Product Selector

7 Results Found

3C ProPolymer® LED
  • Powered by 3 "C" alkaline batteries
  • 10 ultra-bright 100,000-hour life LEDs
  • 85 lumens typical with 10 white LEDs, blue LEDs also available


    4AA ProPolymer® Lux Div 1
    • C4® LED technology, with a 50,000 hour lifetime.
    • Unbreakable polycarbonate lens with scratch-resistant coating.
    • 100 lumens typical; up to 4,200 candela peak beam intensity.


      3C ProPolymer® LED
      • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
      • 10 ultra-bright white 100,000-hour life LEDs deliver 54 lumens; runs 336 hours
      • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
      • Waterproof/Dustproof IP65


      4AA ProPolymer® LED
      • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
      • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
      • Powered by four "AA" alkaline batteries (included)
      • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
      • Push-button tail switch for momentary or constant “on”
      • Waterproof/Dustproof IP65


      4AA ProPolymer® LUX
      • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
      • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
      • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
      • Uses four "AA" alkaline batteries (included)
      • IP67; waterproof to 1 meter for 30 minutes


      3C ProPolymer® LED
      • Powered by 3 "C" alkaline batteries
      • 10 ultra-bright 100,000-hour life LEDs
      • 85 lumens typical with 10 white LEDs, blue LEDs also available


        4AA ProPolymer® Lux Div 1
        • C4® LED technology, with a 50,000 hour lifetime.
        • Unbreakable polycarbonate lens with scratch-resistant coating.
        • 100 lumens typical; up to 4,200 candela peak beam intensity.

           
          ; Cache: True
           Page:  Flush: