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Knucklehead® HAZ-LO® – Flood Model
  • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity


Knucklehead® HAZ-LO® – Spot Model
  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 lighting modes
  • Optimized electronics provide regulated intensity

 
; Cache: True
 Page:  Flush: