Product Selector

20 Results Found

Multi Ops®
  • Shock-proof C4® LED design – 2-3x Brighter than a High Flux LED!
  • Light Output and Runtime:
    C4® LED – Impervious to shock with a 50,000 hour lifetime; 2500 candela peak beam intensity; 50 lumens; 4.75 continuous hours to 10% of initial lumen output.
    Five (5) 390nm UV LEDs – 40mw measured system output; 10 continuous hours to 10% of initial output power.
    Visible Red Laser – 650nm, Class IIIa (3R), <5mW laser output power, useable laser range of 100+ feet when in LED/Laser mode, 100+ yards when in Laser Only mode; 40 continuous hours.
    White C4 LED/Laser Mode – 4 continuous hours.
  • Powered by 3 "AAA" alkaline batteries (included)


    MicroStream®
    • C4® LED delivers 35 lumens; 360 candela; runs 2.25 hours
    • Ultra-compact design fits in the palm of your hand, comfortably fits in your pocket
    • Removable pocket clip also clips onto brim of hat for hands free use
    • Type II MIL-SPEC abrasion and corrosion-resistant anodized aircraft aluminum construction with unbreakable, scratch-resistant polycarbonate lens


    Streamlight Jr.® Reach LED
    • Includes extension cable that allows for 14" of "reach"
    • Next generation C4® LED technology, impervious to shock with a 50,000 hour lifetime
    • Up to 1,600 candela peak central intensity and 85 lumens measured system output. Textured parabolic reflector produces an even, wide beam hotspot.
    • Up to 3.25 hours of run time to the 10% output level


      PolyTac® Helmet Lighting Kit
      • Kit includes:
        • PolyTac with lithium batteries
        • Streamlight Helmet Mount
        • Rubber Helmet Strap
      • PolyTac specs:
        • C4® LED technology within a parabolic reflector produces a concentrated beam with optimum peripheral illumination
        • TEN-TAP® Programming: Choice of three operating modes: 1.) high/strobe/low (factory default); 2.) high only; 3.) low/high
        • Solid State power regulation provides maximum light output throughout battery life
             


      NightFighter® LED
      • Anti-roll head
      • C4® LED – Up to 9000 candela (peak beam intensity); 160 lumens
      • Up to 3.5 hours of runtime to the 10% output level.


      PolyTac®
      • C4® LED technology within a parabolic reflector produces a concentrated beam with optimum peripheral illumination
      • TEN-TAP® Programming with a choice of three operating modes
      • Solid State power regulation provides maximum light output throughout battery life
      • Reflector produces a concentrated beam with optimum peripheral illumination — ideal for law enforcement backup light; day-to-day industrial use; maintaining vehicles; general contracting work


      PolyTac® HP
      • C4® LED technology within a deep reflector provides far-reaching targeting beam with a tight spotlight and optimum peripheral illumination
      • TEN-TAP® Programming with choice of three operating modes:
      • Solid State power regulation provides maximum light output throughout battery life
      • Deep reflector produces 275m beam - ideal for lighting the way to the end of a dark alley, down a wooded path, inspecting utility lines from the ground, or search and rescue missions


      Scorpion®
      • Xenon gas bulb, designed to last through 5 sets of batteries (spare bulb included)
      • Up to 7,900 peak beam candlepower (78 lumens measured system output)
      • Adjustable spot-to-flood focus


        Scorpion® LED
        • Anti-roll head
        • C4® LED is 2X brighter than a Super high-flux LED – 9,000 candela (peak beam intensity); 160 lumens
        • Up to 3.5 hours of runtime to the 10% output level.


        Super Tac®
        • C4® LED, shock-proof with a 50,000 hr lifetime, is 3X brighter than a super high-flux LED
        • Up to 30,000 candela (peak beam intensity); 160 lumens measured system output.
        • Deep-dish parabolic reflector produces a long range targeting beam with optimum peripheral illumination to aid in navigation. Optimized electronics provide regulated intensity.
        • Runtime: up to 3.5 hours to the 10% output level


        TL-2® LED
        • Team Soldier Certified Gear
        • C4® LED is 2X brighter than a Super high-flux LED – Up to 9000 candela (peak beam intensity); 160 lumens
        • Up to 3.5 hours of runtime to the 10% output level.


        2AA ProPolymer® Xenon
        • Powered by 2 "AA" alkaline batteries
        • Xenon gas-filled bi-pin bulb
        • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


        4AA ProPolymer® Lux Div 2
        • C4® LED technology, with a 50,000 hour lifetime.
        • Unbreakable polycarbonate lens with scratch-resistant coating.
        • 100 lumens typical; up to 4,200 candela peak beam intensity.


          4AA ProPolymer® Xenon
          • Powered by 4 "AA" alkaline batteries
          • Features a xenon gas-filled module
          • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


            2AA ProPolymer® Xenon
            • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
            • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
            • Powered by two "AA" alkaline batteries (included)
            • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
            • IP57 rated design; dust and water ingress protected


            4AA ProPolymer® Xenon
            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
            • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
            • Powered by four "AA" alkaline batteries
            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
            • Push-button tail switch for momentary or constant “on”
            • Waterproof/Dustproof IP65


            2AA ProPolymer® Xenon
            • Powered by 2 "AA" alkaline batteries
            • Xenon gas-filled bi-pin bulb
            • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


            4AA ProPolymer® Xenon
            • Powered by 4 "AA" alkaline batteries
            • Features a xenon gas-filled module
            • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


              PolyTac®
              • C4® LED technology within a parabolic reflector produces a concentrated beam with optimum peripheral illumination
              • TEN-TAP® Programming with a choice of three operating modes
              • Solid State power regulation provides maximum light output throughout battery life
              • Reflector produces a concentrated beam with optimum peripheral illumination — ideal for law enforcement backup light; day-to-day industrial use; maintaining vehicles; general contracting work


              PolyTac® HP
              • C4® LED technology within a deep reflector provides far-reaching targeting beam with a tight spotlight and optimum peripheral illumination
              • TEN-TAP® Programming with choice of three operating modes:
              • Solid State power regulation provides maximum light output throughout battery life
              • Deep reflector produces 275m beam - ideal for lighting the way to the end of a dark alley, down a wooded path, inspecting utility lines from the ground, or search and rescue missions

               
              ; Cache: True
               Page:  Flush: