Product Selector

3 Results Found

2AA ProPolymer® LED
  • ATEX-approved for Category 3 (Zone 2) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum operating temperature of <100°C.
  • .5w super-bright, high-flux 30,000-hour life LED delivers 25 lumens; 2,300 candela; runs 18 hours
  • Powered by two "AA" alkaline batteries (included)
  • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
  • IP57 rated design; dust and water ingress protected


3AA HAZ-LO
  • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <200°C.
  • RoHS compliant
  • C4® LED delivers 120 lumens; 6,800 candela; 165 meter beam distance, runs 11 hours
  • Parabolic reflector produces long range brilliance and smooth uniform beam pattern
  • Uses three "AA" alkaline batteries (included)
  • Push-button on/off switch easy to use even when wearing heavy gloves


4AA ProPolymer® Xenon
  • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
  • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
  • Powered by four "AA" alkaline batteries
  • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
  • Push-button tail switch for momentary or constant “on”
  • Waterproof/Dustproof IP65

 
; Cache: True
 Page:  Flush: