Product Selector

13 Results Found

Fire Vulcan®
  • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <135°C Gas, 53°C Dust.
  • Features high-intensity xenon bi-pin bulb and two ultra-bright blue taillight LEDs
  • Xenon bulb delivers 50 lumens; 31,000 candela
  • Strobe and Steady Modes
  • 6V 4.5 amp-hour rechargeable battery can be recharged up to 500 times
  • Waterproof/Dustproof IP66


Fire Vulcan® Vehicle Mount System
  • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <135°C Gas, 53°C Dust.
  • Features high-intensity xenon bi-pin bulb and two ultra-bright blue taillight LEDs
  • Xenon bulb delivers 50 lumens; 31,000 candela
  • Strobe and Steady Modes
  • 6V 4.5 amp-hour rechargeable battery can be recharged up to 500 times
  • Waterproof/Dustproof IP66


Vulcan®
  • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <135°C Gas, 53°C Dust.
  • High-intensity 3 watt spot xenon bulb provides 50 lumens; 31,000 candela; runs 13 hours
  • Zero-maintenance 4.5 amp-hour sealed lead acid battery is rechargeable up to 500 times
  • Features a three-position toggle switch for easy use with gloves
  • High-impact ABS thermoplastic housing with rubberized cushioned grip handle
  • Waterproof/Dustproof IP66


Vulcan® Dual Filament System
  • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <450°C Gas, 62°C Dust.
  • Xenon dual filament 8 watt safety bulb delivers instant backup beam has up to 157 lumens,, 70,000 candela each; runs 3.25 hours
  • Zero-maintenance 4.5 amp-hour sealed lead acid battery is rechargeable up to 500 times
  • Features a three-position toggle switch for easy use with gloves
  • High-impact ABS thermoplastic housing with rubberized cushioned grip handle
  • Waterproof/Dustproof IP66


Vulcan® Vehicle Mount System
  • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <135°C Gas, 53°C Dust.
  • High-intensity 3 watt spot xenon bulb or 8 watt spot xenon dual filament safety bulb that delivers instant backup beam
    • 3 watt spot provides 50 lumens; 31,000 candela; runs 13 hours
    • Each Dual filament 8 watt spot provides 157 lumens; 70,000 candela each; runs 3.25 hours
  • Features a three-position toggle switch for easy use with gloves
  • Zero-maintenance 4.5 amp-hour sealed lead acid battery is rechargeable up to 500 times
  • High-impact ABS thermoplastic housing with rubberized cushioned grip handle
  • Waterproof/Dustproof IP66


Fire Vulcan®
  • High-intensity halogen 8 watt spot bi-pin bulb and two ultra-bright blue LEDs
  • Strobe and Steady Modes
  • Up to 80,000 candela (peak beam intensity) with halogen bulb


    Fire Vulcan® LED
    • C4® LED, impervious to shock with a 50,000 hr lifetime
    • Light Output:
      • High: 80,000 candela peak beam intensity; 145 lumens; 566m beam distance; runs 3 hours
      • Low: 40,000 candela peak beam intensity; 70 lumens; runs 6 hours
    • Deep-dish parabolic reflector produces a tight beam with optimum peripheral illumination to aid in navigation; Optimized electronics provide regulated intensity
    • Ultra-bright blue taillight LEDs make certain you can be seen even in thick smoke
    • 8 programmable switch functions


    Fire Vulcan® Vehicle Mount System
    • High-intensity halogen 8 watt spot bi-pin bulb and two ultra-bright blue LEDs
    • Strobe and Steady Modes
    • Up to 80,000 candela (peak beam intensity) with halogen bulb


      Survivor® LED
      • Available in rechargeable and alkaline models
      • Features C4® LED technology with four lighting modes
      • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications. Optimum peripheral illumination to aid in navigation
      • Spring loaded clip with built-in ring easily attaches to belts and harnesses.


      Survivor® LED
      • Available in rechargeable and alkaline models
      • Features C4® LED technology with four lighting modes
      • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications. Optimum peripheral illumination to aid in navigation
      • Spring loaded clip with built-in ring easily attaches to belts and harnesses.


      Vulcan®
      • High-intensity halogen bi-pin bulb
      • 8 watt spot provides up to 80,000 candela (peak beam intensity), 150 lumens typical
      • Up to 3.25 hrs. continuous run time per charge


        Vulcan® Dual Filament System
        • Xenon dual filament 8 watt safety bulb delivers instant backup beam
        • Dual filament 8 watt spot has up to 70,000 candela (peak beam intensity) each, 157 lumens typical
        • Up to 3.25 hrs. continuous run time per charge


          Vulcan® Vehicle Mount System
          • High-intensity halogen bi-pin bulb
          • 8 watt spot provides up to 80,000 candela (peak beam intensity), 150 lumens typical
          • Up to 3.25 hrs. continuous run time per charge

             
            ; Cache: True
             Page:  Flush: