Product Selector

7 Results Found

4AA ProPolymax®
  • TEN-TAP® programmable switch allows user selection of one of three different programs:
    • high/low/strobe (factory default)
    • high only
    • low/high 
  • C4® LED output:
    • High: 300 lumens; 17,000 candela; runs 2.75 hours
    • Low: 50 lumens; 2,500 candela; runs 24 hours
    • Strobe runs 6 hours
  • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


4AA ProPolymer® Lux Div 2
  • C4® LED technology, with a 50,000 hour lifetime.
  • Unbreakable polycarbonate lens with scratch-resistant coating.
  • 100 lumens typical; up to 4,200 candela peak beam intensity.


    4AA ProPolymer® Xenon
    • Powered by 4 "AA" alkaline batteries
    • Features a xenon gas-filled module
    • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


      4AA ProPolymer® LED
      • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
      • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
      • Powered by four "AA" alkaline batteries (included)
      • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
      • Push-button tail switch for momentary or constant “on”
      • Waterproof/Dustproof IP65


      4AA ProPolymer® LUX
      • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
      • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
      • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
      • Uses four "AA" alkaline batteries (included)
      • IP67; waterproof to 1 meter for 30 minutes


      4AA ProPolymer® Xenon
      • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
      • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
      • Powered by four "AA" alkaline batteries
      • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
      • Push-button tail switch for momentary or constant “on”
      • Waterproof/Dustproof IP65


      4AA ProPolymer® Xenon
      • Powered by 4 "AA" alkaline batteries
      • Features a xenon gas-filled module
      • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)

         
        ; Cache: True
         Page:  Flush: