Product Selector

43 Results Found

Stylus Reach® 18"
  • High-intensity white LED, with a 100,000 hour lifetime.
  • 140 Candela peak beam intensity, 11 lumens typical.
  • 24 continuous hours runtime to the 10% lumen output level.
  • Cable allows for 25.5" of reach.


    Stylus® – UL Model
    • Body available in Black
    • High-intensity 100,000 hour LED available in Artic White
    • Light Output: 140 candela peak beam intensity, 24m beam distance and 11 lumens measured system output.


      Survivor® (Alkaline Model)
      • Click here for Data Sheet
      • Available in rechargeable and alkaline models
      • Features C4® LED technology with four lighting modes:
        • High for a super-bright beam that pierces through smoke
        • Low for bright light and longer run time
        • Flash for signaling
        • Moonlight mode provides low-level lighting for battery conservation
      • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
      • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


      Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
      • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
      • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
      • Kit includes:
        • 3AA ProPolymer® HAZ-LO® with alkaline batteries
        • Streamlight Helmet Mount
        • Rubber Helmet Strap


      2AA ProPolymer® Xenon
      • Powered by 2 "AA" alkaline batteries
      • Xenon gas-filled bi-pin bulb
      • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


      3AA ProPolymer® HAZ-LO®
      • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations
      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
      • Combination of visual and mechanical polarity protection ensures correct installation of batteries
      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


      3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
      • Kit includes:
        • 3AA ProPolymer® HAZ-LO® with alkaline batteries
        • Streamlight Helmet Mount
        • Rubber Helmet Strap


      3C ProPolymer® HAZ-LO®
      • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


      3C ProPolymer® LED
      • Powered by 3 "C" alkaline batteries
      • 10 ultra-bright 100,000-hour life LEDs
      • 85 lumens typical with 10 white LEDs, blue LEDs also available


        3C ProPolymer® Lux Div 1
        • Powered by 3 "C" alkaline batteries
        • Up to 3,500 Candela (peak beam intensity), 44 lumens (typical)
        • Runs up to 4 hrs. at full intensity with 16 additional hrs. of declining usable light


          3C ProPolymer® Xenon
          • Powered by 3 "C" alkaline batteries
          • 785 mA xenon gas-filled module
          • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


            3N ProPolymer® LED
            • Three ultra-bright white LEDs provide a soft flood beam for up-close tasks
            • 30 lumens; 300 candela; 35m beam distance; runs 10 hours
            • Impact and chemical resistant polymer resin; o-ring sealed and vented; impact resistant polymer facecap overmolded onto polycarbonate lens
            • IPX4 water resistant; 2 meter impact resistance tested


            4AA ProPolymer® Lux Div 1
            • C4® LED technology, with a 50,000 hour lifetime.
            • Unbreakable polycarbonate lens with scratch-resistant coating.
            • 100 lumens typical; up to 4,200 candela peak beam intensity.


              4AA ProPolymer® Xenon
              • Powered by 4 "AA" alkaline batteries
              • Features a xenon gas-filled module
              • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                2AA ProPolymer® Xenon
                • Powered by 2 "AA" alkaline batteries
                • Xenon gas-filled bi-pin bulb
                • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


                3AA ProPolymer® HAZ-LO®
                • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations
                • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                • Combination of visual and mechanical polarity protection ensures correct installation of batteries
                • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                • Kit includes:
                  • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                  • Streamlight Helmet Mount
                  • Rubber Helmet Strap


                3C ProPolymer® HAZ-LO®
                • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
                • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


                3C ProPolymer® LED
                • Powered by 3 "C" alkaline batteries
                • 10 ultra-bright 100,000-hour life LEDs
                • 85 lumens typical with 10 white LEDs, blue LEDs also available


                  3C ProPolymer® Lux Div 1
                  • Powered by 3 "C" alkaline batteries
                  • Up to 3,500 Candela (peak beam intensity), 44 lumens (typical)
                  • Runs up to 4 hrs. at full intensity with 16 additional hrs. of declining usable light


                    3C ProPolymer® Xenon
                    • Powered by 3 "C" alkaline batteries
                    • 785 mA xenon gas-filled module
                    • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


                      3N ProPolymer® LED
                      • Three ultra-bright white LEDs provide a soft flood beam for up-close tasks
                      • 30 lumens; 300 candela; 35m beam distance; runs 10 hours
                      • Impact and chemical resistant polymer resin; o-ring sealed and vented; impact resistant polymer facecap overmolded onto polycarbonate lens
                      • IPX4 water resistant; 2 meter impact resistance tested


                      4AA ProPolymer® Lux Div 1
                      • C4® LED technology, with a 50,000 hour lifetime.
                      • Unbreakable polycarbonate lens with scratch-resistant coating.
                      • 100 lumens typical; up to 4,200 candela peak beam intensity.


                        4AA ProPolymer® Xenon
                        • Powered by 4 "AA" alkaline batteries
                        • Features a xenon gas-filled module
                        • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                          Dualie® 3AA
                          • INTRINSICALLY SAFE
                          • Click here for Data Sheet
                          • Features two C4® LEDs and three lighting modes: spot, flood, spot and flood simultaneously
                          • Beams intersect for optimum path illumination and no blind spots
                          • Dual head switches on either side of the body for easy beam selection and one-handed operation
                          • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


                          Dualie® 3AA Laser
                          • INTRINSICALLY SAFE
                          • Click here for Data Sheet
                          • Dualie Laser model features one C4® LED and a 640nm - 650nm red laser and three lighting modes: spot, laser, spot and laser simultaneously
                          • Dual head switches on either side of the body for easy beam selection and one-handed operation
                          • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


                          Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
                          • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                          • Features a 210 degree articulating head that rotates a full 360 degrees
                          • 4 lighting modes
                          • Optimized electronics provide regulated intensity


                          Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
                          • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                          • Features a 210 degree articulating head that rotates a full 360 degrees
                          • 4 lighting modes
                          • Optimized electronics provide regulated intensity


                          Stylus® – UL Model
                          • Body available in Black
                          • High-intensity 100,000 hour LED available in Artic White
                          • Light Output: 140 candela peak beam intensity, 24m beam distance and 11 lumens measured system output.


                            Survivor® (Alkaline Model)
                            • Click here for Data Sheet
                            • Available in rechargeable and alkaline models
                            • Features C4® LED technology with four lighting modes:
                              • High for a super-bright beam that pierces through smoke
                              • Low for bright light and longer run time
                              • Flash for signaling
                              • Moonlight mode provides low-level lighting for battery conservation
                            • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                            • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


                            3AA ProPolymer® HAZ-LO®
                            • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations
                            • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                            • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                            • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                            • Combination of visual and mechanical polarity protection ensures correct installation of batteries
                            • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                            3AA ProPolymer® HAZ-LO® 7 LED
                            • Rated for Zone 0 locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum surface temperature of <135°C
                            • A cluster of seven 5mm LEDs provide a soft, wide beam for tasks at arm’s length and other up-close task lighting
                            • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                            • "Captured locking" set screw will not back out - prevents FOD (Foreign Object Debris)
                            • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment


                            3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                            • Kit includes:
                              • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                              • Streamlight Helmet Mount
                              • Rubber Helmet Strap


                            3C ProPolymer® HAZ-LO®
                            • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
                            • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                            • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                            • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                            • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


                            Stylus Reach®
                            • ATEX-rated for Category 2G (Zone 1) locations. IECEx-rated for Group IIB locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation. It has a maximum adverse surface temperature of <300°C
                            • Features a 17.78 cm extension cable that allows for 35.6 cm of reach so you can illuminate those hard-to-reach areas
                            • High-intensity 100,000 hour white LED delivers 11 lumens; 140 candela peak beam intensity, 24m beam distance; runs 24 hours
                            • Uses three "AAAA" alkaline batteries (included)
                            • Features a momentary blink switch and constant on


                            Dualie® 3AA
                            • INTRINSICALLY SAFE
                            • Click here for Data Sheet
                            • Features two C4® LEDs and three lighting modes: spot, flood, spot and flood simultaneously
                            • Beams intersect for optimum path illumination and no blind spots
                            • Dual head switches on either side of the body for easy beam selection and one-handed operation
                            • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


                            Dualie® 3AA Laser
                            • INTRINSICALLY SAFE
                            • Click here for Data Sheet
                            • Dualie Laser model features one C4® LED and a 640nm - 650nm red laser and three lighting modes: spot, laser, spot and laser simultaneously
                            • Dual head switches on either side of the body for easy beam selection and one-handed operation
                            • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


                            Knucklehead® HAZ-LO® – Flood Model
                            • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                            • Features a 210 degree articulating head that rotates a full 360 degrees
                            • 4 lighting modes
                            • Optimized electronics provide regulated intensity


                            Knucklehead® HAZ-LO® – Spot Model
                            • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                            • Features a 210 degree articulating head that rotates a full 360 degrees
                            • 4 lighting modes
                            • Optimized electronics provide regulated intensity


                            Knucklehead® HAZ-LO® – Flood Model
                            • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                            • Features a 210 degree articulating head that rotates a full 360 degrees
                            • 4 lighting modes
                            • Optimized electronics provide regulated intensity


                            Knucklehead® HAZ-LO® – Spot Model
                            • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                            • Features a 210 degree articulating head that rotates a full 360 degrees
                            • 4 lighting modes
                            • Optimized electronics provide regulated intensity

                             
                            ; Cache: True
                             Page:  Flush: