Product Selector

63 Results Found

Filters In Use

(click the X to remove)
Battery Style:
Battery Type:

Narrow Your Results


Twin-Task® 3AA LED
  • C4® LED technology, with a 50,000 hour lifetime. Three ultra-bright white LEDs with 100,000 hour lifetime.
  • 2 modes:
    C4 LED – 2283 candela peak beam intensity, 100 Lumens, 5.75 hours runtime
    3 LED – 467 candela peak beam intensity, 33 Lumens, 34 hours runtime
  • IPX4 rated for water-resistant operation. All openings O-ring sealed. One meter impact resistance tested. Wrist lanyard.


    Twin-Task® 3AAA LASER LED
    • Pre-focused visible red Laser cartridge. C4® LED technology, with a 50,000 hour lifetime. Five ultra-bright white LEDs with 100,000 hour lifetime.
    • 2 modes:
      C4 LED – 2000 candela peak beam intensity, 100 Lumens, 2.75 hours runtime
      5 LED – 800 candela peak beam intensity, 68 Lumens, 5.25 hours runtime
    • Push-button sequences through four positions — Laser only, C4® LED, Laser/C4® LED combo, or five ultra-bright white LEDs.


      Task-Light® 3AA LED
      • Powered by 3 "AA" alkaline batteries
      • 1 watt C4® LED is 3 times brighter than a super high-flux LED – 95 lumens typical
      • Up to 16 hours run time


        Siege® AA Pink
        • Click here for Data Sheet
        • For every Breast Cancer Research Foundation® Siege® AA Pink sold, Streamlight will donate $2 to the Breast Cancer Research Foundation.
        • Multiple modes: White LED (Low, Medium, High) and Red LED (Flash SOS, Red LED High)
        • Polycarbonate glare-reducing cover provides soft, even 360° light distribution; comfortable to use in close quarters without impairing vision; cover is removable to illuminate large areas
        • Stand it upright or hang it with D-ring on base of lantern to use as an overhead light
        • Incorporated D-ring on bottom of lantern is spring-loaded to stow against the light, out of the way when not in use


        Streamlight Jr.® LED
        • 1 watt C4® LED, 50,000-hr. LED
        • Up to 3800 candela (peak beam intensity) and 85 lumens measured system output
        • Runtime to the 10% output level:
          "AA" Alkaline Batteries – 4 Hours
          "AA" (L91) Lithium Batteries – 5.25 Hours


          Streamlight Jr.® Reach LED
          • Includes extension cable that allows for 14" of "reach"
          • Next generation C4® LED technology, impervious to shock with a 50,000 hour lifetime
          • Up to 1,600 candela peak central intensity and 85 lumens measured system output. Textured parabolic reflector produces an even, wide beam hotspot.
          • Up to 3.25 hours of run time to the 10% output level


            Survivor® (Alkaline Model)
            • Click here for Data Sheet
            • Available in rechargeable and alkaline models
            • Features C4® LED technology with four lighting modes:
              • High for a super-bright beam that pierces through smoke
              • Low for bright light and longer run time
              • Flash for signaling
              • Moonlight mode provides low-level lighting for battery conservation
            • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
            • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


            Knucklehead® (Alkaline Model)
            • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
            • Shockproof dual C4® premium LED technology delivers 200 lumens
            • Features a 210 degree articulating head that rotates a full 360 degrees
            • 4 modes:
              High – 1150 candela peak beam intensity, 200 Lumens, 3.5 hour runtime
              Low – 350 candela peak beam intensity, 63 lumens, 16 hour runtime
              Moonlight – 20 day runtime
              Flash – 8 hour runtime


              Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
              • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
              • Features a 210 degree articulating head that rotates a full 360 degrees
              • 4 lighting modes
              • Optimized electronics provide regulated intensity


              Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
              • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
              • Features a 210 degree articulating head that rotates a full 360 degrees
              • 4 lighting modes
              • Optimized electronics provide regulated intensity


              Knucklehead® Spot (Alkaline Model)
              • Click here for Data Sheet
              • Shockproof C4® premium LED technology combined with a deep dish parabolic reflector produces a focused beam for longer distances – 210 meters on high beam.
              • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
              • Features a 210 degree articulating head that rotates a full 360 degrees


              Knucklehead® with Clip (Alkaline Model)
              • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
              • Shockproof dual C4® premium LED technology delivers 200 lumens
              • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
              • Features a 210 degree articulating head that rotates a full 360 degrees


                3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                • Kit includes:
                  • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                  • Streamlight Helmet Mount
                  • Rubber Helmet Strap


                ProTac® 1AA
                • Click here for Data Sheet
                • Features Ten-Tap® Programming – Choose from three user selectable programs:
                  1.) high/strobe/low (factory default)
                  2.) high only
                  3.) low/high
                • C4® LED illumination output and run times:
                  HIGH - 70 lumens; 1,450 candela peak beam intensity; runs 2 hours
                  LOW – 5 lumens; 125 candela peak beam intensity;  runs 32 hours
                  STROBE – runs 4 hours
                • Solid State power regulation provides maximum light output throughout battery life


                ProTac® 2AA
                • Click here for Data Sheet
                • Features Ten-Tap® Programming – Choose from three user selectable programs:
                  1.) high/strobe/low (factory default)
                  2.) high only
                  3.) low/high
                • C4® LED illumination output and run times:
                  HIGH - 155 lumens; 3,300 candela peak beam intensity; runs 2 hours
                  LOW - 11 lumens; 200 candela peak beam intensity;  runs 36 hours
                  STROBE – runs 4 hours
                • Solid State power regulation provides maximum light output throughout battery life


                ProTac® EMS
                • C4 LED technology offers 3 levels of increasing intensities: Low, medium and high
                • Powers on at low beam: 3.6 lumens/runs 36 hours; ideal for pupil exams. Faint peripheral illumination surrounding the focused beam slightly illuminates the opposite pupil without directly causing it to contract, facilitating observation of consensual contraction in dim light
                • Two taps of the tail switch accesses medium mode, which delivers 10 lumens/runs for 19 hours. Ideal for non-glare wound examination
                • Three taps of the tail switch accesses high mode, which delivers 50 lumens/runs 1.5 hours (1 AA alkaline); runs 3.4 hours using AA lithium battery


                  ProTac® Rail Mount 1
                  • Click here for Data Sheet
                  • Dual fuel - uses one AA alkaline or CR123A lithium battery (both included); also accepts AA lithium
                  • Strobe for signaling or disorienting
                  • TEN-TAP® Programming - choice of three operating modes: 1.) high/strobe; 2.) high only; 3.) low/high
                  • Remote pressure switch features momentary and “constant on” operation
                  • Integrated rail clamp attaches to MIL-STD-1913 rails


                  Sidewinder®
                  • Available in the following models and light configurations:
                    Military Model – White/Red/IR-IFF/Blue LEDs
                    Aviation Model – White/Green/IR-IFF/Blue LEDs
                    Sportsman Model – White/Red/Green/Blue LEDs
                  • C4® LED technology, white, impervious to shock with 50,000Hr lifetime.
                    5mm IR LED – 880 nm peak wavelength, impervious to shock with 100,000 hour lifetime
                    5mm Red LED – 630 nm peak wavelength, impervious to shock with 100,000 hour lifetime
                    5mm Blue LED – 470 nm peak wavelength, impervious to shock with 100,000 hour lifetime
                    5mm Green LED – 527 nm peak wavelength, impervious to shock with 100,000 hour lifetime
                  • Unbreakable polycarbonate lens with scratch-resistant coating. Gasket-sealed.
                  • Tactile indicator on rotary knob for IR LED position. (Green LED position for Sportsman model.)


                    Sidewinder® Rescue
                    • Four LEDs provide all of the colors you need for a distress marker - no need to use filters that can get lost or broken
                      • White C4® LED
                      • Blue LED
                      • IR LED
                      • Green LED
                    • All LEDs provide unidirectional light for general lighting needs and omni-directional light when using the slide-in-place diffuser
                    • Diffuser provides omni-directional light per  CID A-A-59176  (formerly MIL-SPEC MIL-L-38217D)


                    ProTac® Rail Mount 1
                    • Click here for Data Sheet
                    • Dual fuel - uses one AA alkaline or CR123A lithium battery (both included); also accepts AA lithium
                    • Strobe for signaling or disorienting
                    • TEN-TAP® Programming - choice of three operating modes: 1.) high/strobe; 2.) high only; 3.) low/high
                    • Remote pressure switch features momentary and “constant on” operation
                    • Integrated rail clamp attaches to MIL-STD-1913 rails


                    2AA ProPolymer® HAZ-LO®
                    • C4® LED delivers 65 lumens; 2,300 candela; 96m beam distance; runs 24 hours
                    • Powered by 2 "AA" alkaline batteries (included)
                    • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
                    • Impact-resistant engineering polymer construction


                    2AA ProPolymer® Xenon
                    • Powered by 2 "AA" alkaline batteries
                    • Xenon gas-filled bi-pin bulb
                    • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


                    3AA ProPolymer® Dualie®
                    • INTRINSICALLY SAFE
                    • Click here for Data Sheet
                    • Features two C4® LEDs and three lighting modes: spot, flood, spot and flood simultaneously
                    • Beams intersect for optimum path illumination and no blind spots
                    • Dual head switches on either side of the body for easy beam selection and one-handed operation
                    • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


                    3AA ProPolymer® Dualie® Laser
                    • INTRINSICALLY SAFE
                    • Dualie Laser model features one C4® LED and a 640nm - 650nm red laser and three lighting modes: spot, laser, spot and laser simultaneously
                    • Dual head switches on either side of the body for easy beam selection and one-handed operation
                    • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


                    3AA ProPolymer® HAZ-LO®
                    • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations
                    • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                    • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                    • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                    • Combination of visual and mechanical polarity protection ensures correct installation of batteries
                    • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                    3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                    • Kit includes:
                      • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                      • Streamlight Helmet Mount
                      • Rubber Helmet Strap


                    4AA ProPolymax®
                    • TEN-TAP® programmable switch allows user selection of one of three different programs:
                      • high/low/strobe (factory default)
                      • high only
                      • low/high 
                    • C4® LED output:
                      • High: 300 lumens; 17,000 candela; runs 2.75 hours
                      • Low: 50 lumens; 2,500 candela; runs 24 hours
                      • Strobe runs 6 hours
                    • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


                    4AA ProPolymer® LED
                    • Powered by 4 "AA" alkaline batteries
                    • 7 ultra-bright 100,000-hour life LEDs
                    • 67 lumens typical with 7 white LEDs, blue LEDs also available


                      4AA ProPolymer® Lux Div 1
                      • C4® LED technology, with a 50,000 hour lifetime.
                      • Unbreakable polycarbonate lens with scratch-resistant coating.
                      • 100 lumens typical; up to 4,200 candela peak beam intensity.


                        4AA ProPolymer® Lux Div 2
                        • C4® LED technology, with a 50,000 hour lifetime.
                        • Unbreakable polycarbonate lens with scratch-resistant coating.
                        • 100 lumens typical; up to 4,200 candela peak beam intensity.


                          4AA ProPolymer® Xenon
                          • Powered by 4 "AA" alkaline batteries
                          • Features a xenon gas-filled module
                          • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                            2AA ProPolymer® HAZ-LO®
                            • C4® LED delivers 65 lumens; 2,300 candela; 96m beam distance; runs 24 hours
                            • Powered by 2 "AA" alkaline batteries (included)
                            • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
                            • Impact-resistant engineering polymer construction


                            2AA ProPolymer® Xenon
                            • Powered by 2 "AA" alkaline batteries
                            • Xenon gas-filled bi-pin bulb
                            • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


                            3AA HAZ-LO® LED Headlamp
                            • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
                            • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
                            • Push-button on/off switch easy to use even when wearing heavy gloves
                            • Intrinsically safe – Class I, Div 1


                              3AA ProPolymer® Dualie®
                              • INTRINSICALLY SAFE
                              • Click here for Data Sheet
                              • Features two C4® LEDs and three lighting modes: spot, flood, spot and flood simultaneously
                              • Beams intersect for optimum path illumination and no blind spots
                              • Dual head switches on either side of the body for easy beam selection and one-handed operation
                              • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


                              3AA ProPolymer® Dualie® Laser
                              • INTRINSICALLY SAFE
                              • Dualie Laser model features one C4® LED and a 640nm - 650nm red laser and three lighting modes: spot, laser, spot and laser simultaneously
                              • Dual head switches on either side of the body for easy beam selection and one-handed operation
                              • Durable, non-conductive, corrosion-proof polymer resin; rocky stipple texture for a sure grip


                              3AA ProPolymer® HAZ-LO®
                              • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations
                              • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                              • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                              • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                              • Combination of visual and mechanical polarity protection ensures correct installation of batteries
                              • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                              3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                              • Kit includes:
                                • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                                • Streamlight Helmet Mount
                                • Rubber Helmet Strap


                              4AA ProPolymer® LED
                              • Powered by 4 "AA" alkaline batteries
                              • 7 ultra-bright 100,000-hour life LEDs
                              • 67 lumens typical with 7 white LEDs, blue LEDs also available


                                4AA ProPolymer® Lux Div 1
                                • C4® LED technology, with a 50,000 hour lifetime.
                                • Unbreakable polycarbonate lens with scratch-resistant coating.
                                • 100 lumens typical; up to 4,200 candela peak beam intensity.


                                  4AA ProPolymer® Xenon
                                  • Powered by 4 "AA" alkaline batteries
                                  • Features a xenon gas-filled module
                                  • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                                    Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
                                    • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                    • Features a 210 degree articulating head that rotates a full 360 degrees
                                    • 4 lighting modes
                                    • Optimized electronics provide regulated intensity


                                    Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
                                    • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                    • Features a 210 degree articulating head that rotates a full 360 degrees
                                    • 4 lighting modes
                                    • Optimized electronics provide regulated intensity


                                    Survivor® (Alkaline Model)
                                    • Click here for Data Sheet
                                    • Available in rechargeable and alkaline models
                                    • Features C4® LED technology with four lighting modes:
                                      • High for a super-bright beam that pierces through smoke
                                      • Low for bright light and longer run time
                                      • Flash for signaling
                                      • Moonlight mode provides low-level lighting for battery conservation
                                    • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                                    • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


                                    3AA HAZ-LO® LED Headlamp
                                    • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
                                    • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
                                    • Push-button on/off switch easy to use even when wearing heavy gloves
                                    • Intrinsically safe – Class I, Div 1


                                      3AA HAZ-LO® LED Headlamp
                                      • ATEX-rated for Category 1G (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <200°C
                                      • RoHS compliant
                                      • C4® LED delivers 120 lumens; 6,800 candela; 165 meter beam distance, runs 11 hours
                                      • Parabolic reflector produces long range brilliance and smooth uniform beam pattern
                                      • Push-button on/off switch easy to use even when wearing heavy gloves


                                      3AA ProPolymer® HAZ-LO®
                                      • SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations
                                      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                                      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                                      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                                      • Combination of visual and mechanical polarity protection ensures correct installation of batteries
                                      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                                      3AA ProPolymer® HAZ-LO® 7 LED
                                      • Rated for Zone 0 locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum surface temperature of <135°C
                                      • A cluster of seven 5mm LEDs provide a soft, wide beam for tasks at arm’s length and other up-close task lighting
                                      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                                      • "Captured locking" set screw will not back out - prevents FOD (Foreign Object Debris)
                                      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment


                                      3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                                      • Kit includes:
                                        • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                                        • Streamlight Helmet Mount
                                        • Rubber Helmet Strap


                                      Survivor® (Low Profile) ATEX (Alkaline Model)
                                      • Rated for Zone 0. The redesigned Survivor features a low-profile bezel that doesn’t interfere with gear and equipment. We also redesigned the clip and added a reinforced D-ring so your light hangs forward
                                      • Available in rechargeable and non-rechargeable models
                                      • Features C4® LED technology with four lighting modes: High, Low, Flash and Moonlight
                                      • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                                      • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation
                                      • Optimized electronics provide regulated intensity
                                      • IP66 water-resistant; 2 meter impact resistance tested


                                      Survivor® LED (Alkaline Model)
                                      • ATEX-rated for Category 1G (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <135°C
                                      • Available in rechargeable and alkaline models
                                      • Features C4® LED technology with four lighting modes: High, Low, Flash and Moonlight
                                      • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications
                                      • Optimum peripheral illumination to aid in navigation
                                      • Spring loaded clip with built-in ring easily attaches to belts and harnesses
                                      • IP54 water-resistant; 2 meter impact resistance tested


                                      Knucklehead® HAZ-LO® – Flood Model
                                      • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                      • Features a 210 degree articulating head that rotates a full 360 degrees
                                      • 4 lighting modes
                                      • Optimized electronics provide regulated intensity


                                      Knucklehead® HAZ-LO® – Spot Model
                                      • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                      • Features a 210 degree articulating head that rotates a full 360 degrees
                                      • 4 lighting modes
                                      • Optimized electronics provide regulated intensity


                                      Survivor® (Low Profile) ATEX
                                      • Rated for Zone 0. The redesigned Survivor features a low-profile bezel that doesn’t interfere with gear and equipment. We also redesigned the clip and added a reinforced D-ring so your light hangs forward
                                      • Available in rechargeable and non-rechargeable models
                                      • Features C4® LED technology with four lighting modes: High, Low, Flash and Moonlight
                                      • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                                      • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation
                                      • Optimized electronics provide regulated intensity
                                      • Industrial rechargeable lithium ion battery can be recharged up to 1,500 times. Also accepts four "AA" alkaline or lithium non-rechargeable batteries
                                      • IP66 water-resistant; 2 meter impact resistance tested


                                      Survivor® LED
                                      • ATEX-rated for Category 2G (Zone 1) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C
                                      • Available in rechargeable and alkaline models
                                      • Features C4® LED technology with four lighting modes: High, Low, Flash and Moonlight
                                      • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications.
                                      • Optimum peripheral illumination to aid in navigation
                                      • Spring loaded clip with built-in ring easily attaches to belts and harnesses
                                      • Industrial rechargeable NiCd battery can be recharged up to 1,000 times. Also accepts four "AA" alkaline non-rechargeable batteries for fast replacement with readily available batteries
                                      • IP54 water-resistant; 2 meter impact resistance tested


                                      Knucklehead®
                                      • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
                                      • Shockproof dual C4® premium LED technology delivers 200 lumens
                                      • Features a 210 degree articulating head that rotates a full 360 degrees
                                      • 4 modes:
                                        High – 1150 candela peak beam intensity, 200 Lumens, 3.5 hour runtime
                                        Low – 350 candela peak beam intensity, 63 lumens, 16 hour runtime
                                        Moonlight – 20 day runtime
                                        Flash – 8 hour runtime


                                        Knucklehead® HAZ-LO® – Flood Model
                                        • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                        • Features a 210 degree articulating head that rotates a full 360 degrees
                                        • 4 lighting modes
                                        • Optimized electronics provide regulated intensity


                                        Knucklehead® HAZ-LO® – Spot Model
                                        • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                        • Features a 210 degree articulating head that rotates a full 360 degrees
                                        • 4 lighting modes
                                        • Optimized electronics provide regulated intensity


                                        Knucklehead® Spot
                                        • Click here for Data Sheet
                                        • Shockproof C4® premium LED technology combined with a deep dish parabolic reflector produces a focused beam for longer distances – 210 meters on high beam.
                                        • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
                                        • Features a 210 degree articulating head that rotates a full 360 degrees


                                        Knucklehead® with Clip
                                        • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
                                        • Shockproof dual C4® premium LED technology delivers 200 lumens
                                        • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
                                        • Features a 210 degree articulating head that rotates a full 360 degrees


                                          Siege® AA
                                          • Multiple modes:
                                            • White LED (one C4® LED) with cover removed:
                                            • Red LED (two red LEDs)
                                          • Polycarbonate glare-reducing cover provides soft, even 360° light distribution; comfortable to use in close quarters without impairing vision; cover is removable to illuminate large areas
                                          • Stand it upright or to use as an overhead light or hang it with D-ring on base of lantern
                                          • Incorporated D-ring on bottom of lantern is spring-loaded to stow against the light, out of the way when not in use


                                          Siege® AA Pink
                                          • Click here for Data Sheet
                                          • For every Breast Cancer Research Foundation® Siege® AA Pink sold, Streamlight will donate $2 to the Breast Cancer Research Foundation.
                                          • Multiple modes: White LED (Low, Medium, High) and Red LED (Flash SOS, Red LED High)
                                          • Polycarbonate glare-reducing cover provides soft, even 360° light distribution; comfortable to use in close quarters without impairing vision; cover is removable to illuminate large areas
                                          • Stand it upright or hang it with D-ring on base of lantern to use as an overhead light
                                          • Incorporated D-ring on bottom of lantern is spring-loaded to stow against the light, out of the way when not in use


                                          Siege® AA with Magnetic Base
                                          • Click here for Data Sheet
                                          • Multiple modes: White LED (Low, Medium, High) and Red LED (Flash SOS and Red LED High)
                                          • Polycarbonate glare-reducing cover provides soft, even 360° light distribution; comfortable to use in close quarters without impairing vision; cover is removable to illuminate large areas
                                          • “Stick” it to steel surfaces for hands-free use
                                          • Stand it upright or hang it with D-ring on base of lantern to use as an overhead light
                                          • Incorporated D-ring on bottom of lantern is spring-loaded to stow against the light, out of the way when not in use

                                           
                                          ; Cache: True
                                           Page:  Flush: