Product Selector

24 Results Found

Stylus Reach® – UL Model
  • High-intensity white LED
  • 140 Candela peak beam intensity, 11 lumens
  • Uses three "AAAA" size alkaline batteries (included)
  • Seven-inch extension cable allows for 14" (35.6cm) of reach
  • Intrinsically safe.


2AA ProPolymer® Xenon
  • Powered by 2 "AA" alkaline batteries
  • Xenon gas-filled bi-pin bulb
  • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


3C ProPolymer® LED
  • Powered by 3 "C" alkaline batteries
  • 10 ultra-bright 100,000-hour life LEDs
  • 85 lumens typical with 10 white LEDs, blue LEDs also available


    3C ProPolymer® Xenon
    • Powered by 3 "C" alkaline batteries
    • 785 mA xenon gas-filled module
    • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


      3N ProPolymer® LED
      • Powered by 3 "N" alkaline batteries
      • 3 ultra-bright 100,000-hour life LEDs
      • LEDs provide up to 30 lumens, blue LEDs also available


        4AA ProPolymax®
        • TEN-TAP® programmable switch allows user selection of one of three different programs:
          • high/low/strobe (factory default)
          • high only
          • low/high 
        • C4® LED output:
          • High: 300 lumens; 17,000 candela; runs 2.75 hours
          • Low: 50 lumens; 2,500 candela; runs 24 hours
          • Strobe runs 6 hours
        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


        4AA ProPolymer® LED
        • Powered by 4 "AA" alkaline batteries
        • 7 ultra-bright 100,000-hour life LEDs
        • 67 lumens typical with 7 white LEDs, blue LEDs also available


          4AA ProPolymer® Lux Div 2
          • C4® LED technology, with a 50,000 hour lifetime.
          • Unbreakable polycarbonate lens with scratch-resistant coating.
          • 100 lumens typical; up to 4,200 candela peak beam intensity.


            4AA ProPolymer® Xenon
            • Powered by 4 "AA" alkaline batteries
            • Features a xenon gas-filled module
            • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


              2AA ProPolymer® Xenon
              • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
              • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
              • Powered by two "AA" alkaline batteries (included)
              • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
              • IP57 rated design; dust and water ingress protected


              3C ProPolymer® LED
              • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
              • 10 ultra-bright white 100,000-hour life LEDs deliver 54 lumens; runs 336 hours
              • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
              • Waterproof/Dustproof IP65


              3C ProPolymer® Xenon
              • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
              • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
              • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
              • Waterproof/Dustproof IP65


              4AA ProPolymer® LED
              • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
              • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
              • Powered by four "AA" alkaline batteries (included)
              • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
              • Push-button tail switch for momentary or constant “on”
              • Waterproof/Dustproof IP65


              4AA ProPolymer® LUX
              • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
              • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
              • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
              • Uses four "AA" alkaline batteries (included)
              • IP67; waterproof to 1 meter for 30 minutes


              4AA ProPolymer® Xenon
              • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
              • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
              • Powered by four "AA" alkaline batteries
              • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
              • Push-button tail switch for momentary or constant “on”
              • Waterproof/Dustproof IP65


              Survivor® LED (Alkaline Model)
              • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp)continually preset. It has a maximum adverse surface temperature of <135°C.
              • Available in rechargeable and alkaline models
              • Features C4® LED technology with four lighting modes
              • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
              • IP54 water-resistant; 2 meter impact resistance tested


              2AA ProPolymer® Xenon
              • Powered by 2 "AA" alkaline batteries
              • Xenon gas-filled bi-pin bulb
              • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


              3C ProPolymer® LED
              • Powered by 3 "C" alkaline batteries
              • 10 ultra-bright 100,000-hour life LEDs
              • 85 lumens typical with 10 white LEDs, blue LEDs also available


                3C ProPolymer® Xenon
                • Powered by 3 "C" alkaline batteries
                • 785 mA xenon gas-filled module
                • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


                  3N ProPolymer® LED
                  • Powered by 3 "N" alkaline batteries
                  • 3 ultra-bright 100,000-hour life LEDs
                  • LEDs provide up to 30 lumens, blue LEDs also available


                    4AA ProPolymer® LED
                    • Powered by 4 "AA" alkaline batteries
                    • 7 ultra-bright 100,000-hour life LEDs
                    • 67 lumens typical with 7 white LEDs, blue LEDs also available


                      4AA ProPolymer® Xenon
                      • Powered by 4 "AA" alkaline batteries
                      • Features a xenon gas-filled module
                      • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                        Stylus Reach® – UL Model
                        • High-intensity white LED
                        • 140 Candela peak beam intensity, 11 lumens
                        • Uses three "AAAA" size alkaline batteries (included)
                        • Seven-inch extension cable allows for 14" (35.6cm) of reach
                        • Intrinsically safe.


                        Stinger®
                        • Xenon gas-filled bi-pin bulb; spare bulb in tailcap
                        • Adjustable focus beam
                        • Up to 11,000 candela (peak beam intensity); 90 lumens

                           
                          ; Cache: False
                           Page:  Flush: