Product Selector

31 Results Found

Survivor® (Alkaline Model)
  • Available in rechargeable and alkaline models
  • Features C4® LED technology with four lighting modes:
    • High for a super-bright beam that pierces through smoke
    • Low for bright light and longer run time
    • Flash for signaling
    • Moonlight mode provides low-level lighting for battery conservation
  • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
  • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


Knucklehead® (Alkaline Model)
  • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
  • Shockproof dual C4® premium LED technology delivers 200 lumens
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 modes:
    High – 1150 candela peak beam intensity, 200 Lumens, 3.5 hour runtime
    Low – 350 candela peak beam intensity, 63 lumens, 16 hour runtime
    Moonlight – 20 day runtime
    Flash – 8 hour runtime


    Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
    • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 lighting modes
    • Optimized electronics provide regulated intensity


    Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
    • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 lighting modes
    • Optimized electronics provide regulated intensity


    Knucklehead® with Clip (Alkaline Model)
    • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
    • Shockproof dual C4® premium LED technology delivers 200 lumens
    • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
    • Features a 210 degree articulating head that rotates a full 360 degrees


      2AA ProPolymer® LED
      • Powered by 2 "AA" alkaline batteries
      • One (1) 0.5 Watt High-Flux LED, 30,000 hour lifetime in parabolic reflector module.
      • 20 Lumens typical. Parabolic reflector produces a focused beam with optimum peripheral illumination.


        2AA ProPolymer® Xenon
        • Powered by 2 "AA" alkaline batteries
        • Xenon gas-filled bi-pin bulb
        • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


        4AA ProPolymax®
        • TEN-TAP® programmable switch allows user selection of one of three different programs:
          • high/low/strobe (factory default)
          • high only
          • low/high 
        • C4® LED output:
          • High: 300 lumens; 17,000 candela; runs 2.75 hours
          • Low: 50 lumens; 2,500 candela; runs 24 hours
          • Strobe runs 6 hours
        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


        4AA ProPolymer® LED
        • Powered by 4 "AA" alkaline batteries
        • 7 ultra-bright 100,000-hour life LEDs
        • 67 lumens typical with 7 white LEDs, blue LEDs also available


          4AA ProPolymer® Lux Div 1
          • C4® LED technology, with a 50,000 hour lifetime.
          • Unbreakable polycarbonate lens with scratch-resistant coating.
          • 100 lumens typical; up to 4,200 candela peak beam intensity.


            4AA ProPolymer® Lux Div 2
            • C4® LED technology, with a 50,000 hour lifetime.
            • Unbreakable polycarbonate lens with scratch-resistant coating.
            • 100 lumens typical; up to 4,200 candela peak beam intensity.


              4AA ProPolymer® Xenon
              • Powered by 4 "AA" alkaline batteries
              • Features a xenon gas-filled module
              • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                2AA ProPolymer® LED
                • ATEX-approved for Category 3 (Zone 2) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum operating temperature of <100°C.
                • .5w super-bright, high-flux 30,000-hour life LED delivers 20 lumens; 2,300 candela; runs 20 hours
                • Powered by two "AA" alkaline batteries (included)
                • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
                • IP57 rated design; dust and water ingress protected


                2AA ProPolymer® Xenon
                • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
                • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
                • Powered by two "AA" alkaline batteries (included)
                • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
                • IP57 rated design; dust and water ingress protected


                4AA ProPolymer® LED
                • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
                • Powered by four "AA" alkaline batteries (included)
                • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                • Push-button tail switch for momentary or constant “on”
                • Waterproof/Dustproof IP65


                4AA ProPolymer® LUX
                • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
                • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
                • Uses four "AA" alkaline batteries (included)
                • IP67; waterproof to 1 meter for 30 minutes


                4AA ProPolymer® Xenon
                • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
                • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
                • Powered by four "AA" alkaline batteries
                • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                • Push-button tail switch for momentary or constant “on”
                • Waterproof/Dustproof IP65


                Survivor® LED (Alkaline Model)
                • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp)continually preset. It has a maximum adverse surface temperature of <135°C.
                • Available in rechargeable and alkaline models
                • Features C4® LED technology with four lighting modes
                • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
                • IP54 water-resistant; 2 meter impact resistance tested


                2AA ProPolymer® Xenon
                • Powered by 2 "AA" alkaline batteries
                • Xenon gas-filled bi-pin bulb
                • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


                4AA ProPolymer® LED
                • Powered by 4 "AA" alkaline batteries
                • 7 ultra-bright 100,000-hour life LEDs
                • 67 lumens typical with 7 white LEDs, blue LEDs also available


                  4AA ProPolymer® Lux Div 1
                  • C4® LED technology, with a 50,000 hour lifetime.
                  • Unbreakable polycarbonate lens with scratch-resistant coating.
                  • 100 lumens typical; up to 4,200 candela peak beam intensity.


                    4AA ProPolymer® Xenon
                    • Powered by 4 "AA" alkaline batteries
                    • Features a xenon gas-filled module
                    • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                      Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
                      • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                      • Features a 210 degree articulating head that rotates a full 360 degrees
                      • 4 lighting modes
                      • Optimized electronics provide regulated intensity


                      Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
                      • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                      • Features a 210 degree articulating head that rotates a full 360 degrees
                      • 4 lighting modes
                      • Optimized electronics provide regulated intensity


                      Survivor® (Alkaline Model)
                      • Available in rechargeable and alkaline models
                      • Features C4® LED technology with four lighting modes:
                        • High for a super-bright beam that pierces through smoke
                        • Low for bright light and longer run time
                        • Flash for signaling
                        • Moonlight mode provides low-level lighting for battery conservation
                      • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                      • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


                      Knucklehead® HAZ-LO® – Flood Model
                      • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                      • Features a 210 degree articulating head that rotates a full 360 degrees
                      • 4 lighting modes
                      • Optimized electronics provide regulated intensity


                      Knucklehead® HAZ-LO® – Spot Model
                      • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                      • Features a 210 degree articulating head that rotates a full 360 degrees
                      • 4 lighting modes
                      • Optimized electronics provide regulated intensity


                      Knucklehead®
                      • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
                      • Shockproof dual C4® premium LED technology delivers 200 lumens
                      • Features a 210 degree articulating head that rotates a full 360 degrees
                      • 4 modes:
                        High – 1150 candela peak beam intensity, 200 Lumens, 3.5 hour runtime
                        Low – 350 candela peak beam intensity, 63 lumens, 16 hour runtime
                        Moonlight – 20 day runtime
                        Flash – 8 hour runtime


                        Knucklehead® HAZ-LO® – Flood Model
                        • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                        • Features a 210 degree articulating head that rotates a full 360 degrees
                        • 4 lighting modes
                        • Optimized electronics provide regulated intensity


                        Knucklehead® HAZ-LO® – Spot Model
                        • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                        • Features a 210 degree articulating head that rotates a full 360 degrees
                        • 4 lighting modes
                        • Optimized electronics provide regulated intensity


                        Knucklehead® with Clip
                        • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
                        • Shockproof dual C4® premium LED technology delivers 200 lumens
                        • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
                        • Features a 210 degree articulating head that rotates a full 360 degrees

                           
                          ; Cache: True
                           Page:  Flush: